• Journal of Preventive Medicine and Public Health
• /
• v.33 no.2
• /
• pp.157-164
• /
• 2000

Objectives : This study was peformed to determine the reference values of blood lead, manganese, aluminium, and silicon in healthy adults. Methods : The subjects were 132 (67 male and 65 female), and classified to three age groups $(\leq39,\;40\sim49,\;and\;50\leq)$. Blood lead, manganese and aluminium were analyzed by atomic absorption spectrophotometer, and blood silicon was analyzed by direct current plasma optical emission spectrometer. Results : Blood lead levels(geometric mean, S.D) were (3.49, 1.70) ${\mu}g/dL$ in male and (3.04, 1.65) ${\mu}g/dL$ in female, but the difference is not significant, and there was no significant difference between age groups. Mean blood manganese level was $0.99{\pm}0.41{\mu}g/dL$, and there was no significant difference between sex or age groups. Mean blood aluminium level was $0.59{\pm}0.35{\mu}g/dL$, and there was no significant difference between sex or age groups. Mean blood silicon level was $54.41{\pm}27.64{\mu}g/dL$ in male and $43.34{\pm}23.51{\mu}g/dL$ in female, and the level in male was significantly higher than that in female (p<0.05). There was significant difference between age groups, and the oldest showed the highest level in male (p<0.05), but no significant difference between age groups in female. Conclusions : Authors hope that this study would provide basic data for determining reference values and evaluating health effects.

• Journal of the Korean Society of Radiology
• /
• v.6 no.1
• /
• pp.73-77
• /
• 2012

Recently, Interest to the photoconductor, which is used to flat form X-ray detector such as a-Se, $HgI_2$, PbO, CdTe, $PbI_2$ etc. is increasing. In this study, the film layer by using the photoconductive material with particle sedimentation was fabricated and evaluated. The quantization efficiency of the continuous X-ray with the 70 kVp energy bandwidth was analyzed by using the Monte Carlo simulation. With the results, the thickness of film with 64 % quantization efficiency was 180 ${\mu}m$ which is similar to the efficiency of 500 ${\mu}m$ a-Se film. And $HIg_2$ film has the high quantization efficiency of 74 % on 240 ${\mu}m$ thickness. The electrical characteristics of the 239 ${\mu}m$ $Hgl_2$ films produced by particle sedimentation were shown as very low dark current(under 10 $pA/mm^2$), and high sensitivity(19.8 mC/mR-sec) with 1 $V/{\mu}m$ input voltage. The SNR, which is influence to the contrast of X-ray image, was shown highly as 3,125 in low driving voltage on 0.8 $V/{\mu}m$. With the results of this study, the development of the low-cost, high-performance image detector with film could be possible by replacing the film produced by particle sedimentation instead to a-Se detector.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1078-1086
• /
• 1996

The peroxo-polytungstic acid was formed by the direct reaction of tungsten powder with the hydrogen peroxide solution. Peroxo-polytungstic powder were prepared by rotary evaporator using the fabricated on to ITO coated glass as substrate by dip-coating method using $2g/10mL(W-IPA/H_2O)$ sol solution. A substrate was dipped into the sol solution and after a meniscus had settled, the substrate was withdrawn at a constant rate of the 3mm/sec. Thicker layer could be built up by repeated dipping/post-treatment 15 times cycles. The layers dried at the temperature of $65{\sim}70^{\circ}C$ during the withdrawn process, and then tungsten oxides thin film was formed by final heating treatment at the temperature of $230{\sim}240^{\circ}C$ for 30min. A linear rotation between the thickness of thin film and the number of dipping/post-treatment cycles for tungsten oxides thin films made by dip-coating was found. The thickness of thin film had $60{\AA}$ after one dipping. From the patterns of XRD, the structure of tungsten oxides thin film identified as amorphous one and from the photographs of SEM, the defects and the moderate cracks were observed on the tungsten oxides thin film, but the homogeneous surface of thin films were mostly appeared. The electrochemical characteristic of the $ITO/WO_3$ thin film electrode were confirmed by the cyclic voltammetry and the cathodic Tafel polaization method. The coloring bleaching processes were clearly repeated up to several hundreds cycles by multiple cyclic voltammetry, but the dissolved phenomenon of thin film revealed in $H_2SO_4$ solution was observed due to the decrease of the current densities. The diffusion coefficient was calculated from irreversible Randles-Sevick equation from the data obtained by the cyclic voltammetry with various scan rates.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.3
• /
• pp.331-338
• /
• 2000

