• Geophysics and Geophysical Exploration
• /
• v.1 no.2
• /
• pp.110-115
• /
• 1998

Self-potential, VLF-EM and dipole-dipole resistivity methods have been widely used for exploration of conductive sulfide ore deposit, because of the convenience and low cost of field work and the reliability of their results. The geophysical responses for vein-type sulfide outcrop of Changkoom mine located in Bukwi-Myon, Jinan-Gun, Chollabuk-Do were investigated and compared with its drilling results. The geology around the survey area is composed of acidic volcanics and sediments of Yuchon Group. And sulfides bearing pyrite, pyrrotite, galena etc. are deposited in disseminated or vein type within acidic volcanics. Typical geophysical responses were detected from the above vein type ore body, respectively. From the shape and extent of S.P. anomaly, ore body is dipping westward and extending about 50 m. It is detected that the VLF EM response matching the outline of ore zone is considered as indication of dyke dipping westward. And also resistivity response indicating conductive dipping dyke is detected. From drilling results for outcrop and geophysical anomalies, the shape of ore body is vein type dipping about $70^{\circ}W$ and extending about 50 m.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.422-426
• /
• 2008

Hemodialysis graft coated with paclitaxel prevents stenosis; however, large initial burst release of paclitaxel causes many negative effects such as drug toxicity and inefficient drug loss. Therefore we developed and tested a novel coating method, double dipping, to provide controlled and sustained release of paclitaxel locally. Expanded polytetrafluoroethylene (ePTFE) grafts were dipped twice into a solution of several different paclitaxel concentrations. In vitro release tests of the double dipping method showed that early burst release could be somewhat retarded and followed by sustained release for a long time. We observed the effect of paclitaxel coating by double dipping in porcine model of arterio-venous (AV) grafts between the common carotid artery and the external jugular vein. 12 weeks after constructing AV grafts, cross sections of the graft venous anastomosis were obtained and analyzed. Paclitaxel coated ePTFE grafts by double dipping were observed to prevent neointimal hyperplasia and therefore reduced stenosis of the arteriovenous hemodialysis grafts, especially at the graft venous anastomosis sites. Our results demonstrate that second dipping of ePTFE graft, which was already coated once with paclitaxel, washes off the drug on a surface of the graft and affects the ratio of paclitaxel on the surface to that of the inner space, possibly by diffusion: thus the early burst of drug can be somewhat reduced.

• Korean journal of applied entomology
• /
• v.31 no.4
• /
• pp.452-460
• /
• 1992

To establish the economical and reliable routine bioassay system for developing new insecticidal compounds, effects of leaf-dipping time, application methods, insect species and their developmental stages on susceptibilities of insects to insecticides were studied. The stable insecticidal activity appeared at the dipping time for 30-60 seconds in leaf-dipping method, and the most effective application methods were leaf-dipping method for apterous green peach aphid adults, and third instars of diamond-back moth and tobacco cutworm, whereas seedling+insect spray method for adults or third instars of brown planthoppers. For two-spotted spider mite, leaf-dipping or intact plant spray method was favorable. In the bioassay for chitin synthesis inhibitors, the inoculation of third instars of brown planthopper, diamond-back moth, tobacco cutworm and green peach aphid, and larvae of two-spotted spider mite to the young host plants treated by spray method were adequate bioassay methods.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.71.1-71.1
• /
• 2000

• The Plant Pathology Journal
• /
• v.23 no.2
• /
• pp.109-112
• /
• 2007

This study was to examine the efficacy of a root-dipping application of antagonistic bacterial strains for the control of Phytophthora blight of pepper caused by P. capcisi, and to evaluate their plant growth-promoting effects in the field in 2005 and 2006. The candidate antagonistic rhizobacterial strains CCR04, CCR80, GSE09, ISE13, and ISE14 were treated by dipping plant roots with bacterial suspensions prior to transplanting. The candidate rhizobacterial strains CCR04, CCR80, GSE09, and ISE14 significantly (P=0.05) reduced the disease incidence and the area under the disease progress curves when compared to buffer-treated controls in at least a year test. The metalaxy l(fungicide-treated control) resulted in one of the lowest disease incidences among the treatments in both years. Moreover, the strains CCR04, CCR80, GSE09, and ISE13 significantly (P=0.05) increased the fruit weights and/or numbers of peppers in at least a year test compared to the buffer-treated controls. These results suggest that the antagonistic rhizobacterial strains CCR04, CCR80, and GSE09 could be efficient biocontrol agents by controlling Phytophthora blight of pepper and promoting the plant growth when treated with root-dipping at transplanting.

