• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.617-626
• /
• 2011

Seven post-tensioned lightweight concrete (LWC) beam specimens were tested under a symmetrical two-point top loading system. The parameters investigated were the amounts of mild longitudinal reinforcement and effective prestressing. The design compressive strength and dry density of the LWC tested were 30 MPa and 1,770 $kg/m^3$, respectively. Similar to post-tensioned normal weight concrete (NWC) beams, the crack propagation and stress increase of the unbonded tendons were significantly affected by the amounts of mild longitudinal reinforcement and effective prestressing. With the increase in the amounts of mild longitudinal reinforcement and effective prestressing, the serviceability and flexural capacity of the beams were enhanced whereas the stress increase in the unbonded tendons decreased. To control the crack width in post-tensioned LWC beams, a minimum amount of mild longitudinal reinforcement specified in ACI 318-08 provision is required. The flexural behavior of post-tensioned LWC beams and stress increase of the unbonded tendons could be rationally predicted by the proposed non-linear two-dimensional analysis. On the other hand, ACI 318-08 flexure provision was too conservative about the post-tensioned LWC beams.

• Journal of the HCI Society of Korea
• /
• v.8 no.2
• /
• pp.9-19
• /
• 2013

There has been much advancement in reality enhancement using audio-visual information. On the other hand, there is little research on provision of olfactory information because smell is difficult to implement and control. In order to obtain necessary basic data when intend to provide smell for video reality, in this research, we investigated user perception of smell in diverse videos and then classified the videos based on the collected user perception data. To do so, we chose five main questions which were 'whether smell is present in the video'(smell presence), 'whether one desire to experience the smell with the video'(preference for smell presence with the video), 'whether one likes the smell itself'(preference for the smell itself), 'desired smell intensity if it is presented with the video'(smell intensity), and 'the degree of smell concreteness'(smell concreteness). After sampling video clips of various genre which are likely to receive either high and low ratings in the questions, we had participants watch each video after which they provided ratings on 7-point scale for the above five questions. Using the rating data for each video clips, we constructed scatter plots by pairing the five questions and representing the rating scale of each paired questions as X-Y axes in 2 dimensional spaces. The video clusters and distributional shape in the scatter plots would provide important insight into characteristics of each video clusters and about how to present olfactory information for video reality.

• Journal of Periodontal and Implant Science
• /
• v.47 no.5
• /
• pp.339-350
• /
• 2017

Purpose: The purpose of this study was to determine the critical diabetes duration in a streptozotocin (STZ)-induced diabetic rat calvarial defect model for experimentation regarding bone regeneration by evaluating the association between diabetes duration and bone healing capacity through histological and radiographic analyses. Methods: Experimental diabetes was induced in 50 of 60 rats by an STZ injection. The rats were divided into 5 groups, including a control group (group 1), according to diabetes durations of 0, 2, 4, 6, and 8 weeks, respectively. Eighteen rats survived: 4 in group 1, 4 in group 2, 4 in group 3, 5 in group 4, and 1 in group 5. Calvarial defects were created at 0, 2, 4, 6, and 8 weeks after STZ injection in groups 1-5. Cone-beam computed tomography scanning was performed at baseline and at 5 and 7 weeks after surgery. The rats were sacrificed 7 weeks after surgery, followed by histological evaluation. Results: The voxel gray values (VGVs) of group 1 and group 2 increased, whereas the VGVs of group 3 and group 4 decreased starting 5 weeks after surgery, although this trend did not reach statistical significance between groups. On the reconstructed 3-dimensional images and based on an analysis of histological features, groups 1 and 2 showed apparent bone regeneration, while groups 3-5 showed very limited bone regeneration. Conclusions: The critical diabetes duration in an STZ-induced diabetic rat calvarial defect model for experimentation regarding bone regeneration was between 2 and 4 weeks. It is suggested that researchers who use STZ-induced diabetic rats wait for more than 2 weeks following diabetes induction before placing implants or conducting bone regeneration studies to allow definite disturbances in bone healing to emerge.

• Journal of Information Technology Applications and Management
• /
• v.15 no.4
• /
• pp.159-188
• /
• 2008

