• 한국산업보건학회지
• /
• 제28권2호
• /
• pp.200-210
• /
• 2018

Objectives: The purpose of this study is to assess the exposure to ozone and total volatile organic compounds(TVOCs) generated during welding work at a shipyard and recommend respiratory protective equipment(RPE) adequate against these hazards. Method: Ozone was collected for about 30 minutes at two-minutes intervals using a direct reading instrument, specifically an ozone analyzer(Serinus 10, Ecotech, Australia). TVOCs were collected for about 30 minutes at three-minute intervals using a portable GC (Alpha 115, Synspec BV, the Netherlands), and were determined simultaneously by area sampling at the welding plume closest to the welder's breathing zone. The total measurements were 162 for ozone($CO_2$ welding 47, TIG 60, stick 55), and 136 for TVOCs($CO_2$ 65, TIG 50, stick 21). Based on these measurements, a literature survey was conducted to assess the adequacy of RPE. Results: Relative to Korean OEL, measurements above STEL 0.2 ppm were 23.4% for $CO_2$, 63.3% for TIG and 14.5% for stick welding. There were significant differences(p=<0.0001) among welding types. Compared with ACGIH peak exposure of 0.4 ppm for ozone, which is not applied in Korea, $CO_2$ welding exceeded it by 10.6%, TIG by 40.0% and stick by 7.3%. Although it was not feasible to compare them directly since there are no Korean OEL, TVOCs had very high levels similar to the concentrations before moving into a new apartment and about 10-20 times the indoor air quality recommendations for some individual measurements. Conclusions: As ozone removal RPE has been recommended in welding environments for a long time(Lunau, 1967), this fact was demonstrated based on the results of the on-site work environment measurements(ozone and TVOCs). In conclusion, for all welding at a shipyard, gas/vapor and particulate combination RPE are recommended. If this is not possible, it should at least be present for TIG welding.

• 한국가축번식학회지
• /
• 제25권4호
• /
• pp.381-388
• /
• 2001

본 연구는 돼지에서 성장호르몬과 결합되는 부위에 변이를 유도하여 결합력이 향상된 성장호르몬 결합단백질을 획득하기 위하여 수행되었다. 돼지의 지방으로부터 얻은 성장호르몬 수용체 RNA 내 성장호르몬 결합단백질 부분을 756 bp의 cDNA로 전향하고 클로닝한 후 site-directed mutagenesis 방법을 이용하여 26과 122번째 아미노산을 변이시켰다. 26번째 아미노산은 성장 호르몬과의 결합에 관련이 있다고 알려져 있는 돼지 성장호르몬 수용체 외막에 존재하는 다섯 군데의 N-linked glycosylation 부위와 가까이 위치한 부분이고, 122번째 아미노산은 소에서의 결합부위로 알려져 있다. 이렇게 변이를 유도한 성장호르몬 결합 단백질을 pET-32(c) 발현벡터에 삽입시키고 과발현시켰고 이를 정제하여 30 kDa의 변이를 유도한 성장호르몬 결합 단백질을 얻었다. 이러한 방법으로 성장호르몬 결합 단백질을 성장기에 있는 세포나 동물에 주입한다면 보다 향상된 성장을 볼 수 있을 것으로 사료된다.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.24-32
• /
• 2009

The purpose of this study is to understand characteristic of expression in Korean style fashion design and investigated Korean style fashion design's deployment and design idea method as well as its esthetic value. The photographs for the research were selected from fashion collections during S/S 2003-F/W 2007 by four specialists in the department of textile and then analyzed with 288 final data. The results were as followings. First, the characteristics of design expression in Korean style fashion design were formation by separating partial shape from the whole, formation by shape's separation and repetition, and connecting formation by combination and transformation of parts. In the case of color, they were direct expression, contrasting formative expression, and gradual changing expression. In the case of pattern, they were the methods of filling, filling & emptying, and partial filling. Second, the deployments of Korean style fashion design were adding modern elements to traditional things, combining traditional elements and modern things, and adding traditional elements to modern things. The third, Korean style fashion design's idea methods were weaving, snatching, adding, and changing. Fourth, it was shown that esthetic values of Korean style fashion design were the interactive organism by building organic relationship, the optimum expressing beauty with minimum elements, the palpitation having dynamics and rhythmical beauty.

