• Title/Summary/Keyword: Direct Conversion

Search Result 638, Processing Time 0.026 seconds

Comparison Study of Water Tension and Content Characteristics in Differently Textured Soils under Automatic Drip Irrigation (자동점적관수에 의한 토성별 수분함량 및 장력 변화특성 비교 연구)

  • Kim, Hak-Jin;Ahn, Sung-Wuk;Han, Kyung-Hwa;Choi, Jin-Yong;Chung, Sun-Ok;Roh, Mi-Young;Hur, Seung-Oh
    • Journal of Bio-Environment Control
    • /
    • v.22 no.4
    • /
    • pp.341-348
    • /
    • 2013
  • Maintenance of adequate soil tension or content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil tension and content for precision irrigation would allow optimal soil water condition to crops and minimize the adverse effects of water stress on crop growth and development. This research reports on a comparison of soil water tension and content variations in differently textured soils over time under drip irrigation using two different water management methods, i.e. pulse time and required water irrigation methods. The pulse time-based irrigation was performed by turning the solenoid valve on and off for preset times to allow the wetting front to disperse in root zone before additional water was applied. The required water estimation method was a new water control logic designed by Rural Development Administration that applies the amount of water required based on a conversion of the measured water tension into water content. The use of the pulse time irrigation method under drip irrigation at a high tension of -20 kPa and high temperatures over $30^{\circ}C$ was not successful at maintaining moisture tensions within an appropriate range of 5 kPa because the preset irrigation times used for water control could not compensate for the change in evapotranspiration during day and night. The response time and pattern of water contents for all of the tested soils measured with capacitance-based sensor probes were faster and more direct than those of water tensions measured with porous and ceramic cup-based tensiometers when water was applied, indicating water content would be a better control variable for automatic irrigation. The required water estimation-based irrigation method provided relatively stable control of moisture tension, even though somewhat lower tension values were obtained as compared to the target tension of -20 kPa, indicating that growers could expect to be effective in controlling low tensions ranging from -10 to -20 kPa with the required water estimation system.

History of Land Registration and Small House Policies in the New Territories of the Hong Kong Special Administrative Region, the People's Republic of China

  • Fung, Philip Sing-Sang;Lee, Almond Sze-Mun
    • Land and Housing Review
    • /
    • v.5 no.1
    • /
    • pp.53-56
    • /
    • 2014
  • Hong Kong, a well-known metropolis characterized by skyscrapers on both sides of the Victoria Harbour, consists mainly of 3 parts, namely the Hong Kong Island, the Kowloon peninsula and the New Territories (N.T.) which is the land area north of Kowloon plus a number of outlying islands. Located in the N.T. are all the new towns, market towns; and in the plains and valleys lie scattered village houses of not more than 3 storeys within the confines of well-defined village. These village houses are governed by a rural housing policy that could be traced back to the very beginning of the former British administration in the N.T. By the Convention of Peking of 1898, the N.T., comprising the massive land area north of Kowloon up to Shenzhen River and 235 islands, was leased to Britain by China for 99 years from 1st July 1898. Soon after occupation, the colonial government conducted a survey of this uncharted territory from 1899 to 1903, and set up a land court to facilitate all land registration work and to resolve disputed claims. By 1905, the Block Crown Leases with Schedule of Lessees and details of the lots, each with a copy of the lot index plan (Demarcation Plan) were executed. Based on the above, Crown rent rolls were prepared for record and rent collection purposes. All grants of land thereafter are known as New Grant lots. After completion and execution of the Block Crown Lease in 1905, N.T. villagers had to purchase village house lots by means of Restricted Village Auctions; and Building Licences were issued to convert private agricultural land for building purposes but gradually replaced by Land Exchanges (i.e. to surrender agricultural land for the re-grant of building land) from the early 1960's until introduction of the current Small House Policy in October 1972. It was not until the current New Territories Small House Policy came into effect in December 1972 that the Land Authority can make direct grant of government land or approve the conversion of self-owned agricultural land to allow indigenous villagers to build houses within the village environs under concessionary terms. Such houses are currently restricted to 700 square feet in area and three storeys with a maximum height of 27 feet. An indigenous villager is a male descendent of a villager who was the resident of a recognized village already existing in 1898. Each villager is only allowed one concessionary grant in his lifetime. Upon return of Hong Kong to the People's Republic of China on July 1st, 1997, the traditional rights of indigenous villagers are protected under Article 40 of the Basic Law (a mini-constitution of the Hong Kong Special Administrative Region). Also all N.T. leases have been extended for 50 years up to 2047. Owing to the escalating demand and spiral landed property prices in recent years, abuse of the N.T. Small House Policy has been reported in some areas and is a concern in some quarters. The Hong Kong Institute of Land Administration attempts to study the history that leads to the current rural housing policy in the New Territories with particular emphasis on the small house policy, hoping that some light can be shed on the "way forward" for such a controversial policy.

