• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.123-135
• /
• 2012

As contents go digital and networks go broadband, there are a lot of changes made to Ad market caused by multimedia and multichannel environment. While platforms as the contents distribution window are increasing, the reality is that additional Ad revenue through platforms is concentrated on mammoth exclusive media because there are small number of the media that has control over platforms is able to create production and provide capital. In addition, as Media rep laws is passed at the Assembly plenary session, tipping effect in Ad market concentrated to some media. In this reality, pay TV market is expected to be within its direct orbit as it is predicted to produce new contents and distribution growth thanks to a wide variety of genres and experimental challenge. Thus, this study is to propose the methodology and an alternative for pay Ad market expansion. As the result of this research, an improvement scheme of indirect advertisement, virtual advertisement, and prohibited advertising item is suggested, and methodology for advertising market expansion is suggested through enterprise and government.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.9-17
• /
• 2015

The development of wireless communication technology and change in the ICT market has led to the development of the M2M service and technology. Under these circumstances, the M2M environment has been the focus of communication environment construction between machines without control or direct intervention of human being. With characteristics of wireless communication environment, the possibility of being exposed to numerous security threats and safe communication security technology have becoming an issue an important requirements for problems such as data exposure, forgery, modulation, deletion, and privacy. This research analyzes requirements of trapdoor collision hash, generates keys between groups under the M2M environment by using the specificity of trapdoor, and suggests technology to exchange keys with session keys. Further, it also suggests techniques to confirm authentication of device and gateway in accordance with group key generation. The techniques herein suggested are confirmed as safe methods in that they have attack resistance such as Masquerade Attack, Man-in-the-Middle Attack, and Replay Attack in the group communication block by using the speciality of collision message and collision hash.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.101-108
• /
• 2013

In this paper, we propose a method in which the negative acknowledge (NACK) message is used as command for cooperation and spectrum sharing. This allows for an automatic request for cooperation and sharing when the direct link of the primary user is in outage, and also allows for saving the number of control messages in cooperation-spectrum sharing based paradigm. In the sharing phase, the selected relay shares a power fraction of $1-{\alpha}$ for secondary transmitted signal while the remaining of ${\alpha}$ is for primary retransmitted signal. In the case of no relay collected, primary transmitter uses NACK as a command to retransmit the signal with fully power fraction (${\alpha}=1$). Both systems are assumed to employ BPSK signals. In this scheme, we propose the joint optimal decoding in the secondary user. The frame error rate (FER) performance at both systems is then analyzed. The theoretical and simulation results validate the analysis and confirm the efficiency of the protocol.

• Convergence Security Journal
• /
• v.16 no.3_2
• /
• pp.33-42
• /
• 2016

While evolving information-oriented society provides a lot of benefits to the human life, new types of threats have been increasing. Particularly, cyber terrorism, happen on the network that is composed of a computer system and information communication network, and the mean and scale of damage has reached a serious level. In other words, it is hard to locate cyber terror since it occurs in the virtual space, not in the real world, so identifying "Who is attacking?" (Non-visibility, non-formulas), or "Where the attack takes place?" (trans-nation) are hard. Hackers, individuals or even a small group of people, who carried out the cyber terror are posing new threats that could intimidate national security and the pace and magnitude of threats keep evolving. Scale and capability of North Korea's cyber terrorism are assessed as world-class level. Recently, North Korea is focusing on strengthen their cyber terrorism force. So improving a response system for cyber terror is a key necessity as North Korea's has emerged as a direct threat to South Korean security. Therefore, Korea has to redeem both legal and institutional systems immediately to perform as a unified control tower for preemptive response to cyber terrors arise from North Korea and neighboring countries.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.47-59
• /
• 2009

Due to the application-specific nature of wireless sensor networks, the sensitivity to such a requirement as data reporting latency may vary depending on the type of applications, thus requiring application-specific algorithm and protocol design paradigms which help us to maximize energy conservation and thus the network lifetime. In this paper, we propose a novel delay-adaptive sensor scheduling scheme for energy-saving data gathering which is based on a two phase clustering (TPC). The ultimate goal is to extend the network lifetime by providing sensors with high adaptability to the application-dependent and time-varying delay requirements. The TPC requests sensors to construct two types of links: direct and relay links. The direct links are used for control and forwarding time critical sensed data. On the other hand, the relay links are used only for data forwarding based on the user delay constraints, thus allowing the sensors to opportunistically use the most energy-saving links and forming a multi-hop path. Simulation results demonstrate that cluster-based delay-adaptive data gathering strategy (CD-DGS) saves a significant amount of energy for dense sensor networks by adapting to the user delay constraints.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.58-67
• /
• 2009