Background : While the incidence of lung cancer is gradually leveling off in developed countries, it is continuing to rise in Korea. With the rapid increase in the prevalence of smoking among women and the young, the incidence of lung cancer is also expected to increase within the next three and four decades. The aims of the present study are to analyze the smoking habits in patients with lung cancer and to evaluate of the relative risk of lung cancer according to patients' smoking habits. Method : This investigation was a hospital-based, case control study, which included data of 93 case subjects with lung cancer and 1132 controls with disease unrelated to smoking, obtained through a smoking history questionnaire by a direct personal interview. Result : Compared with non-smokers, those who smoked for more than 50 years had an odds ratio for lung cancer of 8.8(1.8-20.7). The odds ratios was 8.5(3.5-20.7) for those who smoke more than a total of 40 cigarettes per day and 5.5(2.3-13.3) for men who started habitual smoking under the age of 20. The risk increased for men with more than of cigarette smoking(OR : 5.5, 95% CIa : 2.6-11.9). Odds ratios associated with cigarette smoking were 2.5(1.1-5.8) and 5.1(2.6-10.4) for ex-smokers and current smokers, respectively and 2.2(0.0-4.6) for non-filter smokers of more than 16 years. Conclusion : There was a clear dose-response relationship between the risk of lung cancer and smoking. It can be concluded that dose is an important risk factor for lung cancer, as well as smoking habits.

• KDI Journal of Economic Policy
• /
• v.32 no.2
• /
• pp.171-216
• /
• 2010

With the payment and settlement systems becoming more and more complex and interconnected, the issue of their interdependency rises as an important academic issue as well as a policy topic. This study examines causes, forms, and risk management of interdependencies of payment and settlement systems in Korea, and presents their current situation. By way of simulations using BOF-PSS2 developed by the Bank of Finland, we quantify the effects of an operational disruption on the payment and settlement systems so as to figure out the degree of interdependency. As a result, the secondary round effect reaches up to ￦13.6 trillion a day, which amounts to 7.8% of the daily settlement value. Furthermore, if we also consider the amount of direct operational disruption, the volume of operational disruption occupies 22.3% of total value of the daily settlement, evidencing that the interdependencies of the payment and settlement systems in Korea is enormously widespread. The secondary round effects are found to be more severe with security companies rather than with banks, and to be more depended upon when it is perceived rather than it actually happens. In case that we expand the liquidity to include cash holdings and deposits as assets, the secondary round effect dramatically decreases in all types of financial institutions while foreign banks account for more share of all the secondary round effects increases. Based on these results, we suggest various policy tasks and directions to improve the risk management of settlement systems: expansion of off-setting settlements, introduction of a new settlement system for securities transactions, rapid provision of liquidity to financial institutions, more effective monitoring on participant institutions, and intensified information sharing and cooperation among the systems.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.1
• /
• pp.42-54
• /
• 2016