• Tribology and Lubricants
• /
• 제31권2호
• /
• pp.35-41
• /
• 2015

A water-pump located in the cooling area of a car circulates cooling water. A particular bearing element, known as a water-pump bearing, installed in the rotating part carries the entire load. The failure of this water-pump bearing has a direct impact on the failure of the automobile engine, and so securing its reliability is crucial. Several researchers have examined the design principles of the water-pump bearing, but there are no reports on the life characteristic of the bearing yet. Herein, we report the construction of test equipment to reproduce the spalling of the roller contact, which is the main failure mode of the chosen water-pump bearing. We chose the radial load as an accelerated stress factor and validated the failure mode by monitoring the surface defects. We conducted the accelerated life test after determining the accelerated stress level through a combination of finite element analysis and a preliminary test. In the life tests, we used an accelerometer to perform failure diagnosis. In the last stage of this study, we present a statistical reliability analysis. Thus, we fully estimated the shape parameter of the water-pump bearing, accelerating level on the load , and the lifetime (MTTF and B₁₀ life) under real use conditions, and finally proposed an interval estimation value considering the uncertainty of the estimated value.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.565-574
• /
• 2019

Fischer-Tropsch 합성공정은 합성가스로부터 탄화수소를 합성하는 대표적인 방법이며, 주로 철(Fe)계와 코발트(Co)계 촉매로 알려져 있다. 현재 생성물에 따라 일부 기술(CTL, GTL 등)은 상용 규모로 운전되고 있으나, 경질탄화수소와 중간유분을 직접 생산하는 연구는 아직 상용화되지는 않았다. 그러므로, 본 연구에서는 국내에서 현재까지 경질탄화수소와 중간유분을 직접 생산하기 위한 연구들을 정리하였으며, 촉매의 제조법, 조촉매 첨가, 제올라이트의 조합과 같은 영향이 생성물의 선택도에 미치는 영향을 고찰하였다.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2241-2255
• /
• 2018

RSM methodology was applied to present mathematical models for the fabrication of polyvinylidene fluoride (PVDF) dual-layer hollow fibers in membrane distillation process. The design of experiments was used to investigate three main parameters in terms of polymer concentration in both outer and inner layers and the flow rate of dope solutions by the Box-Behnken method. According to obtained results, the optimization was done to present the proper membrane with desirable properties. The characteristics of the optimized membrane (named HF-O) suggested by the Box-Behnken (at the predicted point) showed that the proposed models are strongly valid. Then, a morphology study was done to modify the fiber by a combination of three types of a structure such as macro-void, sponge-like and sharp finger-like. It also improved the hydrophobicity of outer surface from 87 to $113^{\circ}$ and the mean pore size of the inner surface from 108.12 to 560.14 nm. The DCMD flux of modified fiber (named HF-M) enhanced 62% more than HF-O when it was fabricated by considering both of RSM and morphology study results. Finally, HF-M was conducted for long-term desalination process up to 100 hr and showed stable flux and wetting resistance during the test. These stepwise approaches are proposed to easily predict the main properties of PVDF dual-layer hollow fibers by valid models and to effectively modify its structure.

• 융합정보논문지
• /
• 제12권4호
• /
• pp.9-13
• /
• 2022

본 논문에서는 지면반사를 이용한 크로스아이 재밍에 의해서 발생되는 모노펄스 레이다의 추적오차를 분석한다. 크로스아이 재밍은 위상과 진폭이 다른 두 신호를 동시에 레이다로 송신하여 레이다 추적 시스템에 오차를 발생시키는 방법이다. 모노펄스 레이다가 지형 바운스에 의해서 발생되는 크로스 아이 재밍신호를 수신하면 고각 방향으로 추적오차가 발생 한다. 다중반사가 존재하는 저고도 환경에서 추적 레이다 수신기에서는 재머에서 송신된 신호가 직접 경로와 반사 경로 두 신호가 도달하여 그 경로 차에 의해 오차가 발생한다. 지형 바운스 재밍은 단일 재머를 이용하여 할 수 있는 장점이 있으나 재밍에 영향을 미치는 공간은 지형 반사각과 지형의 산란 정도에 의해서 제한된다. 본 연구는 해상에서 저고도로 날아오는 미사일이나 항공기로부터 함정을 보호하기 위해서 유용하게 활용될 수 있을 것으로 판단된다.

• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.530-537
• /
• 2011

연구는 SHCC의 건축시공 현장적용을 목적으로 현장 제조설비인 배치플랜트 2-Shaft 믹서를 이용하여 SHCC 제조 및 타설을 통해 실부재 실험을 실시하고, 이를 실내실험 결과와 비교 검토함으로서 향후 SHCC의 현장적용을 위한 기초자료로 제시하고자 하였다. 그 결과, 실내 Omni 믹서와 2-Shaft 믹서에서 SHCC 제조시 인장강도는 유사하였지만, 변형률에서 Omni 믹서가 2.5 % 이상 우수하였다. 배치플랜트 3500 L 2-Shaft 믹서에서 제조된 SHCC의 경우, 실내 100 L 2-Shaft 믹서에서 제조한 SHCC에서 인장 성능이 보다 높게 나타났다. SHCC의 현장적용 확대를 위해서는 배치플랜트 현장 제조시 건비빔, 모르타르 비빔시간을 충분히하여 매트릭스를 균질성을 확보하고, 비빔단계에서 적절한 점성 및 유동성을 확보할 수 있는 다양한 방법을 고려해야 한다.