This study suggests strategies which can enable to creation of new opportunities of competitive advantages while operating a long lasting and consistent business with major trading partners, based on interorganizational information systems (IOISs) specially established and installed for interorganizational transactions. Nowadays, IOISs based mechanism having been widely expanded as a conventional business infrastructure for the interorganizational transactions and/or exchanges, it is customary difficult to obtain any strongly sound advantage over the competitors who have adopted even the simplest deployment of the IOIS mechanisms. In this connection, this study intends to investigate the interorganizational collaborative activities conducted by under the auspicious of IOISs, focused on the prospect of the exploitation of IOISs rather than the implementation of the IOISs. In this study, we, firstly, suggest the concept of Electronic Collaboration which can be defined by the collaborative activities conducted by IOISs, compared to the ones conducted on off-line. In addition, we suggest the Electronic Collaboration as a multi-dimensional concept, constituted by three sub-constructs, the Electronic Information Sharing (EIS), the Electronic Joint Activity (EJA), and the construction of the Electronic Relational Knowledge Store (ERKS). Secondly, we empirically verify the effects of relational and environmental determinants on the Electronic Collaboration. In this study, the relational determinants relate to the variables created in interorganizational relationship like Trust, Influence, Relational Specific Asset-asset invested for the transaction-, and Continuity of the relationship. On the other hand, the environmental determinants relate to the variables surrounding the relationship which are difficult to control. We consider Product Complexity, Technological Uncertainty, and Market Variability as the domain of the environmental determinants. To test our hypotheses, we conducted both paper-based survey and online-based survey. After refining the data with missing responses, a total of 150 data was used for analysis. The results were as follows : Firstly, it is statistically significant that the Electronic Collaboration is composed of EIS, EJA, and ERKS. In particular, the results imply that the firms are able to accumulate relational knowledge base as well as to exchange information or knowledge, and to conduct joint activities through effort to further expand the Electronic Collaboration. Secondly, we have verified the individual effects of the relational and the environmental determinants on the Electronic Collaboration. Product Complexity has been revealed as the most influential variable affecting the Electronic Collaboration. Next, Interorganizational Trust and Technological Uncertainty, in that order, have been seen to have significant effects on the Electronic Collaboration. In other words, when products or services seem to be difficult to standardize, and the core technologies seem to rapidly change, the need for the Electronic Collaboration increase. In addition, the observation dictates that the interorganizational trust turns out to be a critical variable in building a relationship and in seeking further collaboration. The results, further, illustrate that the environmental determinants are relatively more effective than the relational determinants, which is not consistent with a few prior researches relational determinants emphasized. It is because this study doesn't consider the size of the firm. A few researchers have given an emphasis on the relational determinants like trust and influence, especially from the perspective of small firms in interorganizational relationship. However, in our study, where all the sizes of the firms are contained, electronic collaboration is considerably affected by the environmental determinants.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1309-1315
• /
• 2014

The switch for a maglev vehicle should be designed such that the vehicle safely changes its track without touching the guiderail. In particular, a medium-to-low-speed EMS -type maglev train relies heavily on a U-type electromagnet where it generates levitation force and guidance force simultaneously. Therefore, it is necessary to evaluate the safety of the vehicle whenever it passes the switch, as it lacks active control of the guidance force. Furthermore, when the vehicle passes a segmented switch, which is a group of curves made up of connected lines with a small radius of curvature, it may come into mechanical contact with the guiderail owing to the excessive lateral displacement of the electromagnet. The goal of this study is to analyze the influence of a segmented switch on the safety of major design-related variables for achieving improved running safety. We propose a three-dimensional multibody dynamics model composed of two cars with one body. Using the proposed model, we perform a simulation of the lateral air gap, which is one of the measurements of the running safety of the vehicle when it passes the switch. The analyzed design variables are the length between short span girder, the articulation angle, the length between two centers of a fixed girder at its ends, and the number of girders. On the basis of the effects of the considered design variables, we establish an optimized design of a switch with improved safety.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.53-62
• /
• 1987

High power lasers provide a controllable and precise energy source in surface transformation hardening. A careful control of the process is needed in order that the surface layer of the material reaches the austenizing temperature, but that it does not melt. In order to achieve this the results of theoretical and experimental studies on the laser surface hardening of a medium carbon steel are described. A two-dimensional computer program, which can be used generally for the determination of transient temperature distributions in welding and heat treatment, was established on the basis of the finite element method. For the confirmation of the accuracy of the numerical analysis, a medium carbon steel (SM 45C) of 5mm thickness was heat-treated with a 1kW CW CO$_{2}$ laser machine, while the traverse speed and the distance from the focal point (defocused distance) were varied. Experimental and numerical results showed a similar tendency in correlations between the hardened zone shape and the process parameters. With increasing beam spot diameter the width and depth of the hardened zone increased for relatively small beam spot diameters, but decreased rapidly after reaching the maximum value, while with increasing traverse speed the width and depth of the hardened zone decreased monotonously. Too small beam spot diameters are to be avoided, since the surface melting would lower the surface hardness and produce an uneven surface which may be unacceptable because of the possible requirement for subsequent machining. It could be observed that for a given traverse speed and laser power input there exists a optimal range of the beam spot diameter, which produce a large width of the hardened zone but no melting on the surface.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.307-325
• /
• 1995

