• Macromolecular Research
• /
• v.15 no.7
• /
• pp.605-609
• /
• 2007

The molecular interactions of polyacrylonitrile (PAN) and cellulose acetate (CA) were investigated thoroughly via dilute solution viscometry in dimethylformamide (DMF) as a common solvent at $30^{\circ}C$. The intrinsic viscosities and viscometric interaction parameters were experimentally determined for both binary (polymer/dimethylformamide) and ternary (PAN/CA/dimethylformamide) systems. As all investigated PAN/CA ternaries evidenced negative viscometric interaction parameter values $({\Delta}b\;&{\Delta}k<0)$, the existence of repulsive intermolecular interactions was deduced, and PAN/CA blends were assigned as immiscible. Moreover, the results of microscopy photograph analysis indicated that pure PAN film evidences a homophasic structure, and the size of the phase domain increases gradually with increases in CA. In DSC analysis, it was determined that the glass transition temperature of the blend film increased slightly with increases in the CA content of the blend film.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.136-143
• /
• 1993

PDSC(pressurized differential scanning calorimeter)를 이용하여 물 또는 물 -DMF(N,N-dimethylformamide) 혼합물을 함유한 아크릴로니크릴 중합체(wet-PAN)의 융점 거동을 조사하였으며 wet-PAN 용융체의 점도측정에 적합한 모세관형 점도계를 제작하여 전단속도 및 온도에 따른 점도변화를 고찰하였다. 물에 의한 wet-PAN의 융점 및 용융점도 는 물의 함량이 증가함에 따라 점근적으로 감소하여 25wt% 이상에서는 거의 일정하였다. 또한 물(25wt% 기준)의 일부를 DMF로 대체하였을 경우에는 융점이 감소하였다. 한편 wet-PAN의 용융점도는 power-law 거동에 준하였으며 물계에서는 power-law 지수(n)가 0.16(19$0^{\circ}C$)~0.18(17$0^{\circ}C$)인데 비하여 물(95)~DMF(5) 혼합물계에서는 0.24(175$^{\circ}C$)~0.25(16 5$^{\circ}C$)로서 점도의 전단담화거동이 약해졌으나 흐름의 활성화에너지는 다소 증가 하였다.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.2
• /
• pp.126-132
• /
• 2018

For the first time, an innovative approach using P(VDF-TrFE) as a polymer electrolyte for high efficiency, all-solid-state supercapacitors is presented. The polymer electrolyte was successfully achieved by dissolving P(VDF-TrFE) copolymers in dimethylformamide (DMF). Thermal analysis and infrared spectroscopy revealed excellent thermal stability up to $400^{\circ}C$ and copolymer's interaction with DMF. Electrochemical capacitors fabricated using P(VDF-TrFE) in DMF and ZnO NWs demonstrated high capacitive performance. Furthermore, the gel electrolyte-based supercapacitors demonstrated excellent mechanical durability up to a bend angle of $120^{\circ}$. Novel P(VDF-TrFE) electrolytes could be a promising approach for applications in flexible, fabric-based, and high-efficiency energy devices.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.894-899
• /
• 2012

In recent years, recycling process has come to be necessary for separating metals, glass fibers and polymer from WPCBs (waste printed circuit boards) due to an increasing amount of electronic device waste. In this study, dimethylformamide (DMF) and attrition mill reactor were used to separate the component such as metals, glass fiber and epoxy resin from WPCBs. Separation of glass fiber from WPCBs was carried out under stirring rates 300~600 revolution per minute (rpm) for 1~2 h as the various agitator. The recycled glass fibers (RGF) were analyzed by thermogravimetric analyzer (TGA) for degree of separation of epoxy resin in the WPCBs. The degree of separation of epoxy resin of WPCBs increased in attrition mill agitator as a mechanochemical process for recycling WPCBs. The RGF separated in the WPCBs was applied as a reinforcement in the RGF/unsaturated polyester composites to reuse as a reinforcement.