• Journal of the Korean Ceramic Society
• /
• v.29 no.2
• /
• pp.107-118
• /
• 1992

Alumina supports for TiO2 ultrafiltration membrane coating were prepared by presintering disk-type preforms at 140$0^{\circ}C$. These supports showed uniform microstructures which had the apparent porosity of 40%, the pore size distribution in the range of 0.1~0.5${\mu}{\textrm}{m}$, and the water flux of 1400ι/$m^2$.h at the pressure difference of 10 atm. The optimum pH and concentration of the TiO2 sol for coating were 0.8 and 1.0 wt%, respectively, and sol particles were identified as rutile forms of 20 nm size. Crack-free alumina-supported rutile TiO2 membranes could be prepared through well controlled drying and heating the gel layer coated by the sol-gel dipping. The pore size of the TiO2 membranes heat-treated at 50$0^{\circ}C$ for 2 hrs was 30~80$\AA$, and their thickness varied from 1.1 to 3.8 ${\mu}{\textrm}{m}$ in accordence with the dipping time (4~40 min). The flux of water through this composite membrane at 10 atm was found to be in the range from 800 to 1100ι/$m^2$.hr depending on the dipping time (10~40 min). The membrane thickness increased linearly with the square root of the dipping time and the slope was 0.62 ${\mu}{\textrm}{m}$/{{{{ SQRT { min} }}.

• Korean journal of food and cookery science
• /
• v.19 no.5
• /
• pp.659-666
• /
• 2003

The purpose of this study was to standardize the various methods and recipes of Hwajeun (glutinous rice pancake with flower) that appeare in the literature. For this purpose, the effects on sensory and physical characteristics of Hwajeun in various kinds of dipping syrups (S1 : honey, S2 : rice syrup, S3 : com syrup, S4 : sugar syrup and S5 : sugar) during storage for 24hrs were investigated. This experiment consisted of the measurement of water content, color difference meter, texture analyser and sensory evaluation for acceptance (color, flavor, moistness, softness, chewiness, adhesiveness, sweetness and overall acceptability). The moisture contents decreased with increasing storage time, indicating that S1 had a significantly (p<0.01) high value until 12hrs. The colorimetric values of lightness (L), redness (a) and yellowness (b) decreased and the total color difference values ($\Delta$E) increased with increasing storage time. In the two bite compression test, the hardness of S1 and S3 showed significantly (p<0.0001) lower values than other samples. As a result of the sensory evaluation for Hwajeun prepared with various kinds of dipping syrup, S1 and S3 were most preferred in color, flavor, moistness, chewiness, adhesiveness, sweetness and overall acceptability of sensory evaluation.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.529-533
• /
• 2006

To produce fresh-cut fruit products of high quality, the combined effects of postharvest calcium and heat treatment on Tsugaru apple were examined. Whole fruits were treated for 20 min at three different conditions: dipping in 3% $CaCl_2$ solution at $45^{\circ}C$ or ambient temperature, or in heated water at $45^{\circ}C$. The calcium content of the apples dipped in $CaCl_2$ solution at $45^{\circ}C$ was higher than that of the control and the non-heated calcium dipping. The fruits with calcium and heat treatment showed the same pattern of respiration rates as the control did during storage. The browning degree of the apple slices increased to approximately 3% after one-day storage, but no significant difference was observed between the treated and untreated apples. The fruits with $CaCl_2$ solution dipping at $45^{\circ}C$ had higher firmness than those with calcium dipping or heat treatment alone.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.541-548
• /
• 2020

To overcome the disadvantage of hull mounted sonar, many countries operate dipping sonar system for helicopter. Although limited in performance, this system has the advantage of ensuring the survivability of the surface ship and improving the detection performance by adjusting the depth according to the ocean environment. In this paper, a method to calculate the optimal depth of the dipping sonar for helicopters is proposed by applying an optimization algorithm. In addition, in order to evaluate the performance of the sonar, the Sonar Performance Function (SPF) is defined to consider the ocean environment, the depth of the target and the depth of the dipping sonar. In order to reduce the calculation time, the optimal depth is calculated by applying Simulated Annealing (SA), one of the optimization algorithms. For the verification of accuracy, the optimal depth calculated by applying the optimization technique is compared with the calculation of the SPF. This paper also provides the results of calculation of optimal depth for ocean environment in the East sea.

• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.185-192
• /
• 2013

Purpose: The aim of this study was to compare with color reproducibility of the coating method and dipping method using a colour liquid. Methods: Two groups of square-shaped specimens ($10mm{\times}10mm$ in diameter, 1.5mm thickness) were prepared for analysis(n=15/group). The CM(Coating Method) group was fabricated as full zirconia specimens with the coating coloring method and Group DM(Dipping Method) was prepared as specimens of 0.7 mm-thick zirconia plate using the dipping coloring method and veneered with 0.8mm-thick porcelain. Color parameters were measured with ShadeEye $NCC^{(R)}$ spectrophotometer and color differences were calculated using the equation ${\Delta}E^*= \{({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2\}^{1/2}$. Non-parametric statistical methods, the Mann-Whitney test, and the Kruskal-Wallis test were used to analyze the data. Type one error rate was set at 0.05. Results: Color difference values larger than 7 were observed between specimens with the coating method and the dipping method, which were detectable difference in a clinical setting. Conclusion: Cautious application of the coating coloring method in a clinical setting and further researches to standardize the coating method are needed.