IN order to gain a fundamental data for forecast or control of fish behavior and evaluated the feasibility of an application of the modeling technique to a field, in this paper a numerical model for describing the behavior of fishes in a water tank was presented. The parameters of the model were estimated by using the time-series data on the three-dimensional position of fishes and by applying the least squares algorithm. The estimated parameters were standardized to examine the variation of parameters according to the number of individuals and flow speed that the mean values of parameters were to be zero and their variances were to be one. The results obtained can be summarized as follows: (1) The standardized parameter $a^*$of propulsive force decreased according to increased the number of individuals and the flow speed. (2) The standardized parameter ${k_b}^*$ of interactive force increased according to increased the number of individuals, but decreased according to the flow speed. (3) The standardized parameter ${k_c}^*$ of schooling force increased according to │increased the number of individuals and the flow speed. (4) The standardized parameter │${k_w}^{+*}$│ of repulsive force against wall or bottom increased according to increased the number of individuals, but decreased according to the flow speed. (5) The standardized parameter │${k_w}^{-*}$│ of attractive force against wall or bottom was generally constant according to increased the number of individuals, but increased according to the flow speed. (6) The standardized parameter $\upsilon$ super(*) of damping force increased according to increased the number of individuals, but decreased according to the flow speed.

• Korean Journal of Biological Psychiatry
• /
• v.4 no.1
• /
• pp.67-73
• /
• 1997

The changes of electroencephalogram(EEG) in patients with dementia are most commonly studied by analyzing power or magnitude in certain traditionally defined frequency bands. However because of the absence of an identified metric which quantifies the complex amount of information, there are many limitations in using such a linear method. According to chaos theory, irregular signals of EEG can also result from low dimensional deterministic chaos. Chaotic nonlinear dynamics in the EEG can be studied by calculating the correlation dimension. The authors have analyzed EEG epochs from three patients with dementia of Alzheimer type and three matched control subjects. The multichannel correlation dimension is calculated from EEG epochs consisting of 15 channels with 16,384 data points per channel. The results showed that patients with dementia of Alzheimer type had significantly lower correlation dimension than non-demented controls on 12 channels. Topographic analysis showed that the correlation dimensions were significantly lower in patients with Alzheimer's disease on frontal, temporal, central, and occipital head regions. These results show that brains of patients with dementia of Alzheimer type have a decreased complexity of electrophysiological behavior. We conclude that the nonlinear analysis such as calculating correlation dimension can be a promising tool for detecting relative changes in the complexity of brain dynamics.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.6
• /
• pp.1652-1660
• /
• 2004

Apoptosis of vascular smooth muscle cells(VSMCs) is essential in atherogenesis, being a factor that modulates its early progression rather than a terminal event in the course of the disease. Various stimuli, including oxide lipoproteins, altered hemodynamic stress and free radical, can induced VSMCs apoptosis in vitro. The protective effects of Sophorae Radix (SR) on apoptotic cell death induced by H₂O₂ were investigated in VSMCs. The viability of VSMCs was markedly decreased by H₂O₂. Sophorae Radix protected the H202-induced apoptotic death of VSMCs, which was characterized as nuclear fragmentation and increase of sub-G0/G1 fraction .. Sophorae Radix decreased the activation of caspase-3 like protease induced by H₂O₂ and recovered control level from H202-induced PARP, Bak, Bcl-XL and mitochondrial membrane potential. These results suggest that Sophorae Radix protected VSMCs apoptotic death induced by H₂O₂ via inactivation of caspase-3 and modulation of mitochondrial function. Also, the expression profile of proteins by using two-dimensional (2-D) gel electrophoresis was screened. Future investigations will need to explore the use of an anti atherosclerotic therapy of Sophorae Radix, which relies on inhibition of the proapoptotic activation of the vascular smooth muscle cells.

• Radiation Oncology Journal
• /
• v.36 no.1
• /
• pp.17-24
• /
• 2018

Purpose: This study aimed to assess complications and outcomes of a new approach, that is, combining short course radiotherapy (SRT), concurrent and consolidative chemotherapies, and delayed surgery. Materials and Methods: In this single arm phase II prospective clinical trial, patients with T3-4 or N+ M0 rectal adenocarcinoma were enrolled. Patients who received induction chemotherapy or previous pelvic radiotherapy were excluded. Study protocol consisted of three-dimensional conformal SRT (25 Gy in 5 fractions in 1 week) with concurrent and consolidation chemotherapies including capecitabine and oxaliplatin. Total mesorectal excision was done at least 8 weeks after the last fraction of radiotherapy. Primary outcome was complete pathologic response and secondary outcomes were treatment related complications. Results: Thirty-three patients completed the planned preoperative chemoradiation and 26 of them underwent surgery (24 low anterior resection and 2 abdominoperineal resection). Acute proctitis grades 2 and 3 were seen in 11 (33.3%) and 7 (21.2%) patients, respectively. There were no grades 3 and 4 subacute hematologic and non-hematologic (genitourinary and peripheral neuropathy) toxicities and perioperative morbidities such as anastomose leakage. Grade 2 or higher late toxicities were observed among 29.6% of the patients. Complete pathologic response was achieved in 8 (30.8%) patients who underwent surgery. The 3-year overall survival and local control rates were 65% and 94%, respectively. Conclusion: This study showed that SRT combined with concurrent and consolidation chemotherapies followed by delayed surgery is not only feasible and tolerable without significant toxicity but also, associated with promising complete pathologic response rates.