• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.834-838
• /
• 2004

This paper presents the structure of a dimming control system for multiple fluorescent lamps. The dimming control system is composed of a phase angle controller, a transducer, and dimmable ballasts. In these ballasts, dimming control is achieved by varying the switching frequency that is controlled by the external DC level.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.97-100
• /
• 2008

The daylight responsive dimming system is an energy saving system that automatically controls lighting output of artificial lighting according to available daylight in inside, as well as keeps uniform workplace illuminance. The basic three components of the daylight responsive dimming system consist of a photosensor, a controller and a dimming ballast. This paper is a fundamental study of photosensor modeling for the daylight responsive dimming system. The correlation between photosensor illuminance on the ceiling and workplace illuminance is an important factor to accuracy of system performance, so that the purpose of this study is to improve accuracy for daylight responsive dimming system. This study performs to derive the optimized conditions of photosensor using the RADIANCE.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.149-149
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast for fluorescent lamps, that is adequate to use with the prevailing dimming controller IC. Through the experiment result using the prototype of the electronic dimming ballast produced by this method, its validity is verified from the electrical and light output characteristics on fluorescent lamps. Also, it is feasible to remote automatic and passive control fur dimming electronic ballast as using a microprocessor, and we easily recognize the lamp condition owing to make a program indicate abnormal behavior for fluorescent lamp at PC screen.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.17-23
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast fer fluorescent lamps, that is adffIuate to use with the prevailing dimming controller IC. Through the experirrent result using the prototype of the electronic dimming ballast rroduced by this rrethod, its validity is verified from the electrical and light outplt characteristics on fluorescent lamps. Also, it is feasible to rerrnte automatic and passive control for dimming electronic ballast as using a micrqrocessor, and we easily recognize the lamp condition owing to rmke a program indicate abnormal behavior for fluorescent lamp at PC screen.screen.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.283-283
• /
• 2010

Smart street light controller is a product with advance micro controller base for energy saving in conventional street lighting systems. Intelligent Street light controller are specially developed for automation and energy saving in conventional street light systems and lighting systems. It is so designed that it operates on sunrise & sun set timings according to longitude of particular location with facilitate to set month wise civil twilight timings to cope up with all seasons. Dimming (Power down) mode selection switch on/off at fixed times with relay or contactor. Night dimming, staggering and intelligent control reduces burn hours and increases the lifetime of lamps with about 30% and low annual operating cost type base are among the most inexpensive wireless technologies available. Low initial costs As PLC wireless, there is no need to establish cable connection.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.157-160
• /
• 2001

We studied about the lighting control system on pc using PLM(Power Line Modem). The PLM is composed of FSK IC-chip and the circuit for the power line communication. We developed the control program using visual c++ language on PC for dimming the lamps. In this paper dimming controller was made with PIC161F874 and its communication speed was 1200 boad rates.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.843-848
• /
• 2006

This paper explains the design and fabrication of an inverter for LCD backlight using a multilayer piezoelectric transformer. That inverter is operated by the burst dimming method whose dimming signal is controlled by the duty ratio of rectangular switching signal to a PWM controller. The brightness of CCFL's are investigated according to the various dimming signals, and when those CCFL's are turned on, the temperature distributions on the piezoelectric transformer and circuit components of the inverter are also investigated by a thermo-camera.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.103-107
• /
• 2006

In this paper, the dimmable electronic ballast for the 250W metal halide lamp was realized by three stage structure. We developed stable the dimming ballast by using a Micro-controller, and measured the output wattage in the dimming range(illumination) from 100% to about 20%. Under the 35% dimming level, it is possible to cause the redution of lamp's life. The dimming performance can reduce the light system's wattage but can reduce the luminance efficiency (lux/watt).

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.220-229
• /
• 2017

In this paper, To take advantage a variety of DC power as the boost DC-DC converter design specifications through the inductor L and capacitor C through PSPICE to calculate the best estimate of the value. Boost DC-DC converter with a switch device using IRF840 and reverse recovery time Schottky diodes with excellent with constant current controller using D10SC6M and resistance can be configured to considering the Power LED Module was driven by the production. Converter's switching frequency is 50 kHz, the first Duty Rate was made to increase gradually depending on the value of the detection were, 10 % in the output voltage. As a result, the simulated Boost Power LED driver characteristics is in comparison with the design specifications, 5% or less as the error was approximated. Finally, when input 15 V were offered, a stable output 24 V were obtained. and Dimming Control through the adjustment of brightness and current consumption were possible.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.4
• /
• pp.201-205
• /
• 2004

The CCFL dimming control methods are generally used lamp current regulation or average current adjustment method feeding the CCFL inverter. Inverter operation frequency is higher than resonant frequency for safe operation. In this study, we design the half-bridge type series and parallel resonant converter circuit that switches at variable frequency modulation methods to control the output power. This method has advantages such as low EMI and reduced harmonics, and it is convenient for dimming control using a microprocessor. The validity of this study is confirmed from the simulation and experimental results.