• 제목/요약/키워드: Direct conversion receiver

검색결과 77건 처리시간 0.032초

DC-Offset 간섭환경에서 AC-Coupling을 갖는 직접변환 수신기의 성능 (Performance of Direct-Conversion Receiver with AC-Coupling in DC-Offset interference environment)

  • 성봉훈;송윤정;김영완;김내수;서종수
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2002년도 정기총회 및 학술대회
    • /
    • pp.9-14
    • /
    • 2002
  • Direct-conversion receiver(DCR) architecture has superior advantages in size, cost, and power over superheterodyne receiver architectures. However, the use of direct-conversion receiver architecture has been limited due to the direct-current offset noise. The ac coupling, which is used to overcome the direct-current offset noise, causes an inter-symbol interference(ISI), whose effects can be effectively mitigated using an equalizer. In this paper, the performance of a direct-conversion receiver with ac coupling in the presence of direct-current offset is analyzed via computer simulation. The simulation result shows that by using decision feedback equalizer with LMS(Least Mean Square) algorithm, signal-to-noise ratio loss of the direct-conversion receiver compared to the idea receiver can be reduced to less than 1㏈ for corner frequencies as large as 10% of the symbol rate.

  • PDF

BPSK 복조를 위한 K-Band CMOS Four-Port 직접 변환 수신기 설계 (Design of K-Band CMOS Four-Port Direct Conversion Receiver for BPSK Demodulation)

  • 문성모;박동훈;유종원;이문규
    • 한국전자파학회논문지
    • /
    • 제21권2호
    • /
    • pp.129-135
    • /
    • 2010
  • 본 논문에서는 K-band 응용을 위한 $0.18\;{\mu}m$ CMOS 공정을 기반으로 한 새로운 방색의 four-port BPSK 직접 변환 수신기를 제안하고 검증한다. 제안한 직접 변환 수신기는 두 개의 능동 결합기, 집중 소자 LC 발룬, 두 개의 전력 검출기, 그리고 아날로그 디코더로 구성되어 있다. 설계된 직접 변환 수신기는 K-bnad 반송파 주파수의 데이터율 40 Mbps까지의 BPSK 변조 신호를 성공적으로 복조하였다.

직접 변환수신기 (direct conversion receiver)에 적합한 DC offset이 없는 주파수 변환기를 채용한 직접변환 수신기의 설계 (Direct Conversion receiver adapting DC offset free diode mixer)

  • 박필재;유현규;조한진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
    • /
    • pp.361-364
    • /
    • 2000
  • One of the problems using DCR(Direct Conversion Receiver) are DC offset, poor channel selectivity. APDP(Anti Parallel Diode Pair) can be good candidate for DCR frequency mixer due to its inherent End harmonic suppression. APDP shows good IP2 and DC suppression. This paper describe single APDP LO power characteristics, IP2, and receiver structure utilizing APDP frequency mixer

  • PDF

AWGN 채널환경에서 Direct-Conversion 수신기의 성능분석에 관한 연구 (A Study on a Performance Analysis of Direct-Conversion Receiver In Additive White Gaussian Noise Channel)

  • 조형래;김철성;박성진
    • 한국정보통신학회논문지
    • /
    • 제5권4호
    • /
    • pp.668-675
    • /
    • 2001
  • 최근, 상업적인 pcs시스템은 매우 발전되어 있으며, 결국 차세대 이동통신은 멀티미디어 서비스를 제공하는 IMT-2000에 의해 실현될 것이다. 그러므로 , 새로운 형태의 수신 시스템 연구가 활발히 진행되고 있고, 이중하나가 Direct conversion 방식이다 Direct conversion은 차세대 이동통신 시스템에 필요한 저전력, 소형, MMIC, 저가에 적합한 방식이다. 이 시스템을 사용할 경우 DC-offset의 문제가 발생하게 된다. DC-offset은 시스템에서 주파수 합성기의 누설신호에 의해 원하는 신호의 증폭을 억압한다. 본 논문에서 DC-offset을 제거하는 방법에 대해 고려한다. DC-offset의 제거법에는 AC-coupling, 대용량 capacitor, DC-feedback loop, DC-free coding의 4가지 방법이 있다. 이중에서 AC-coupling법은 가장 간단하며, DC-feedback법은 최고의 성능을 가진다. AC-coupling법과 DC-feedback법을 HP사의 ADS를 사용하여 시뮬레이션 하였다.