• Journal of Veterinary Science
• /
• 제23권4호
• /
• pp.55.1-55.12
• /
• 2022

Background: ASF was first reported in Kenya in 1910 in 1921. In China, ASF spread to 31 provinces including Henan and Jiangsu within six months after it was first reported on August 3, 2018. The epidemic almost affected the whole China, causing direct economic losses of tens of billions of yuan. Cause great loss to our pig industry. As ELISA is cheap and easy to operate, OIE regards it as the preferred serological method for ASF detection. P54 protein has good antigenicity and is an ideal antigen for detection. Objective: To identify a conservative site in the African swine fever virus (ASFV) p54 protein and perform a Cloth-enzyme-linked immunosorbent assay (ELISA) for detecting the ASFV antibody in order to reduce risks posed by using the live virus in diagnostic assays. Method: We used bioinformatics methods to predict the antigen epitope of the ASFV p54 protein in combination with the antigenic index and artificially synthesized the predicted antigen epitope peptides. Using ASFV-positive serum and specific monoclonal antibodies (mAbs), we performed indirect ELISA and blocking ELISA to verify the immunological properties of the predicted epitope polypeptide. Results: The results of our prediction revealed that the possible antigen epitope regions were A23-29, A36-45, A72-94, A114-120, A124-130, and A137-150. The indirect ELISA showed that the peptides A23-29, A36-45, A72-94, A114-120, and A137-150 have good antigenicity. Moreover, the A36-45 polypeptide can react specifically with the mAb secreted by hybridoma cells, and its binding site contains a minimum number of essential amino acids in the sequence 37DIQFINPY44. Conclusions: Our study confirmed a conservative antigenic site in the ASFV p54 protein and its amino acid sequence. A competitive ELISA method for detecting ASFV antibodies was established based on recombinant p54 and matching mAb. Moreover, testing the protein sequence alignment verified that the method can theoretically detect antibodies produced by pigs affected by nearly all ASFVs worldwide.

• Radiation Oncology Journal
• /
• 제23권1호
• /
• pp.51-60
• /
• 2005

목적 : 분자 표적의 선택적 억제가 방사선 세포 살상 효과를 증진시키는 것으로 알려져 있으므로 선택적 COX-2 억제제와 EGF 수용체 차단제를 HeLa 세포주에 처리한 후 방사선 효과의 상승작용을 알아보고자 하였다. 대상 및 방법 : 자궁경부암 세포주인 HeLa세포에서 EGF 수용체 차단제 AG 1478, 선택적 COX-2 억제제 NS 398과 방사선을 복합 투여하여 세포성장 억제 분석(cell graph inhibition assay)과 세포사멸 분석(apoptosis assay)을 시행하였고, 방사선 감수성 변화를 살펴보기 위해 세포생존 분석(clonogenic survival assay)을 시행하였다. 방사선 감수성 인자로는 2 Gy에서의 세포생존분획($SF_2$)과 linear-quadratic model을 이용한 dose enhancement ratio (DER)를 사용하였다. 방사선 감수성에 대한 작용기전 분석을 위해 flow cytometry로 세포주기 분석(cell cycle analysls)을 시행하였고, western blot 분석을 통하여 bcl-2와 bax 단백질의 발현 변화를 살펴보았다. 결과 : HeLa세포에 NS 398과 AG 1478을 방사선과 함께 복합 투여한 실험 군에서 세포사멸 정도가 가장 높게 나타났다($8.49\%$ vs. $22.70\%$). 세포주기 분석 결과, 방사선과 복합 약물 처리군에서 $G_0/G_l$ 세포주기 정체와 5 세포 분획 소실이 나타났으며 이러한 변화는 72시간 이후까지 지속되었다 세포생존 분석 결과로는 방사선과 AG 1478군에서 $SF_{2}0.68{\pm}0.07$, DER 1.12를 보인 반면, 방사선과 복합약물처리군에서는 $SF_{2}0.12{\pm}0.01,\;DER\;3.00$으로 나타났다. Western blot분석에서는 방사선과 복합약물처리군에서 bcl-2와 bax 단백질 발현이 모두 감소하는 양상을 보였다. 결론 : 신호전달 체계를 억제하는 분자 표적 약제인 선택적 COX-2 억제제와 EGF 수용체 차단제를 방사선과 복합투여함으로써 HeLa세포의 방사선 감수성이 증가됨을 확인하였다.