• Molecular & Cellular Toxicology
• /
• v.5 no.1
• /
• pp.58-66
• /
• 2009

The 2-year rodent carcinogenicity test involves long-term, repetitive dosing of animals that is both time consuming and expensive. Alternative approaches have been attempted using specific transgenic or knockout mice or toxicogenomics to predict carcinogenicity without conducting a 2-year rodent test. In addition, toxicogenomic analysis of carcinogen-treated animals could also enhance our understanding of molecular mechanisms and aid in the diagnosis of acute toxicity induced by carcinogens. Therefore, we investigated transcription profiles after administering the carcinogens 4,4-dimethylformamide (DMF) and 4-biphenylamine (ABP). BALB/c male mice were treated once with DMF (650 mg/kg i.p.) or ABP (120 mg/kg p.o.). Standard blood biochemistry and histological changes were observed. Gene expression profiles in the livers of mice treated with either vehicle or the carcinogens were analyzed using the Affymetrix $GeneChip^{(R)}$ assay. In all, 1,474 differentially expressed genes in DMF- or ABP-treated mice were identified as being either up- or down-regulated over 1.5-fold (P< 0.01), and these genes were analyzed using hierarchical clustering and Ingenuity Pathways Analysis. Of these, 107 genes were consistently regulated in both carcinogen-treated groups. Genes associated with cancer were upregulated (Por, S100a10, Tes, Ctcf, Ddx21, Eapp, Nel, and Pa2g4) or downregulated (Cbs and Gch1). Toxicological function analysis also identified genes involved in organ toxicity, including hepatotoxicity. These data may help to identify molecular markers for acute hepatotoxicity induced by carcinogens.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.615-619
• /
• 2019

Statistical design of experiments was performed to optimize MOF-235 synthesis process. Concentrations of terephthalic acid (TPA), iron (III) chloride hexahydrate, N,N-dimethylformamide (DMF) and ethanol were important factors to develop the crystal structure of MOF-235. MOF-235 was synthesized with various concentrations of the listed chemicals above and the crystallinity was measured by XRD. The effect of the composition on the synthesis of MOF-235 was evaluated using a statistical analysis. For the variance analysis using F-test, the concentration of ethanol showed the greatest effect on the crystallinity and TPA the least influential. A regression model for predicting the crystallinity of MOF-235 was derived and the prediction results for two synthetic variables were presented using contour plots. Finally, the crystallinity was predicted by a mixture method with $FeCl_3$, ethanol and DMF.

• Clean Technology
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2019

Recently, attention has been paid to obtaining bio-polyols from renewable resources. Successful use of these natural ingredients successfully produced in the industry for the synthesis of various polyurethanes is a very important task. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized from methylene diphenyl diisocyanate (MDI)/1, 4-butanediol and bio-polyol (polytrimethylene ether glycol based on 1, 3-propanediol : B-POL)/polyester polyol (polyadipate diol based on 1,4-butandiol : H-PET). The effect of different ratio of bio-polyol (B-POL)/polyester polyol (H-PET) on the physical properties of polyurethane was investigated. As the B-POL content in B-POL/H-PET mixture increased, the glass transition of soft segment (Tgs) and tensile strength of polyurethane decreased, however, the elongation at break and tear strength increased. On the other hand, artificial leather was produced by wet process using synthesized DMF-based polyurethanes. It was found that there was almost no difference in the effect of the B-POL/H-PET composition on the average size and density (the number of cells per unit volume) of the porous cells formed in artificial leather. These results show that there is no problem in using bio-polyol (B-POL) based polyurethane for artificial leather produced by wet process.

• Journal of Ceramic Processing Research
• /
• v.18 no.11
• /
• pp.810-814
• /
• 2017

Proton exchange membrane fuel cells (PEMFCs) are some of the most efficient electrochemical energy sources for transportation applications because of their clean, green, and high efficiency characteristics. The optimization of catalyst layer morphology is considered a feasible approach to achieve high performance of PEMFC membrane electrode assembly (MEA). In this work, we studied the effect of the solvent on the catalyst layer of PEMFC MEAs fabricated using the electrostatic spray deposition method. The catalyst ink comprised of Pt/C, a Nafion ionomer, and a solvent. Two types of solvent were used: isopropyl alcohol (IPA) and dimethylformamide (DMF). Compared with the catalyst layer prepared using IPA-based ink, the catalyst layer prepared with DMF-based ink had a dense structure because the DMF dispersed the Pt/C-Nafion agglomerates smaller and more homogeneously. The size distribution of the agglomerates in catalyst ink was confirmed through Dynamic Light Scattering (DLS) and the microstructure of the catalyst layer was compared using field emission scanning electron microscopy (FE-SEM). In addition, the electrochemical investigation was performed to evaluate the solvent effect on the fuel cell performance. The catalyst layer prepared with DMF-based ink significantly enhanced the cell performance (1.2 A cm-2 at 0.5 V) compared with that fabricated using IPA-based ink (0.5 A cm-2 at 0.5 V) due to the better dispersion and uniform agglomeration on the catalyst layer.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.2
• /
• pp.135-144
• /
• 2001

