• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.346-353
• /
• 2005

In this paper, the tension of assembly stay cable connected with massive anchorage block was calculated through back analysis of in-situ frequencies measured from a stadium structure. Direct approach to back analysis is adopted using the univariate method among the direct search methods as an optimization technique. The univariate method can search the optimal tension without regard to the initial ones and has a rapid convergence rate. To verify the reliability of back analysis, Tension formulas proposed by Zui et al. and Shimada were used. Tensions estimated by three methods are compared with the design tension, and are in a reasonable agreement with an error of more or less than 15%. Therefore, it is shown that back analysis applied in this paper is appropriate for estimation of cable tension force.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.4
• /
• pp.40-48
• /
• 1984

The computer program DASH(Direct Analysis of Ship's Hull), based on the direct calculating procedure as proposed at the 4th ISSC(1970), was developed. The DASH program is designed by the following calculation procedure: 1) Derivation of the design wave loads through the ship motion analysis based on the strip theory. 2) Stress analysis of the hull girder based on the 7-degree of the freedom beam theory including the warping torsion effect. 3) Long-term prediction of the stresses based on the statistical approach using sea-spectrums and ocean wave data in the ship's route. An example calculation was performed for the purpose of a demonstration of the present approach on the 16,200 DWT Oil Tanker. The results are discussed and compared with the conventional method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.435-440
• /
• 2004

In this paper, the tension of assembly stay cable connected with massive anchorage block was calculated through back analysis of in-situ frequencies measured from a stadium structure. Direct approach to back analysis is adopted using the univariate method among the direct search methods as an optimization technique. The univariate method can search the optimal tension without regard to the initial ones and has a rapid convergence rate. To verify the reliability of back analysis, Tension formulas proposed by Zui et al. and Shimada were used. Tensions estimated by three methods are compared with the design tension, and are in a reasonable agreement with an error of more or less than 15%. Therefore, it is shown that back analysis applied in this paper is appropriate for estimation of cable tension force.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.207-210
• /
• 2000

In this paper a theoretical formulation of the direct control relating the action exerted by the inverter space vectors on the stator flux and the torque of Induction motor is analyzed. From the equation the scheme of the inverter switching is proposed and influence of the stator flux and the electromagnetic torque in each switching pattern is also analyzed.

• The Magazine of the IEIE
• /
• v.29 no.9
• /
• pp.48-67
• /
• 2002

Basic introduction to direct conversion architecture was given in comparison with heterodyne one. Principal difficulties in implementation of direct conversion receiver were presented, current state of research in this field and classified, on the basis of extensive analysis of published materials.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.151-151
• /
• 2017

In Asia, rice production has some difficulties with reduction of farm household population and increase of elderly population. As a result, it has resulted in inefficiency and we needs to reduce labor force and improve labor productivity. Direct-seeding in rice could reduce labor and production costs, the area of direct seeding is increasing in japonica rice production in Asia. In direct seedling cultivation competition against weeds is one of most important concern. So, low temperature germinability and mesocotyl elongation should be considered. In this study, we evaluated the mesocotyl length and low temperature germination conducted association analysis using 137 korea core collections. An average length of mesocotyl among 137 core collections was skewed range from 0mm to 43mm. we searched candidate gene around target SNP. Such related traits, genome-wide association study (GWAS) analysis was carried out using GAPIT. Also, average mesocotyl length of 394 korea landrace cultivars was measured ranging from minimum 0 mm to maximum 34mm. 30 out of 394 Korea landrace cultivar conducted re-sequencing, and haplotype analysis of candidate gene. we searched these related resources, which including germination of low temperature and mesocotyl elongation. This could be used for the development of direct-seeding cultivars. The valiated accession of core collection and landrace cultivars will be used development of direct-seedling cultivar in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.138-147
• /
• 2011

