• Advances in environmental research
• /
• v.7 no.1
• /
• pp.39-52
• /
• 2018

Direct membrane filtration (DMF) of wastewater has many advantages over conventional biological wastewater treatment processes. DMF is not only compact, but potentially energy efficient due to the lack of biological aeration. It also produces more biosolids that can be used to produce methane gas through anaerobic digestion. Most of ammoniacal nitrogen in wastewater is preserved in effluent and is used as fertilizer when effluent is recycled for irrigation. In this study, a technical feasibility of DMF was explored. Organic and nitrogen removal efficiencies were compared between DMF and membrane bioreactor (MBR). Despite the extremely high F/V ratio, e.g., $14.4kg\;COD/m^3/d$, DMF provided very high COD removal efficiencies at ~93%. Soluble microbial products (SMP) and extracellular polymeric substances (EPS) were less in DMF sludge, but membrane fouling rate was far greater than in MBR. The diversity of microbial community in DMF appeared very narrow based on the morphological observation using optical microscope. On the contrary, highly diverse microbial community was observed in the MBR. Microorganisms tended to form jelly globs and attach on reactor wall in DMF. FT-IR study revealed that the biological globs were structurally supported by feather-like materials made of secondary amines. Confocal laser scanning microscopy (CLSM) study showed microorganisms mainly resided on the external surface of microbial globs rather than the internal spaces.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2E
• /
• pp.3-13
• /
• 1997

The Jing is a traditional Korean percussion instrument which plays a major role in Korean folk music. The distingishing feature of this instrument is its unique, long lasting low tone timbre. In this paper, we investigated the vibro-acoustic characteristics of the Jing. Our attention was focused mainly on findings out the physical variables that determine its unique sound. By understanding the way in which the Jing is manufactured, we were able to realize that the unique manufacturing and especially the tuning process by expert craftsman is responsible for the peculiar timbre the Jing produces. The experimental methods implemented to analyzer the Jing were planar acoustic holography and direct measurements by accelerometers. The results from the holographic method and the direct measurements were in good agreement. It turned out that unlike most percussion instruments which have inharmonic partials, the Jing has harmonic partials which are responsible for its unique low-tone timbre. From the holographic representations of the modes, it is clear that the antinodes are located in the center of the Jing which is coincident with the typical striking location. In addition, intensity maps were constructed so that the specific acoustic energy flow can be visualized. It was also interesting to see the the circulation of energy intensity which corresponds to the rotating mode of the Jing.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.2
• /
• pp.159-171
• /
• 2012

Aerosol direct radiative forcing (ADRF) retrieval method was developed by combining data from passive and active satellite sensors. Aerosol optical thickness (AOT) retrieved form the Moderate Resolution Imaging Spectroradiometer (MODIS) as a passive visible sensor and aerosol vertical profile from to the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) as an active laser sensor were investigated an application possibility. Especially, space-born Light Detection and Ranging (Lidar) observation provides a specific knowledge of the optical properties of atmospheric aerosols with spatial, temporal, vertical, and spectral resolutions. On the basis of extensive radiative transfer modeling, it is demonstrated that the use of the aerosol vertical profiles is sensitive to the estimation of ADRF. Throughout the investigation of relationship between aerosol height and ADRF, mean change rates of ADRF per increasing of 1 km aerosol height are smaller at surface than top-of-atmosphere (TOA). As a case study, satellite data for the Asian dust day of March 31, 2007 were used to estimate ADRF. Resulting ADRF values were compared with those retrieved independently from MODIS only data. The absolute difference values are 1.27% at surface level and 4.73% at top of atmosphere (TOA).

• Journal of the Korean housing association
• /
• v.26 no.1
• /
• pp.91-98
• /
• 2015

The purposes of this study are to analyze the problems of the elderly using kitchens by ergonomic work evaluation methods, and to make suggestions for planning and remodeling of the kitchens for the elderly. The work evaluation methods which used in this study were direct-observing methods, which contained the process of 2 or 3 times each visiting to four different houses where elderly people live. For direct-observing methods, analyzing with movement observations and observation methods with photos and videos were used. Characteristics of subject elderly people and problems of their kitchens were analyzed by static measurements, interviews, pictures, and videos. The data, which are recorded movements of the preparing meal of the elderly were analyzed by playing it back repeatedly. As results, physical characteristics of the elderly was the most important consideration; a participant with the arthritical knee was limping at the kitchen entrance due to the difference of the floor level, and a user with a bent back was working on the floor or place an elbow on the worktable to support her body. Those results made a conclusion about the common problems of the kitchens, and suggested the check list which has to be considered when designing the elderly using kitchen.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.125-128
• /
• 2000

This paper presents an energy function which provides the direct relationships between the system stability and parameters of the exciter system. The energy function is derived from the energy conservation law by using the first motion integral. he time derivative does not absolutely satisfy the seminegativeness. However dE/dt usually has big negative value just after the fault clearing so that the energy is rapidly decreased. In this situation, the system state can be obviously confined in a stable region if the intial energy is less than the UEP energy. With these observation, two theorems are developed regarding the state confinement and asymptotic stability. Based on two theorems a new approximated direct energy method is developed to analyze the transient stability with the consideration of the exciter control effects. The proposed method has been tested for a single-machine-infinite bus system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.889-898
• /
• 2003