This study was performed to measure airborne dimethylformamide(DMF), methyl ethyl ketone(MEK) and toluene and their urinary metabolites concentrations and to determine the relationship between airborne and urinary concentration. Airborne samples and their urinary metabolites were measured 98 male workers who work for 8 synthetic leather factories in a portion of Kyoung-In area. Urine samples were collected at end-of-shift to estimate the exposure levels. 1. The concentration of airborne DMF by process was 8.81 ppm for wet-mixing, 15.05 ppm for wet-coating, 6.03 ppm for dry-mixing, 5.58 ppm for dry-coating, 5.37 ppm for printing, and 9.03 ppm for total. There was statistically significant difference by process. Urinary NMF concentrations of wet-mixing, wet-coating, dry-mixing, dry-coating and printing were $90.55mg/{\ell}$, $79.80mg/{\ell}$, $39.86mg/{\ell}$, $25.23mg/{\ell}$, and $38.15mg/{\ell}$, respectively, and total geometric mean was $56.24mg/{\ell}$. There was significant difference by process. 2. The concentration of airborne MEK by process was 1.89 ppm for wet-mixing, 1.96 ppm for wet-coating, 10.33 ppm for dry-mixing, 29.24 ppm for dry-coating, 14.98 ppm for printing, and 4.87 ppm for total. There was statistically significant difference by process. Urinary MEK concentrations of wetmixing, wet-coating, dry-mixing, dry-coating and printing were $0.93mg/{\ell}$, $0.70mg/{\ell}$, $3.29mg/{\ell}$, $3.29mg/{\ell}$, and $1.06mg/{\ell}$, respectively, and total geometric mean was $1.25mg/{\ell}$. There was statistically significant difference by process. Urinary MEK 3. The concentration of airborne toluene by process was 0.35ppm for wet-mixing, 0.42ppm for wet-coating, 2.95ppm for dry-mixing, 11.67ppm for dry-coating, 4.88ppm for printing, 1.24ppm for total. There was statistically significant difference by process. Urinary hippuric acid concentrations of wet-mixing, wet-coating, dry-mixing, dry-coating and printing were 0.24g/g creatinine, 0.21g/g creatinine, 0.34g/g creatinine, 0.52g/g creatinine, and 0.29g/g creatinine, respctively and total geometric mean was 0.28g/g creatinine. There was statistically significant difference by process. 4. No. of exceeded KPEL was 40 workers(40.8%) for DMF(10ppm), 1 worker(1.0%) for MEK(200ppm), and no worker for toluene(100ppm). No. of exceeded KBEI was 62 workers(63.3%) for urinary NMF($40mg/{\ell}$), 29 workers(29.6%) for urinary MEK, 1 worker(1.0%) for urinary hippuric acid. 5. The regression equations were Log(NMF)=0.4094*Log(DMF)+1.3587(r=0.4516) for DMF, Log(MEKU)=0.1859*Log(MEK)-0.0324(r=0.3303) for MEK, Log(HA)=0.2106*Log(Toluene)-0.5685(r=0.4497) for toluene. Synthetic leather factory workers expose to 3 kinds of organic solvents which are DMF, MEK and toluene. Their urinary NMF and MEK levels were higher than their concentration levels through respiratory. It seems that the urinary levels were affected skin absorption for working habit and alcohol intake.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.9-15
• /
• 2019

The flash points of DMF based organic solvent mixtures used in the synthetic leather manufacturing process were measured. The test group was composed of seven types of solvent mixtures, which included DMF, toluene, and MEK. Each flash point was tested according to the international standard test methods of KS M 2010. The flash points were then predicted using some prediction models and compared with the measured data. From the analysis results, the binary mixtures with a mole ratio of less than approximately 0.7 showed that the measured values were under 25 ℃. This showed that the expectation for the flammable risk lowering effects due to the mixing of high flash point materials was reduced. In addition, the predicted values were evaluated using the average absolute deviation (A.A.D). The results showed that the Le Chatelier's models had an "A.A.D" of 1.95 ℃ and were the closest to the measured values.