A Study On Interrelationship Between Korean And Mongolian Costume Laying Emphasis On The Age Of Mongolia's Invasion Upon Corea (한국(韓國).몽고복식(蒙古服飾)의 상관성(相關性) 연구(硏究)(II) - 고려시대(高麗時代)의 몽고침략기(蒙古侵略期)를 중심(中心)으로 -)

  • Son, Kyung-Ja
    • Journal of the Korean Society of Costume
    • /
    • v.16
    • /
    • pp.15-42
    • /
    • 1991
  • A nation's culture isn't consisted by the characteristics of the nation only, but it is greatly affected by the geographical features and natural conditions, and it could be also dominated by the continual effect through mutual contact on economic exchange or social problem and political interests with neighboring countries. It is a well known fact that the contact of culture between Korea and Mongolia established under the special political situation that Corea was invaded by Won. But more basically, the Nomad including Mongolia had influenced upon neighboring countries, therefore, our country was also greatly influenced on consisting of our own culture by them. Moreover. the fact that our language belongs to their language's category(mostly Tweigru and Mongolian language) proves that the origin of our culture was deeply related with Mongolia. Accordingly, we could not limit the cultural relation between Korea and Mongolia within a special era. But especially, since unification of China by Mongolia, Won which appeared as a new great nation had dominated Corea for one hundred years, and the Corea's costume culture had a point of conversion to the mongolian. Therefore, this study expects to comment upon the relations of costume between Corea and Mongolia from a view point of Corea's tribute and royal gifts gifts by Mongolia written on the reference literatures. 1) From the ancient times, between our country and Mongolia there has been a direct or indirect exchange caused by the people's movement or invasion due to very closed neighboring. The relations between Corea and Mongolia have started from the mongolia's requests of tribute for the reason why they helped Corea against the Keoran's invasion, and these relation had continued by King Kongmin's age. 2) Mongolia had plundered a tribute such as dress, cereals, horses, military supplies, soldiers, maiden and little girls etc. from Corea, and therefore, a great confusion occurred on political, economic and social fields. And since King Chungyoul of Corea got married with a Princess of Won, the Corea's position was placed as the Buma nation(nation of son in law) and then high class people of Corea preferred to follow the mongolian costume such as Byunbal (pigtail), Ho dress (mongolian dress), Rouges, Chockturi (a kind of formal cap) and Doturak pigtail ribbon, and some have been applied up to date. On the other hand, the custom of Corea had transmitted to the Mongolian nobility, they called it "Corea Yang(style)". 3) The costume of Corea could be divided into three different periods, the first is the period influenced by Tang and Song's regime, the second is affected by the Won's costume and the third is applying the Myung's regime in the end of Corea. The Mongolian dress was based on the Ho dress form and it has been developed through compounding artistic traditional fields and foreign customs in long history. And Mongolia is composed of various tribes, therefore, they have their own dress for each tribe. Our country and Mongolia had a similar dress form based on Ho dress and both used the Chacksukunggo (jacket with small sleeves and slacks) and Seon(line). And the ornaments of costume such as Chockturi, Doturak pigtail ribbon and Rouges had transmitted and fixed down as a traditional wedding garment, but the Rouges has been used by noble women from the ancient times in our country. Since a member of the Society of Korean Costume has visited Mongolia in August 1990 for the first time, I really recognized the neccesity of more detailed study on the costume relation between Korea and Mongolia, and I will proceed with the study on various fields of costume under cooperation of Institute of Oriental Academy of Mongolia.

