• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.292-302
• /
• 2013

Cotton fabrics treated with hybrid materials were developed and prepared. A halogen-free flame retardant and an aromatic amide were blended and applied to cotton fabrics. Thermal and physical properties of the treated cotton fabrics were investigated. The surface of the pure and coated cotton fabrics was characterized by Fourier transform infrared spectroscopy. The elemental composition of the coated surface of the cotton fabric was measured using X-ray photoelectron spectroscopy and compared with that of pure cotton fabric. After being solved in N,N-dimethylacetamide, m-aramid and triphenylphosphine oxide (TPP) were applied to cotton fabrics through a dip-pad-coagulation process. The treated cotton fabrics with recycled m-aramid/TPP resulted in increased limited oxygen index values and thermal resistance.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.25-35
• /
• 2002

The gas permeation properties have been studied on carbon molecular sieve (CMS) membranes prepared by pyrolysis of P84 polyimide under various conditions. P84 polyimide shows high permselectivities (O$_2$/N$_2$= 9.17 and CO$_2$/N$_2$= 35) for various gas pairs and has a good processibility because it is easily soluble in high polar solvents such as N-methylpyrrolidinone (NMP), dimethylformamide (DMF), and N,N-dimethylacetamide (DMAc). After pyrolysis under Ar flow, the change in the heating rate was found to affect the gas permeation properties to some extent. The permeabilities of the selected gases were shown to be in the order He ＞ CO$_2$＞ O$_2$＞ N$_2$for all the CMS membranes, whose order was in accordance with the order of kinetic gas diameters. It also revealed that the pyrolysis temperature considerably influenced the gas permeation properties of the CMS membranes derived from P84 polyimide. The CMS membranes pyrolized at 700$\^{C}$ temperature exhibited the highest permeability with relatively targe loss in permselectivity. This means that the pyrolysis temperature should be varied in accordance with target gases to be separated.

• 폴리머
• /
• 제38권3호
• /
• pp.338-350
• /
• 2014

Cellulose acetate (CA) fiber mats containing inclusion complexes of asiaticoside (AC) in 2-hydroxypropyl-${\beta}$-cyclodextrin ($HP{\beta}CD$) for potential usage as wound dressings were developed. The AC/$HP{\beta}CD$ complex-loaded CA fibers at various $HP{\beta}CD$ to AC molar ratios of 0.5, 1, and 2 were prepared in 90:10 v/v mixture of 80% (v/v) acetic acid and N,N-dimethylacetamide (DMAc) via electrospinning. The maximum released amounts of AC depended on the $HP{\beta}CD$ content and were much greater than those released from the AC-loaded CA fiber mat. In the in vitro study, indirect cytotoxic evaluation with human dermal fibroblasts (HDFa) showed that these materials released no substances in the levels that were harmful to the cells and the cells appeared to attach and proliferate well on these substrates. However, only the CA fiber mats containing AC/$HP{\beta}CD$ complexes at the $HP{\beta}CD$ to AC molar ratio of 0.5 was effective in upregulating the production of collagen of the cultured cells.

• 대한화학회지
• /
• 제32권3호
• /
• pp.163-170
• /
• 1988

N-methyl formamide, N,N-dimethyl formamide, N-methyl acetamide, 및 N,N-dimethyl acetamide의 여러 형태에 대한 상대에너지를 MNDO법으로 구하여 C-N결합 및 메틸기 회전에 대한 회전장벽에 미치는 1-전자 및 입체 반발에너지의 영향을 논의하였다. 그 결과 formamide의 형태안정화는 주로 1-전자 에너지항에 의하여 결정되고, acetamide의 형태안정화는 주로 입체인자항에 의하여 결정됨을 알았다. C-N 결합에 대한 회전장벽을 구한 결과 N-methyl formamide와 N-methyl acetamide에서 입체 장애 효과는 바닥상태에서 보다 전이상태에서 크게 작용하지만 N,N-dimethyl formamide와 N,N-dimethyl acetamide에서 입체장애 효과는 전이상태에서 보다 바닥상태에서 더 크게 작용함을 알았다.

• KSBB Journal
• /
• 제8권3호
• /
• pp.237-242
• /
• 1993

Chitin 섬유는 인장강도가 기대치 보다 약하며 생 체조직 내에서 흡수도가 너무 빨라 수술 후 2주일 정도의 강도 유지밖에 못하는 단점 등이 었으므로, chitin과 그 구조가 비슷한 cellulose와 혼합하여 인 장력과 유연성이 크게 증대된 Chitulose 섬유를 개 발하였다. 우선 chitin과 cellulose가 잘 용해되어 혼 합펼 수 있는 용매로서 DMAc/LiCl을 탐색하였으며 이 용애계에 용해시킨 Chitulose 용액을 가지고 습 식방사하여 얻은 Chitulose 섬유 중, 용매에 대한 chitin cellulose 함량비가 1.5: 0.2얼 때, Instron 시험결과 강도와 유연성이 가장 좋았으며, 멸균시 autoclave해도 변화되지 않아 열에 매우 안정한 것 으로 나타났다. 이 섬유를 가지고 400-500g되는 백서의 피하조직에 매몰시킨 후, 생체 내 분해흡수 도를 관찰한 결과, 매볼 후 14일부터 분해되기 시작 하여 40일 후에는 완전히 분해흡수되였다.

