• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.173-175
• /
• 2005

Two-dimensional orthogonal variable spreading codes are presented for multiplexing of forward link in direct sequence code division multiple access (DS-CDMA) multiple antennas system And the results of code generation and simulation of 2 dimensional orthogonal variable spreading factors on Jacket matrices are also be investigated. The bit error rate(BER) performance under a multi-user environment for the additive white Gaussian noise (AWGN) channel demonstrated that the proposed scheme could provide flexible rates and lower correlation values

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.2
• /
• pp.33-45
• /
• 2000

Present study was performed to compare different types of teleoperation performance measures. A modified Cooper-Harper rating scale and a distance measure were newly introduced and compared to two traditional measures, the error rate and time-to-completion. Participants performed a simulated telerobotic task with varying visual display interfaces. The results of correlation analyses revealed that the modified Cooper-Harper ratings had a close association with the error rate measure. The distance measure also appeared to be a consistent performance measure, which accounted for both the error rate and time-to-completion. A further analysis, however, showed that the effectiveness of each performance measure varied with the level of task difficulty. The results imply that the choice of performance measure should be made based on the task difficulty as well as the particular task being studied. The results revealed here also have implication for performance measures of various display and control systems including aircraft navigation displays and tactical displays.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.1-7
• /
• 2000

Generally, one-dimensional fiber optic code-division multiple-access(CDMA) system is encoded and decoded using optical orthogonal codes(OOC’s), where two-dimensional fiber optic CDMA system uses optical orthogonal signature pattern codes(OOSPC’s) for parallel data link process. The OOSPC’s should have good autocorrelation and cross-correlation properties. However, if timing information or synchronization of OOSPC’s can be obtained by other means, the property of autocorrelation may not be restricted and we can increase the number of pattern codes. In this paper we introduce the fiber optic CDMA system for parallel transmission of two-dimensional data and investigate methods of generation of two-dimensional pattern codes. The probability density function of interference noise is calculated in interfering OOSPC’s of the users and the corresponding bit error rate is derived.. We compare each OOSPC’s by plotting bit error rate versus threshold values and the number of simultaneous users, from the result, we propose the optimal OOSPC’s conditions for the parallel transmission of two-dimensional data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1147-1154
• /
• 2016

A faster-than-Nyquist (FTN) transmission scheme has been attracting great attention as a spectral efficient transmission scheme. In the FTN transmission scheme, modulated symbols are transmitted at a rate higher than Nyquist rate and thus, a performance loss due to the inter-symbol interference (ISI) is unavoidable. To minimize the performance loss in the FTN transmission scheme, parameters should be carefully optimized. Unfortunately, simulation-based parameter optimization requires significant amount of time and computing power, especially for 2-dimensional FTN systems. In this paper, we propose a 2-dimensional FTN transmission scheme using the optimized parameters based on numerical analysis and simulation results on the ISI. Compared with the conventional Nyquist system, the proposed 2-dimensional FTN transmission scheme not only offers virtually identical bit error performance but also offers higher spectral efficiency.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.182-190
• /
• 2004

This paper presents reconstruction analysis of vehicle trajectory using records of a developed black box, and results of validation tests. For reconstruction of vehicle trajectory, the black box records the longitudinal and lateral accelerations and yaw-rate of vehicle during a pre-defined time period before and after the accident. One 2-axis accelerometer is used for measuring accelerations, and one vibrating structure type gyroscope is used for measuring yaw-rate of vehicle. The vehicle's planar trajectory can be reconstructed by integrating twice accelerations along longitudinal and lateral directions with yaw-rate values. However, there may be many kinds of errors in sensor measurements. The causes of errors are as follows: mis-alignment, low frequency offset drift, high frequency noise, and projecting 3-dimensional motion into 2-dimensional motion. Therefore, some procedures are taken for error compensation. In order to evaluate the reliability and the accuracy of trajectory reconstruction results, the black box was mounted on a passenger car. The vehicle was driven and tested along various specified lanes. Through the tests, the accuracy and usefulness of the reconstruction analysis have been validated.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.87-90
• /
• 1988

This paper reports a simple posteriori error estimate method for adaptive finite element mesh generation using quadratic shape function especially for the magnetic field problems. The elements of quadratic shape function have more precise solution than those of linear shape function. Therefore, the difference of two solutions gives error quantity. The method uses the magnetic flux density error as a basis for refinement. This estimator is tested on two dimensional problem which has singular points. The estimated error is always under estimated but in same order as exact error, and this method is much simpler and more convenient than other methods. The result shows that the adaptive mesh gives even better rate of convergence in global error than the uniform mesh.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.3
• /
• pp.121-126
• /
• 2014

Demand of the data storage becomes more and more growing. This requests the next generation of storage devices to have the dominated storage capability associated with superfast read/write rate. Holographic data storage (HDS) is investigated for a long time and is considered to be a candidate for the future storage system. However, it has two-dimensional intersymbol interference that conventional one-dimensional detection solutions have not yet handled strictly because of the complexity level of system as well as the cost. We propose a new scheme that combines iterative soft output Viterbi algorithm with noise filter for improving the bit error rate performance of HDS.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1555-1562
• /
• 1995

This study represents the non-dimensional cutting force model. With the non-dimensional cutting force model it is possible to estimate efficiently the maximum cutting force during one revolution of cutter. Using the non-dimensional cutting force model, the feed rate and spindle speed are adjusted so as to satisfy the maximum cutting force and maximum machining error. To verify the accuracy and efficiency of the non-dimensional cutting force model, a series of experiments were conducted, and experimental results proved and verified the non-dimensional cutting force model. The NC toolpath verification system developed in this paper uses the non-dimensional cutting force model, so that it is effective for calculating the cutting force and adjusting the cutting conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.89-96
• /
• 2022

In this paper, to evaluate the output quality of the cementitious composite mixture for printing with the ME method for construction 3D printer, visual inspection of the output appearance and the dimensional error rate, compressive strength and flexural strength of the output were measured. As a result of the test, the mixing design with excellent output appearance was P1-2, P1-4, P2-5, P2-6, and the mixing design with good output appearance was P0-1, P1-1, P1-3, P1-6, P1-7 and P2-4. Of these mixing designs, P0-1 and P2-6 had the lowest dimensional error rates As a result of evaluating the compressive strength and flexural strength of the various mixing designs, the Mixing design with excellent output designs showed good mechnical properties. However, mixing designs with excellent mechanical properties does not necessarily have excellent output quality. Therefore, in order to accurately evaluate the output quality, it is judged that visual inspection and dimensional error rate inspection should be performed first, and then the mechanical characteristics should be reviewed.

• ETRI Journal
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2003

This paper introduces an efficient iterative decoding method for high-dimensional block turbo codes. To improve the decoding performance, we modified the soft decision Viterbi decoding algorithm, which is a trellis-based method. The iteration number can be significantly reduced in the soft output decoding process by applying multiple usage of extrinsic reliability information from all available axes and appropriately normalizing them. Our simulation results reveal that the proposed decoding process needs only about 30% of the iterations required to obtain the same performance with the conventional method at a bit error rate range of $10^{-5}\;to\;10^{-6}$.