The objective of this study which it sees direct shear stress and comparative analysis of flexural shear stress leads and it is a shear stress analysis which it follows in load direction of the structure which uses Perfobond Rib shear connectors. To analyze direct shear stress, five Perfobond Rib shear connect experiments were fabricated with five variables and conducted Push-out Tests. After experiments, mechanism of Perfobond Rib shear connector was examined and direct shear formula was proposed based on primary factors which influence direct shear stress. Also, for the analysis of flexural shear steel-concrete composite slab specimens were fabricated and static flexural test. Based on the static flexural test it analyzed the flexural behavior and the flexural shear stress it calculated. Direct shear stress and EN 1994-1-1 to lead and be calculated, it compared the flexural shear stress and it analyzed in about the shear resistance stress which it follows in load direction.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.3
• /
• pp.159-169
• /
• 2019

Purpose: The purpose of this study was to provide an effective method of exercise therapy for patients with cervicogenic headache. Methods: The subjects were divided into the following three groups according to the intervention received: cervix-stabilizing exercise (n=12, group 1), transcranial direct current stimulation (n=12, group 2), and cervix-stabilizing exercise combined with transcranial direct current stimulation (n=12, group 3). The intragroup and intergroup differences in muscle characteristics and neck disability index were compared and analyzed. Results: The comparison and analysis of the changes in muscle tone and post hoc analysis revealed statistically significant intragroup decreases in the upper trapezius and suboccipitals in groups I and III, and statistically significant intergroup differences in the upper trapezius, with greater changes in group III than in group II, and in the suboccipitals, with greater changes in groupIII than in groups Iand II. The comparison and analysis of the change in muscle stiffness and post hoc analysis revealed a statistically significanti ntra group decrease in the upper trapezius in group Iand suboccipitals in group III, and a statistically significant intergroup difference in both muscles, with greater change in group III than in group II. The comparison and analysis of change in neck disability index and post hoc analysis revealed a statistically significant intragroup decrease in all the three groups and a statistically significant intergroup difference, with greater change in group III than in groups I and II. Conclusion: The neck-stabilizing exercise and transcranial direct current stimulation were shown to be effective in decreasing the tone of the cervical muscles by stabilizing the cervical bone and improving muscle durability, and in improving the movement and limitation of joint range of motion by decreasing muscle tone and stiffness.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.523-538
• /
• 2013

To help improve the current government practice of direct damage-compensation policies, resulting from the loss of profit, sustained by Hanwoo farmers, as a result of the recent Korea-U. S. Free Trade Agreement (FTA), this research aims to examine any problems or issues caused by said policies. To accomplish this task, we have established Hanwoo-SIMO model and estimated the damage of Hanwoo farmers, one without the implementation of the FTA and another with the FTA, to compare and contrast the two. We then analyzed the efficacy of the current government policies. According to our analysis, the current direct compensation policies for the loss of profit on the part of Hanwoo farmers are insufficient. To address this problem, we recommend the government enact a new direct damagecompensation law to address the following issues. First, as the base formula of damage-compensation, the government should use current price of the beef rather than the annually changing flexible price. Second, the flexible control index should remain fixed at 1.0 rate while the government prepares the adequate amount of the damage compensating direct payment resulting from the FTA. Third, the direct government compensation policy should extend beyond the current 15 years (2013-2026) as the profit loss is expected to increase after the midpoint of the FTA.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.137-148
• /
• 2015

So far, the phenomenon of "electrification" has been deepened in Korean industry and especially direct heating energy which accounted for 44.0%(2010) of total energy consumed in Korean manufacturing has been significantly electrified. This paper decomposed electricity consumption for direct heating in Korean manufacturing from 1992 to 2012 using LMDI(Log Mean Divisia Index). This paper includes 4 different factors such as electricity proportion effect, direct heating proportion effect, energy intensity effect and added value effect. And this paper compared the consumption pattern by business type. As results, electricity proportion effect had contributed the most to the increase of electricity consumption for direct heating in Korean manufacturing. And Petrol-Chemical and Iron & Steel had the most electrification of direct heating.