It is highly anticipated that warming temperature resulting from global climate change will affect the phenological pattern of kiwifruit, which has been commercially grown in Korea since the early 1980s. Here, we present the potential impacts of climate change on the variations of flowering day of a gold kiwifruit cultivar, Haegeum, in the Jeonnam Province, Korea. By running six global climate models (GCM), the results from this study emphasize the uncertainty in climate change scenarios. To predict the flowering day of kiwifruit, we obtained three parameters of the 'Chill-day' model for the simulation of Haegeum: $6.3^{\circ}C$ for the base temperature (Tb), 102.5 for chill requirement (Rc), and 575 for heat requirement (Rh). Two separate validations of the resulting 'Chill-day' model were conducted. First, direct comparisons were made between the observed flowering days collected from 25 kiwifruit orchards for two years (2014-15) and the simulated flowering days from the 'Chill-day' model using weather data from four weather stations near the 25 orchards. The estimation error between the observed and simulated flowering days was 5.2 days. Second, the model was simulated using temperature data extracted, for the 25 orchards, from a high-resolution digital temperature map, resulting in the error of 3.4 days. Using the RCP 4.5 and 8.5 climate change scenarios from six GCMs for the period of 2021-40, the future flowering days were simulated with the 'Chill-day' model. The predicted flowering days of Haegeum in Jeonnam were advanced more than 10 days compared to the present ones from multi-model ensemble, while some individual models resulted in quite different magnitudes of impacts, indicating the multi-model ensemble accounts for uncertainty better than individual climate models. In addition, the current flowering period of Haegeum in Jeonnam Province was predicted to expand northward, reaching over Jeonbuk and Chungnam Provinces. This preliminary result will provide a basis for the local impact assessment of climate change as more phenology models are developed for other fruit trees.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.7 no.1
• /
• pp.29-50
• /
• 2001

This research have been made to define how the IADL (Instrumental Activity of Daily Living) performance and the subjective health index of the Aged are affected by their residential circumstance, gender and age, and how deeply these two factors are related and interact. For the period of June 1 to July 31, 2000, we had conducted a questionnaire and direct interview with 693 persons over age sixty-five (65) in Daejon and in other adjacent area, grouping into three different residential types The Aged living at home, The Aged living at welfare facilities and The Aged living alone, and studied on how the IADL performance and the subjective health index of the Aged are influenced and interact as per their characteristics, daily activity and mentality. We had analyzed all the data obtained through this research by the method of : - analysis of frequency as per specific factors by SPSS 1O.0/PC+, - $x^2$ test, - t-test, - ANOVA, - multiple regression analysis by factors. The research concludes followings : a. It appears that the three (3) factors such as gender, age and residential circumstance of the Aged deeply affect the IADL performance and subjective health index of the Aged. (p<0.01) b. With regard to IADL performance of the Aged by the gender, it was analyzed that the female-Aged gains 23.8 point on average, which shows the performance of the female-Aged is less independent. (p<0.01). In addition, it was also found that the IADL performance is becoming less and less independent following their age increasing. In analyzing IADL performance by the residential type, it appears that the Aged living at welfare facilities gains the lowest 21.5 points and is least independent. It was also found that the Aged living at welfare facilities need some assistances from others for their performing IADL. (20-24 point) (p<0.001) c. With regard to the subjective health index of the all-Aged participated in this research, the analysis indicates 8.8 point and this is considered as a point of general standard (7-10 point). In analyzing this index by the gender, the female-Aged gains only 8.6 point which explains a lot of female-Aged consider they are not really healthy. (p<0.001) In analyzing this index by the residential type, the Aged living at welfare facilities and the Aged living alone gain the comparatively lower point, - respectively 8.4 point for the Aged living at welfare facilities and 8.8 point for the Aged living alone. The Aged living at these two residential types express they are obviously in a bad situation of health. (p<0.001) d. With regard to the factors affecting the IADL performance and the subjective health index of the Aged, it was analyzed that the IADL performance can largely be affected by the factors such as depression, frequency of going-out and age rising, and that the subject health index can also deeply be affected by depression, pain and by how much they are satisfied with their current living conditions. e. It was analyzed that the interacting between the IADL performance and the subjective health index is not that strong but even weak. As a result, we were able to conclude that the IADL performance is less independent in case of the female-Aged, the Aged living at welfare facilities, and following the age rising. As for the subjective health state the Aged themselves are aware of, we concluded that the female-Aged, the Aged living at welfare facilities and the Aged living alone, are more critical about their health. From this research, we were able to realize that, when the OMT (Orthopedic Manual Therapy) needed, the physical therapists are really required to have a correct and cautious understanding of the situation in which the aged persons are, and take care of them with more concerns and more improved treatment.

• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.148-162
• /
• 1993

There is much speculation that modern capi-talist society is undergoing fundamental and qualitative chnge towards flexible specialization. The purpose of this study is to examine this hypothesis. This paper focusses on: the idea of flexible specialization; the significance of this transition; industrial district; and the implicati-ons of this new production system for Korean industrial space. Main arguments of this study are as follows: First, as all different groups of researchers apply the idea of flexible specialization according to their own specifications, the current debate on this topic is not much fruitful. Not surpri-singly, the concept of flexible specialization has overlapped with subocontracting. This intergration of subcontracting into flexible specialization systems, however, is inappropriate because the two concepts have different historical contexts. The other cause of this controversy is its inherent weekness, conceptual ambiguity. Thus, today's flexibility becomes tomorrow's rigidity. Secondly, transition towards flexible speciali-zation has only been partially achieved even in advanced capitalist countries. The application of dualistic explanatory framework, such as rigidity versus flexibiity, mass production versus small-lot multi-product production, and de-skilling versus re-skilling, has resulted in great exaggeration of the transformation, from Fordism to post-Fordism. There is no intermediary part between two places. Considering that the workers allocated to the Fordist mass production assembly line are not as large as one might imagine, the shift from mass to flexible production has only limited implications for the transformation of capitalist economy. Thirdly, 'industrial district' contorversy has contributed to highlighting the importance of small firms and areas as production space. The agglomeration of small firms in specific areas is common in Korea, but it is quite different from the industrial district based on flexible specialization. The Korean phenomenon stems from close interactions with its major parent firm rather than interactions between flexible, specialized, autonomous and technology-intensive smll firms. Most Korean subcontractors are still low-skilled, labour-intensive, and heavily dependent on their mojor parent firms. Thus, the assertion that the Seoul Metropolitan Area adopts flexible specialization has no base. Fourthly, the main concern of flexible speciali zation is small firms. However, the corporate organization that needs product diversification and technological specialization is oligopolistic large corporations typified by multinational corporations. It is because of this that most of these organizations are adoptiong Fordist mass production methods. The problem of product diversification will be resolved naturally if economic internationalization progresses further. What is more important for business success is the quality and price competitiveness of firms rather than product diversification. Lastly, in order to dispel further misunderst-anding on this issue, it is imparative that the conceptual ambiguity is resolved most urgently. This study recommends adoption of more speci-fied and direct terminology (such as, factory automation, computer design, out-sourcing, the exploitation of part-time labor, job redesign) rather than that of ideological ones (such as, Taylorism, Fordism, neo-Taylorism, neo-Fordism, post-fordism, flexible specialization, peripheral post-Fordism). As the debates on this topic just started, we still have long way to go until consensus is reached.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.1
• /
• pp.60-65
• /
• 2008

Current soil remediation principles for toxic metals have some limitations even though they vary with different technologies. An alternative technology that transforms hazardous substances into nonhazardous ones would be environmentally beneficial. Objective of this research was to assess optimum conditions for Cr(VI) reduction in soils as influenced by ZVI(Zero-Valent Iron), organic matter and moisture content. The reduction ratio of Cr(VI) was increased from 37 to 40% as organic matter content increased from 1.07 to 1.75%. In addition, Cr(VI) concentration was reduced as soil moisture content increased, but the direct effect of soil moisture content on Cr(VI) reduction was less than 5% of the Cr(VI) reduction ratio. However, combined treatment of ZVI(5%), organic matter(1.75%) and soil moisture(30%) effectively reduced the initial Cr(VI) to over 95% within 5 days and nearly 100% after 30 days by increasing oxidation of ZVI and concurrent reduction of Cr(VI) to Cr(III). The overall results demonstrated that ZVI was effective in remediating Cr(VI) contaminated soils, and the efficiency was synergistic with the combined treatments of soil moisture and organic matter.