  • PDF

수동형 RFID 시스템 적용을 위한 SAW ID 태그 및 수신 시스템 구현 (SAW ID Tag and Receiver System for Passive RFID System Application)

  • 김재권;박주용;범진욱
    • 대한전자공학회논문지SD
    • /
    • 제45권4호
    • /
    • pp.64-71
    • /
    • 2008
  • SAW(Surface Acoustic Waves)를 기반으로 passive RFID(Radio Frequency IDentification) tag 및 송수신 시스템을 제작하였다. Pulse position encoding 방식의 SAW ID 태그(tag)를 제작하여 amplitude on/off 방식의 SAW ID 태그에 비해 3배의 데이터 용량 증대 효과를 얻을 수 있었다. 또한, 수신 시스템을 heterodyne 방식과 direct conversion 방식으로 제작하였다. 측정 결과 direct conversion 방식으로 제작된 수신 시스템이 heterodyne 방식의 수신 시스템과 비교하여 isolation 특성이 10 dB 증가하였으며, 그 결과 무선 도달 거리가 증가했다.

직접변환 수신기용 가변 차단주파수특성을 갖는 CMOS Gm-C 저역통과필터 설계 (The Design of A CMOS Gm-C Lowpass Filter with Variable Cutoff Frequency for Direct Conversion Receiver)

  • 방준호
    • 전기학회논문지
    • /
    • 제57권8호
    • /
    • pp.1464-1469
    • /
    • 2008
  • A CMOS Gm-C filter with variable cutoff frequency applicable for using in the direct conversion receiver is designed. The designed filter comprises the CMOS differential transconductors, and the gm of the transconductor is controlled by the bias voltage. This configuration can compensate variant of the cutoff frequency which could be generated by external noises, and also be used in multiband receiver. As a results of HSPICE simulation, the control range of the cutoff frequency is $1.5MHz{\sim}3.5MHz$ and the gain control range is $-2.8dB{\sim}2.6dB$. The layout of the designed 5th-order Elliptic low-pass filter is performed to fabricate a chip using $2.5V-0.25{\mu}m$ CMOS processing parameter.

직접변환수신기에 적합한 주파수 혼합기의 특성분석 (Frequency Miner Characteristics for Direct Conversion Receiver)

  • 박필재;유현규;조한진
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
    • /
    • pp.154-157
    • /
    • 2000
  • One of the problems using DCR(Direct Conversion Receiver) type architecture are DC offset, Poor channel selectivity. APDP(Anti Parallel Diode Pair) can be mood candidate for the DCR frequency mixer due to its inherent 2nd harmonic suppression. APDP shows good IP2 and DC suppression. This paper describes single APDP LO power characteristics, IP2, and receiver structure utilizing APDP frequency mixer.

  • PDF

Technology trends in direct conversion receivers

  • Lee, Sang-Gug;Vladimir Krizhanovskii
    • 전자공학회지
    • /
    • 제29권9호
    • /
    • pp.48-67
    • /
    • 2002
  • Basic introduction to direct conversion architecture was given in comparison with heterodyne one. Principal difficulties in implementation of direct conversion receiver were presented, current state of research in this field and classified, on the basis of extensive analysis of published materials.

  • PDF

6-단자를 이용한 직접 변환 수신 전 처리부 설계 (RF Front-end Design of Direct Conversion Receiver using Six-Port)

  • 장명신;김영완;고남영
    • 한국정보통신학회논문지
    • /
    • 제9권7호
    • /
    • pp.1534-1540
    • /
    • 2005
  • 직접 변환 방식은 혼합기를 사용하는 구조와 6-단자 회로를 사용하는 구조를 갖는다. 6-단자 회로를 사용하는 방식은 혼합기를 이용하는 방식보다 회로 구조가 간단하고 집적화도 쉬운 장점을 가지고 있다. 그리고 다이오드 작동을 위한 전압이 혼합기를 작동시키기 위한 전압보다 낮은 장점을 가지고 있으며 LO에서의 소비전력이 낮고 광대역으로 구현하기 유리한 점을 보이고 있다. 본 논문에서는 branch-line 결합기로 구성되는 6-단자 회로와 ring hybrid 결합기로 구성되는 6-단자 회로를 설계하고 성능을 비교 분석하였다.

6-단자를 이용한 직접 변환 수신 전 처리부 설계 (RF Front-end Design of Direct Conversion Receiver using Six-Port)

  • 장명신;양우진;오대호;김영완;고남영
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 추계종합학술대회
    • /
    • pp.481-484
    • /
    • 2005
  • 직접 변환 방식은 혼합기를 사용하는 구조와 6-단자 회로를 사용하는 구조를 갖는다. 6-단자 회로를 사용하는 방식은 혼합기를 이용하는 방식보다 회로 구조가 간단하고 집적화도 쉬운 장점을 가지고 있다. 그리고 다이오드 작동을 위한 전압이 혼합기를 작동시키기 위한 전압보다 낮은 장점을 가지고 있으며 LO에서의 소비전력이 낮고 광대역으로 구현하기 유리한 점을 보이고 있다. 본 논문에서는 branch-line 결합기로 구성되는 6-단자 회로와 ring hybrid 결합기로 구성되는 6-단자 회로를 설계하고 성능을 비교분석하였다.

  • PDF