  • PDF

The Work and Job Satisfaction of Paramedics in the Emergency Room of University Hospitals (대학병원 응급실 내 1급 응급구조사의 업무와 직무만족도)

  • Lee, Ok-Hee
    • The Korean Journal of Emergency Medical Services
    • /
    • v.15 no.1
    • /
    • pp.47-63
    • /
    • 2011
  • Purpose : This research is to examine the work and job satisfaction of paramedics in the emergency room of university hospitals. This research is done to provide basic data needed for establishing work realms of paramedics in hospitals and to enhance their degree of satisfaction. Methods : Research questionnaire survey was conducted on 141 paramedics working in the emergency room of 32 university hospitals from August 24, 2010 to September 30, 2010 through direct visits and telephone interviews or email to explain the purpose of this research and assurance of confidentiality of responses on the questionnaires. As the tool for the degree of job satisfaction, 'The Index of Work Satisfaction' developed by Slavitt, et al(1978) and revised and supplemented by Soon-shim Kim and Hye-ran Kwon(2002) was used. The collected data were analyzed by evaluating frequency, percentage, mean, standard deviation, t-test and ANOVA, Cronbach's $\alpha$ by using SPSS WIN 18.0 program. Results : 1. Investigating the work and role of paramedics in the emergency room of university hospitals, electrocardiogram(EKG) was found to be highest with $\alpha$ was widely used with the rate of patient evaluation and test area. In the medical treatment for patients area, cardiopulmonary resuscitation(CPR) with 95%(134 persons) and ventilation assistance through ambu bagging(BVM) with 95%(134 persons) were found to be high. $\alpha$ were performed. In the role within the hospital and other areas, a member of CPR team in the hospital accounted for 78%(110 persons). 2. In the measurements of the job satisfaction of paramedics working at university hospitals, the total mean score was 2.91. The mean score in each question area indicated: section on job 3.48, autonomy 3.05, interaction 3.01, organizational demand 2.85, working conditions 2.67, salaries 2.40. This result obviously demonstrates the work of paramedics itself was most satisfied but the salaries were most dissatisfied. 3. In the measurements of the job satisfaction of paramedics working at university hospitals, job satisfaction based on the general characteristics showed significant difference in age (F=6.547, p=.002), gender (F=4.436, p=.000) marital status (F=-3.270, p= .001), religion (F=2.041, p= .043), motive for application (F=3.603, p= .015), and salary (F=6.658, p= .000). 대학병원 응급실 내 1급 응급구조사의 업무와 직무만족도 The Journal of the Korean Society of Emergency Medical Technology Vol. 15 (1) 63 4. In the measurements of the job satisfaction of paramedics working at university hospitals, job satisfaction based on the working environmental characteristics showed significant difference in total number of paramedics (F=3.779, p= .012), form of employment (F=5.601, p= .001), existence or non-existence of intention to change jobs (F=-4.037, p= .000). Conclusion : The work of paramedics in the emergency room of university hospitals consists of lots of treatment processes after specialized diagnosis and performance of professionally subdivided works. However, current legislation does not reflect such circumstances to which paramedics are exposed; thus, it should be considered for further revision and modification. The degree of job satisfaction of paramedics in the emergency room of university hospitals was high but low in salaries and working conditions were the weak points. The measures to enhance their degree of job satisfaction should be taken though improvement of labor conditions such as consideration of the rate of increase in salaries, compensation for overtime work, providing rest areas, improvement of current employment system, and conversion of temporary employees into regular employees.

