• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1988.10a
• /
• pp.101-108
• /
• 1988

In this paper packet-swap Accptant Queveing system with synchronous single server and finite storage space is proposed for throughput improvement. Queueling systems are analyzed with Minisint Approximation reported by J.F CHANG and R.F Chang. Comparison between PSA. Queveing system and First-Come First Acceptant Queveing system via throughput and blocking probabilliy of test octet was performed The comparison showed that PAS Queweing system perfumes better than j.F ChANG’s Queveing system.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.451-451
• /
• 2012

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.47-50
• /
• 2008

A novel high channel efficiency transceiver based on a fast acquisition frequency synthesizer has been designed. The direct digital synthesis (DDS) technique is applied and a simple memory look-up table is incorporated to expedite channel acquisition. The technique simplifies the frequency control process in the transceiver and thus reduces the channel switching time. As a result, the channel efficiency is improved. The designed transceiver is ideal for frequency hopping mobile communication applications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.7-15
• /
• 2002

The digital DBS tuner is designed and implemented in a CMOS process using a direct-conversion architecture that offers a high degree of integration. To generate mathched LO I/Q quadrature signals covering the total input frequency range, a fully integrated ring oscillator is employed. And, to decrease a high level of phase noise of the ring oscillator, a frequency synthesizer is designed using a double loop strucure. This paper proposes and verifies a band selective loop for fast frequency switching time of the double loop frequency synthesizer. The down-conversion mixer with source follower input stages is used for low voltage operation. An experiment implementation of the frequency synthesizer and mixer with integrated a 0.25um CMOS process achieves a switching time of 600us when frequency changes from 950 to 2150MHz. And, the experiment results show a quadrature amplitude mismatch of max. 0.06dB and a quadrature phase mismathc of max. >$3.4^{\circ}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.914-924
• /
• 1991

It has been generally used for PLL(Phase Locked Loop) to be synthesized randomly chosen frequency state, but the PLL locking time was inevitable element. A direct digital synthesizer. Which makes output frequency directly in sine wave by a phase accumulating method, could be leiminate the defect, although a phase distortion in frequency spectrum. In order to improve this disadvantage, the phase accumulating method is reconsidered in the side of he output wave formula expression. A new mechanism is proposed, and it is constructed by a most suitable logic elements. The spectrum of synthesized sine waveform is simulated and compared with a measured value, and it’s the coherence frequency hoppong state with the PN(Pseudo Noise) code sequence is confirmed. In this results, the power levels of phase distortion harmonics are decreased to 10~25dB and bandwidths are increased to 420kHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.321-330
• /
• 2010

In this paper, the theoretical background and the specific implementation method of a compressive receiver for RFID signal detection as well as the design method of DDL(Dispersive Delay Line) and chirp LO are described. DDL, which is one of the main components of the compressive receiver, is designed to have $13{\mu}s$ dispersive delay time and 6 MHz bandwidth using the SAW technique based on $LiNbO_3$ material. The chirp LO is designed using DDS(Direct Digital Synthesizer). Also the compressive receiver is fabricated to be installed into the RFID reader. Test results show the maximum frequency error of 25 kHz for single signal input, the receiver sensitivity of -44 dBm, and the maximum frequency error is 75 kHz for 6 multi-tone input signals. These results indicate that the fabricated compressive receiver is working well even in dense RFID operating environments.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.41-51
• /
• 1997

In this study, two types of the direct digital frequency synthesizers (DDFS) designed and implemented using 1.0.mu.m CMOS gatearray(SOG) technolgoies are interoduced. To analize the effect of the number of phase bits(L), address data bits(A), and DAC bits (D) on the output spectrums of the DDFSs, the NCO-based BCD-DDFS composed of L=24, A=14, and D=8, and the improved binary-DDFS composed of L=24, A=8, and D=10 have been studied. The chips have been designed with and without a noise shapper to reduce spurious noises due to phase truncation and reduced sine ROM in output spectrum.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.8
• /
• pp.1-7
• /
• 1997

In tis paper, w eproposed a modeling for direct-sequence spread communication base band modem in RT-level VHDL and implemented in a one-chip VLSI and tested. The transmitter modulates with DQPSK modulation method and spreads a modulated signal with 32-bit PN code into 1.152MHz. The receiver de-spreads a signal using 32-tap matched filter and recovers with DQPSK demodulation method. The digital frequency synthesizer generates the sine signal and the cosine signal of 2.304MHz with ROM tables in the size of 7$\^$*/256 and 6$\^$*/256, respectively. The implemented VLSI has been verified a BER with 10$\^$-4/ at E$\_$b//N$\_$o/ of 13dB with a SPW fixed design model and fabricated in the 0.8.mu.m KG6423 gate array with a VHDL model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.3
• /
• pp.379-386
• /
• 2016

In this paper, phase noise analysis result for 2.4 GHz PLL(phase locked loop) using SPD(sample phase detector) is proposed. It can be used for high performance frequency synthesizer's LO(local oscillator) to extend output frequency range or for LO of offset PLL to reduce a division rate or for clock signal of DDS(direct digital synthesizer). Before manufacturing, theoretical estimation of PLL's phase noise performance should be performed. In order to calculate phase noise of PLL using SPD, Leeson model is used for modeling phase noise of VCO(voltage controlled oscillator) and OCXO(ovened crystal oscillator). After theoretically analyzing phase noise of PLL, optimized loop filter bandwidth was determined. And then, phase noise of designed loop filter was calculated to find suitable OP-Amp. Also, the calculated result of phase noise was compared with the measured one. The measured phase noise of PLL was -130 dBc/Hz @ 10 kHz.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1984-1987
• /
• 2002

This paper describes the design and implementation of a single-chip digitally synthesized 0-35MHz agile function generator. The chip comprises an integrated direct digital synthesizer (DDS) with a 10-bit on- chip digital-to-analog converter (DAC) using an n-well single-poly triple-metal 0.5-$\mu\textrm{m}$ CMOS technology. The main features of the chip include maximum clock frequency of 100 MHz at 3.3-V supply voltage, 32-bit frequency tuning word resolution, 12-bit phase tuning word resolution, and an on-chip 10-bit DAC. The chip provides sinusoidal, ramp, saw-tooth, and random waveforms with phase and frequency modulation, and power-down function. At 100-MHz clock frequency, the chip covers a bandwidth from dc to 35 MHz in 0.0233-Hz frequency steps with 190-ns frequency switching speed. The complete chip occupies 12-mm$^2$die area and dissipates 0.4 W at 100-MHz clock frequency.