This paper presents a fully digital gain control system with a new high bandwidth and wide dynamic range power detector for DVB-S2 application. Because the peak-to-average power ratio (PAPR) of DVB-S2 system is so high and the settling time requirement is so stringent, the conventional closed-loop analog gain control scheme cannot be used. The digital gain control is necessary for the robust gain control and the direct digital interface with the baseband modem. Also, it has several advantages over the analog gain control in terms of the settling time and insensitivity to the process, voltage and temperature variation. In order to have a wide gain range with fine step resolution, a new AGC system is proposed. The system is composed of high-bandwidth digital VGAs, wide dynamic range power detectors with RMS detector, low power SAR type ADC, and a digital gain controller. To reduce the power consumption and chip area, only one SAR type ADC is used, and its input is time-interleaved based on four power detectors. Simulation and measurement results show that the new AGC system converges with gain error less than 0.25 dB to the desired level within $10{\mu}s$. It is implemented in a $0.18{\mu}m$ CMOS process. The measurement results of the proposed IF AGC system exhibit 80-dB gain range with 0.25-dB resolution, 8 nV/$\sqrt{Hz}$ input referred noise, and 5-dBm $IIP_3$ at 60-mW power consumption. The power detector shows the 35dB dynamic range for 100 MHz input.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.3
• /
• pp.57-64
• /
• 2020

Construction management performs a variety of tasks, and the buildup of the WBS and OBS is one of the core tasks. However, the practical utilization of WBS and OBS is low in the current construction management work. In this study, we conducted a survey of related experts to analyze the understanding, utilization level, application effect, and connectivity of WBS and OBS. As a result, it was identify that the standardization and linkage of WBS and OBS should be secured so that the construction manager (CMr) could apply it. Therefore, we extracted management control factors through expert in-depth interviews and workshops and conducted AHP importance analysis. Analysis results of importance shows that there is a high importance of strengthening the link between WBS and OBS and updating OBS due to changes in WBS. The results presented are not direct solutions, but are expected to provide a standard for construction managers to consider.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.729-741
• /
• 2012

Among the methods of precipitation data acquisition, a rain gauge station has a distinctive advantage of direct measurement of rainfall itself, but multiple stations should be installed in order to obtain areal precipitation data required for hydrological analysis. On the other hand, a rainfall radar may provide areal distribution of rainfall in real time though it is an indirect measurement of radar echoes on rain drops. Rainfall radars have been shown useful especially for forecasting short-term localized torrential storms that may cause catastrophic flash floods. CAPPI (Constant Altitude Plan Position Indicator), which is one of the several types of radar rainfall image data, has been provided on the Internet in real time by Korea Meteorological Administration (KMA). It is one of the most widely available rainfall data in Korea with fairly high level of confidence as it is produced with bias adjustment and quality control procedures by KMA. The objective of this study is to develop an improved way to extract quantitative rainfall data applicable to even very small watersheds from CAPPI using CIVCOM, which is a new image processing method based on a vector-based scheme proposed in this study rather than raster-based schemes proposed by other researchers. This study shows usefulness of CIVCOM through comparison of rainfall data produced by image processing methods including traditional raster-based schemes and a newly proposed vector-based one.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2377-2398
• /
• 2021

In the recent modernized world, utilization of natural resources (renewable & non-renewable) is increasing drastically due to the sophisticated life style of the people. The over-consumption of non-renewable resources causes pollution which leads to global warming. Consequently, government agencies have been taking several initiatives to control the over-consumption of non-renewable natural resources and encourage the production of renewable energy resources. In this regard, we introduce an IoT powered integrated framework called as green home architecture (GHA) for green score calculation based on the usage of natural resources for household purpose. Green score is a credit point (i.e.,10 pts) of a family which can be calculated once in a month based on the utilization of energy, production of renewable energy and pollution caused. The green score can be improved by reducing the consumption of energy, generation of renewable energy and preventing the pollution. The main objective of GHA is to monitor the day-to-day usage of resources and calculate the green score using the proposed green score algorithm. This algorithm gives positive credits for economic consumption of resources and production of renewable energy and also it gives negative credits for pollution caused. Here, we recommend a green score based tax calculation system which gives tax exemption based on the green score value. This direct beneficiary model will appreciate and encourage the citizens to consume fewer natural resources and prevent pollution. Rather than simply giving subsidy, this proposed system allows monitoring the subsidy scheme periodically and encourages the proper working system with tax exemption rewards. Also, our GHA will be used to monitor all the household appliances, vehicles, wind mills, electricity meter, water re-treatment plant, pollution level to read the consumption/production in appropriate units by using the suitable sensors. These values will be stored in mass storage platform like cloud for the calculation of green score and also employed for billing purpose by the government agencies. This integrated platform can replace the manual billing and directly benefits the government.