Comparison of Electrical Signal Properties about Top Electrode Size on Photoconductor Film (광도전체 필름 상부 전극크기에 따른 전기적 신호 특성 비교)

  • Kang, Sang-Sik;Jung, Bong-Jae;Noh, Si-Cheul;Cho, Chang-Hoon;Yoon, Ju-Sun;Jeon, Sung-Pyo;Park, Ji-Koon
    • Journal of the Korean Society of Radiology
    • /
    • v.5 no.2
    • /
    • pp.93-96
    • /
    • 2011
  • Currently, the development of direct conversion radiation detector using photoconductor materials is progressing in widely. Among of theses photoconductor materials, mercuric iodide compound than amorphous selenium has excellent absorption and sensitivity of high energy radiation. Also, the detection efficiency of signal generated in photoconductor film varies by electric filed and geometric distribution according to top-bottom electrode size. Therefore, in this work, the x-ray detection characteristics are investigated about the size of top electrode in $HgI_2$ photoconductor film. For sample fabrication, to solve the problem that is difficult to make a large area film, we used the spatial paste screen-print method. And the sample thickness is $150{\mu}m$ and an film area size is $3cm{\times}3cm$ on ITO-coated glass substrate. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a magnetron sputtering system and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$. From experimental measurement, the dark current, sensitivity and SNR of the $HgI_2$ film are obtained from I-V test. From the experimental results, it shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high dark current. Therefore, the optimized size of electrode is importance for the development of photoconductor based x-ray imaging detector.

The Design and Fabrication of Conversion Layer for Application of Direct-Detection Type Flat Panel Detector (직접 검출형 평판 검출기 적용을 위한 변환층 설계 및 제작)

  • Noh, Si-Cheol;Kang, Sang-Sik;Jung, Bong-Jae;Choi, Il-Hong;Cho, Chang-Hoon;Heo, Ye-Ji;Yoon, Ju-Seon;Park, Ji-Koon
    • Journal of the Korean Society of Radiology
    • /
    • v.6 no.1
    • /
    • pp.73-77
    • /
    • 2012
  • Recently, Interest to the photoconductor, which is used to flat form X-ray detector such as a-Se, $HgI_2$, PbO, CdTe, $PbI_2$ etc. is increasing. In this study, the film layer by using the photoconductive material with particle sedimentation was fabricated and evaluated. The quantization efficiency of the continuous X-ray with the 70 kVp energy bandwidth was analyzed by using the Monte Carlo simulation. With the results, the thickness of film with 64 % quantization efficiency was 180 ${\mu}m$ which is similar to the efficiency of 500 ${\mu}m$ a-Se film. And $HIg_2$ film has the high quantization efficiency of 74 % on 240 ${\mu}m$ thickness. The electrical characteristics of the 239 ${\mu}m$ $Hgl_2$ films produced by particle sedimentation were shown as very low dark current(under 10 $pA/mm^2$), and high sensitivity(19.8 mC/mR-sec) with 1 $V/{\mu}m$ input voltage. The SNR, which is influence to the contrast of X-ray image, was shown highly as 3,125 in low driving voltage on 0.8 $V/{\mu}m$. With the results of this study, the development of the low-cost, high-performance image detector with film could be possible by replacing the film produced by particle sedimentation instead to a-Se detector.