The soot yield is studied by a premixed propane-oxygen-inert gas combustion in a specially designed disk-type constant-volume combustion chamber to investigate the effect of turbulence on soot formation. Premixtures are simultaneously ignited by eight spark plugs located on the circumference of chamber at 45 degree intervals in order to observe the soot formation under high pressures and high temperatures. The eight flames converged compress the end gases to a high pressure. The laser schlieren and direct flame photographs for observation field with 10 mm in diameter are taken to examine into the behaviors of flame front and gas flow in laminar and turbulent combustion. The soot volume fraction in the chamber center during the final stage of combustion at the highest pressure is measured by the in situ laser extinction technique and simultaneously the corresponding burnt gas temperature by the two-color pyrometry method. It is found that the soot yield of turbulent combustion decreases in comparison with that of laminar combustion because the burnt gas temperature increases with the drop of heat loss.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.68-79
• /
• 1996

To investigate the efficiency of a fibrous collagen membrane(FCM) composed of bovine skin type I atelocollagen as a carrier for BMP, partially purified bovine BMP/FCM($0.3mg/10{\times}5{\times}1mm$) composites were implanted into the dorsal subcutaneous tissue of rats. FCM alone was also implanted as a control. The implants were harvested at 1, 2, 3, and 10 weeks after implantation, then prepared for routine light microscopic observation. The FCM alone did not induce osteogenesis and revealed no specific foreign body reaction nor was there any definite resorptive evidence for 10 weeks after implantation, while the BMP/FCM composites induced favorable bone formation in a process that resembled an endochondral and direct ossification mode. At 10 weeks, the well formed bone confined to embedded collagen fibers revealed hematopoietic marrow between bony trabeculae without evidence of resorptive or degenerative changes . These findings support the suggestion that BMP may induce undifferentiated mesenchymal cells into either chondroblasts or osteoblasts or both independantly according to the chemico- physical characteristics of the carrier, which develops the endochondral and/or direct bone formation process, and suggest that the FCM may be a favorable carrier for BMP.

• Journal of Distribution Science
• /
• v.10 no.9
• /
• pp.37-45
• /
• 2012

Purpose - The objective of the paper is to examine display techniques and tools at traditional clothing stores to improve the traditional market. Since most research has been done theoretical and model based approaches, changing business environments requires more holistic and detailed facts to apply or develop a retail business strategy. Research design / data / methodology - The study employs qualitative research such as direct observation as well as direct interview and telephone interview from May 7 to Jun 2, 2012. The paper examines lighting, various display techniques and tools. The analysis of 80 store pictures for them had been done three examiners with agreement. Results - Sample garments are displayed on the walls; the racks of hangers are attached on the upper part of the walls; there is indirect lighting only. Furthermore, the merchandises are displayed, without any consistency, on various sizes and shapes of hangers, only on the owners' arbitrariness. When considering that the Korean traditional fabrics (Juddan) have a little pattern and colors as their important elements for displaying. Conclusions - The findings of this study show that the retailers in the traditional market need to have lessons on colors and to learn how to use the specific lighting and to display merchandise.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.57-68
• /
• 1997

The purpose of this study was to understand the effects of religion on Amish costumes. For this study I twice visited Amish village in Lancaster Pennsylvania U.S,A in July 1993 and August 1996. The methods of study directed direct observation and literature re-search. The results of this study were as follows: The Amish was livid practically by strict princi- ples of simplicity diligence piety and mutual cooperation. The Amish behavioral code of laws known as ordnung dictated appropriate dress agricultual methods and a routine for daily life. The Amish costumes originated with the 17th century Puritans traditional apparel the European farmer and the clothing style of 19th century Americal,. Amish costumes was fastened with hooks and eyes instead of decorative buttons a diret influence of Puritanism does and did non con-tain ornamental outer pockets. This distinctively simple costumes served as a boundary outsiders to and as a direct ex-pression of their faith. An Amish doll had neither facial features nor fingers and toes as described in scripture "You do not become corrupt and make for yourselves an idol an image of any shape whether formed like a man or a women or like any animal on earth or any bird that flies in the air or like any creature that moves along the ground or any fish in the waters below" In this way Amish costumes was affected by their religion and faith.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.594-599
• /
• 2009

Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Apart from wind and solar, ocean holds tremendous amount of untapped energy in forms such as geothermal vents, tides and waves. The current study looks at generating power using waves and the focus is on the primary energy conversion (first stage conversion) of incoming waves for different models. Observation of flow characteristics and the velocity in the augmentation channel as well as the front guide nozzle are presented in the paper. A numerical wave tank was used to simulate the waves and after obtaining the desired wave properties; the augmentation channel plus the front guide nozzle and rear chamber were integrated to the numerical wave tank. The waves in the numerical wave tank were generated by a piston type wave maker which was located at the wave tank inlet. The inlet which was modeled as a plate wall moved sinusoidally with the general function, x=asin$\omega$t The augmentation channel consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. The analysis was performed using the commercial CFD code ANSYS-CFX.