DOI QR코드

DOI QR Code

Parameter Derivation for Reducing ISI in 2-Dimensional Faster-than-Nyquist Transmission

나이퀴스트율보다 빠른 전송 시스템에서 ISI 감소를 위한 변수 도출 방법

  • Kang, Donghoon (Dept. of Information Communications Eng., Chungnam National University) ;
  • Kim, Haeun (Dept. of Information Communications Eng., Chungnam National University) ;
  • Park, Kyeongwon (Dept. of Information Communications Eng., Chungnam National University) ;
  • Oh, Wangrok (Dept. of Information Communications Eng., Chungnam National University)
  • Received : 2016.07.19
  • Accepted : 2016.10.19
  • Published : 2016.10.31

Abstract

A faster-than-Nyquist (FTN) transmission scheme has been attracting great attention as a spectral efficient transmission scheme. In the FTN transmission scheme, modulated symbols are transmitted at a rate higher than Nyquist rate and thus, a performance loss due to the inter-symbol interference (ISI) is unavoidable. To minimize the performance loss in the FTN transmission scheme, parameters should be carefully optimized. Unfortunately, simulation-based parameter optimization requires significant amount of time and computing power, especially for 2-dimensional FTN systems. In this paper, we propose a 2-dimensional FTN transmission scheme using the optimized parameters based on numerical analysis and simulation results on the ISI. Compared with the conventional Nyquist system, the proposed 2-dimensional FTN transmission scheme not only offers virtually identical bit error performance but also offers higher spectral efficiency.

FTN (Faster-than-Nyquist) 전송 방식은 나이퀴스트 (Nyquist) 율보다 빠르게 신호를 전송할 수 있으나 필연적으로 ISI (Inter-Symbol Interference)가 발생하고 이로 인하여 성능이 열화된다. ISI로 인한 성능 열화를 최소화하기 위해서는 FTN 기법의 변수를 최적화하여 ISI의 양을 최소화할 수 있으나, 2차원 FTN 시스템에는 다양한 변수가 존재하므로 모든 변수에 대해 전산 실험을 수행하여 가장 우수한 성능을 나타내는 변수를 도출하는 것은 많은 시간이 소요된다. 본 논문에서는 2차원 FTN 전송으로 인한 ISI를 수학적으로 모델링하여 ISI의 양을 최소화할 수 있는 2차원 FTN 시스템의 변수 도출 방안을 제안한다. 본 논문에서 제안하는 기법은 2차원 FTN 시스템을 최적화하기 위한 변수를 효율적으로 도출해 낼 수 있다. 또한 2차원 FTN 시스템에 최적화된 변수를 적용하여 기존의 나이퀴스트 시스템과 동일한 비트 오율 (bit error rate) 성능을 제공하면서 전송 효율을 증가시킬 수 있다.

Keywords

References

  1. J. E. Mazo, "Faster-than-Nyquist signaling," Bell Syst. Tech. J., vol. 54, no. 8, pp. 1451-1462, Oct. 1975. https://doi.org/10.1002/j.1538-7305.1975.tb02043.x
  2. A. Prlja, J. B. Anderson and F. Rusek, "Receivers for Faster-than-Nyquist signaling with and without turbo equalization," in Proc. IEEE Int. Symp. Inf. Theory, pp. 464-468, Jul. 2008.
  3. F. Rusek and J. B. Anderson, "Multistream faster than Nyquist signaling," IEEE Trans. Commun., vol. 57, no. 5, pp. 1329-1340, May 2009. https://doi.org/10.1109/TCOMM.2009.05.070224
  4. D. Dasalukunte, F. Rusek, and V. Owall, "Multicarrier faster-than-Nyquist signaling transceivers: Hardware architecture and performance analysis," IEEE Trans. Circuits and System I: Regular Papers, vol. 58, no. 4, pp. 827-838, Apr. 2011. https://doi.org/10.1109/TCSI.2010.2089549
  5. J. B. Anderson and A. Prlja, "Turbo equalization and an M-BCJR algorithm for strongly narrowband intersymbol interference," in Proc. Int. Symp. Inf. Theory Appl., pp. 261-66, Taichung, Taiwan, Oct. 2010.
  6. C. Douillard, A. Picart, P. Didier, M. Jezequel, C. Berrou, and A. Glavieux, "Iterative correction of intersymbol interference: Turbo equalization," Eur. Trans. Telecommun., vol. 6, pp. 507-511, Sept.-Oct. 1995. https://doi.org/10.1002/ett.4460060506
  7. F. Tosato and P. Bisaglia, "Simplified soft-output demapper for binary interleaved COFDM with application to HIPERLAN/2," in Proc. IEEE Int. Conf. Commun., pp. 664-668, Sept. 2002.
  8. A. Dejonghe and L. Vanderdorpe, "Turbo equalization for multilevel modulation: An efficient low-complexity scheme," in Proc. IEEE Int. Conf. Commun., pp. 1863-1867, 2002.
  9. C. Douillard, et al., "Iterative correction of intersymbol interference: Turbo- equalization," Eur. Trans. Telecommun., vol. 6, no. 5, pp. 507-511, Sept.-Oct. 1995. https://doi.org/10.1002/ett.4460060506

Cited by

  1. 나이퀴스트 율보다 빠른 전송 시스템에서 반복 MAP을 이용한 ISI 추정 기법 vol.42, pp.5, 2016, https://doi.org/10.7840/kics.2017.42.5.967
  2. 시스템 함수 및 변복조 개념 적용 능동 방식 3차원 물체 좌표 복원 vol.20, pp.5, 2019, https://doi.org/10.5762/kais.2019.20.5.530