A Study on the Decline of Provincial Government Office of Jeollabuk-do in Modern Era (근대기 전라북도 지방관아의 쇠퇴에 관한 연구)

  • Oh, Jun-young;Kim, Young-mo
    • Korean Journal of Heritage: History & Science
    • /
    • v.48 no.1
    • /
    • pp.24-43
    • /
    • 2015
  • This study constitutes an inquiry into the decline of Government Office(官衙) facilities carried out intensively during modern era, focusing on provincial government offices of Jeollabuk-do. There have been several studies of changes in provincial government offices till now, but there have been few studies of government offices of the counties and prefectures(郡縣) during the period of the Japanese Resident-General of Korea and after the National Liberation, temporally and there have still been lacking studies on Jeollabuk-do, spatially. Thus, this study attempts to empirically prove the reasons and the time of the decline of provincial government offices in Jeollabuk-do and the characteristics in the process of decline focusing on modern era. As a result of the study, four factors: demolition, abolition, appropriation and disaster had the most decisive impacts on the decline of government office facilities. Demolition refers to the destruction of government office facilities, and abolition, to the decline and the discontinuation of the operation of the facilities. Appropriation refers to conversion to facilities to meet public functions, and disaster, damage from a typhoon or fire. These factors had already been started from the 1900s, and by the 1930s, most of the government office facilities came to lose their original looks and functions. In the meantime, there was an essential purpose in demolition, the most direct factor in the destruction of the government office facilities in terms of function: that is new construction of public facilities necessary for administration and rule. The existing government office facilities were appropriated, sometimes, but behind that, many cases of demolition of the government office facilities for the new construction of public facilities are found. The appropriation of the government office facilities is divided into educational, administrative, financial and security facilities, and generally, Gaeksa(客舍) and Dongheon(東軒) were used respectively as educational and administrative facilities while their attached facilities were used as financial and public order and security facilities in general. Especially, some government office facilities were utilized as distinctive facilities such as housing or hospital. In the process of appropriation, a lot of modification occurred inside and outside the government office facilities, due to which, the government office facilities gradually declined losing their traditional styles.

A study on the introduction of organic waste-to-energy incentive system(I): Precise monitoring of biogasification (유기성폐자원에너지 인센티브제도 도입방안 연구(I): 바이오가스화 정밀모니터링)

  • Kwon, Jun-Hwa;Moon, Hee-Sung;Lee, Won-Seok;Lee, Dong-Jin
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.29 no.4
    • /
    • pp.67-76
    • /
    • 2021
  • Biogasification is a technology that produces environmentally friendly fuel using methane gas generated in the process of stably decomposing and processing organic waste. Biogasification is the most used method for energy conversion of organic waste with high moisture content, and is a useful method for organic waste treatment following the prohibition of direct landfill (2005) and marine dumping (2013). Due to African Swine Fever (ASF), which recently occurred in Korea, recycling of wet feed is prohibited, and consumers such as dry feed and compost are negatively recognized, making it difficult to treat food waste. Accordingly, biogasification is attracting more attention for the treatment and recycling of food waste. Korea's energy consumption amounted to 268.41 106toe, ranking 9th in the world. However, it is an energy-poor country that depends on foreign imports for about 95.8% of its energy supply. Therefore, in Korea, the Renewable Energy Portfolio Standard (RPS) is being introduced. The domestic RPS system sets the weight of the new and renewable energy certificate (REC, Renewable energy certificate) of waste energy lower than that of other renewable energy. Therefore, an additional incentive system is required for the activation of waste-to-energy. In this study, the operation of an anaerobic digester that treats food waste, food waste Leachate and various organic wastes was confirmed. It was intended to be used as basic data for preparing the waste-to-energy incentive system through precise monitoring for a certain period of time. Four sites that produce biogas from organic waste and use them for power generation and heavy gas were selected as target facilities, and field surveys and sampling were conducted. Basic properties analysis was performed on the influent sample of organic waste and the effluent sample according to the treatment process. As a result of the analysis of the properties, the total solids of the digester influent was an average of 12.11%, and the volatile solids of the total solids were confirmed to be 85.86%. BOD and CODcr removal rates were 60.8% and 64.8%. The volatile fatty acids in the influent averaged 55,716 mg/L. It can be confirmed that most of the volatile fatty acids were decomposed and removed with an average reduction rate of 92.3% after anaerobic digestion.