• 한국재료학회지
• /
• 제33권1호
• /
• pp.1-7
• /
• 2023

The physical and antibacterial properties of ophthalmic lenses fabricated by copolymerization with hydrogel monomers using two types of graphene were measured, and their usability as contact lens materials was analyzed. For polymerization, silicone monomers, including SID-OH, 3-(methacryloxy)propyl tris(trimethylsiloxy)silane, and decamethylcyclopentasiloxane, were used, and N,N-dimethylacetamide, ethylene glycol dimethacrylate as a crosslinking agent, and azobisisobutyronitrile as an initiator were added. Also, graphene oxide nanoparticle (GON) and graphene nanoplate (GNP) were used as an additive, and the physical properties of the lenses fabricated after copolymerization were evaluated. The fabricated lenses satisfied the basic physical properties of general hydrogel contact lenses and showed the characteristics of lenses with high water content, and the disadvantage of very weak durability, due to low tensile strength. However, it was confirmed that the tensile strength and antibacterial properties were greatly improved by adding GON and GNP. With GON, the oxygen permeability and refractive index of the fabricated lenses were slightly improved. Therefore, it was determined that the graphene materials used in this study can be used in various ways as a contact lens material.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1063-1068
• /
• 2002

Polyimide와 silica에 물리적 또는 화학적으로 결합된 Polyimide/silica(PI/silica) 혼성체들을 졸-겔법을 통하여 Polyamic Acid(PAA) 또는 end-capped PAA 용액에 tetraethoxysilane을 가수 분해 및 축 중합시켜서 제조하였다. PAA 용액은 dimethylacetamide 용액 내에서 pyromellitic dianhydride와 oxydianiline 단량체들을 개환 반응으로 합성하였다. End-capped PAA 용액은 PAA 용액에 3-aminopropyltriethoxysilane을 첨가하여 제조하였다. 적외선 분광기, 시차 열분석기, X-선 회절 분석기, 주사 전자현미경 및 인장 강도 시험기를 통하여 PI/silica 혼성체 시편들의 특성을 분석하였다. 혼성체 시편들의 물성은 PI와 silica간의 결합형 및 silica의 함량에 의해 영향을 받는다는 것을 확인하였다.

• Membrane and Water Treatment
• /
• 제6권5호
• /
• pp.423-437
• /
• 2015

Polyvinylidene fluoride/fullerene nanoparticle (PVDF/$C_{60}$) composite microfiltration (MF) membranes were fabricated by a non-solvent induced phase separation (NIPS) using N, N-dimethylacetamide (DMAc) as solvent and deionized water (DI) as coagulation solution. Polyvinylpyrrolidone (PVP) was added to the casting solution to form membrane pores. $C_{60}$ was added in increments of 0.2% from 0.0% to 1.0% to produce six different membrane types: one pristine PVDF membrane type with no $C_{60}$ added as control, and five composite membrane types with varying $C_{60}$ concentrations of 0.2, 0.4, 0.6, 0.8 and 1.0%, respectively. The mechanical strength, morphology, pore size and distribution, hydrophilicity, surface property, permeation performance, and fouling resistance of the six membranes types were characterized using respective analytical methods. The results indicate that membranes containing $C_{60}$ have higher surface porosity and pore density than the pristine membrane. The presence of numerous pores on the membrane caused weaker mechanical strength, but the water flux of the composite membranes increased in spite of their smaller size. Initial flux and surface roughness reached the maximum point among the composite membranes when the $C_{60}$ concentration was 0.6 wt.%.

• 멤브레인
• /
• 제21권3호
• /
• pp.270-276
• /
• 2011

기질 고분자인 sulfonated PEEK (sPEEK)와 가교제(cross-linking reagent) 4,4'-ethyldianiline (EdAn), 그래프트제(grafting reagent) 2-phenylethylamine (PEA)을 용매 dimethylacetamide (DMAc)에 녹여 용매증발법을 이용하여 제막하였다. 이민화 반응(imination)과 술폰화(sulfonation) 과정을 거쳐 최종 이온교환막인 cross-linked and grafted sPEEK (CG-sPEEK)막을 제조하였다. FT-IR 분석을 통해 술폰화 및 이민화 반응여부를 확인할 수 있었다. Proton conductivity와 water uptake, volume change를 측정하여 상용화된 Nafion115와 비교함으로써 이온교환막으로서의 활용가능성을 평가하였다. 제조된 CG-sPEEK막의 proton conductivity (0.17 S/cm) 값이 Nafion115 (0.10 S/cm) 보다 우수하게 나타나 이온교환막으로서의 적용가능성을 보여주었다. 다만 높은 water uptake (130%)는 CG-sPEEK의 치수안정성을 위해서 저감시킬 필요가 있다.

• 공업화학
• /
• 제23권3호
• /
• pp.266-270
• /
• 2012

무수물인 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA)에 2,2'-bis(trifluoromethyl)benzidine (TFB), 2,2'-bis(3-aminophenyl)hexafluoropropane (BAFP), 2,2'-bis(3-amino-4-methylphenyl)hexafluoropropane (BAMF), bis(3-aminophenyl) sulfone (APS), p-xylyenediamine (p-XDA), 및 m-xylyenediamine (m-XDA) 등 6종류의 각각 다른 아민 단량체를 이용하여 폴리이미드(PI) 필름을 제조하였다. 얻어진 무색 투명한 PI필름은 무수물과 아민을 반응시켜 폴리아믹산(PAA)을 합성한 후, 용액 캐스팅에 의한 열처리 과정을 통해 얻었다. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermo-mechanical analysis (TMA)를 이용하여 열적 성질을 측정하였고, universal tensile machine (UTM)을 이용하여 기계적 성질을 조사하였으며, 자외선/가시광선 분광광도계(UV-vis.)와 색차계를 이용하여 광학적 성질을 각각 확인하였다. 제조된 모든 필름들은 무색 투명하여 0.98~2.76 사이의 노란색 지수를 보였으며, 25.73~55.23 $ppm/^{\circ}C$사이의 열 팽창 계수를 나타냈다.