• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1578-1581
• /
• 2009

This work describes a power and area efficient switched-capacitor cyclic DAC for mobile display drivers. The proposed DAC can be simply implemented with one opamp two capacitors and several switches. Furthermore, the op-amp input referred offset is attenuated at the DAC output without additional offset cancellation circuitry. The operation of the cyclic DAC is verified through circuit level simulations.

• 대한인간공학회지
• /
• 제9권1호
• /
• pp.3-14
• /
• 1990

This article develops a cost-effective and accurate measurement system for heart best intervals. The system is composed of an analog to digital (A/D) converter, an IBM personal computer (an 8088 microprocessor, an 8253-5 timer, an 8259A interrupt controller, and memories) and assembler programs for controlling these hardware components. An exponential smoothing algorithm effectively reduced noise effects from A/D converted electrocardiogram (ECG) signals influenced by 60 Hz alternating current (AC). The system can collect 15000 heart beat intervals with an 1/5400 second unit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.402-403
• /
• 2019

2개의 S/H (Sample and Hold)회로를 내장한 ADC (Analog to Digital converter)는 전동기의 3상 전류를 동시점에서 샘플링(sampling)할 수 없다. 또한 전류 센서 및 아날로그 신호처리 회로의 이득은 오차가 있다. 이러한 이유로 3상 측정 전류의 불평형 상태가 야기될 수 있으며 이 불평형은 전동기 전류제어에 영향을 미친다. 이 논문에서는 2개의 S/H 회로를 이용한 3상 전류 측정의 동기화 및 이득 오차의 보정 방법을 제안하고 컴퓨터 모의 실험을 통하여 제안된 방법을 검증하였다.

• International journal of advanced smart convergence
• /
• 제8권4호
• /
• pp.154-160
• /
• 2019

In this paper, we propose the miniaturization size of wearable Range of Motion(ROM) and a system that can be connected with smart devices in real-time to measure the joint movement range dynamically. Currently, the ROM of the joint is directly measured by a person using a goniometer. Conventional methods are different depending on the measurement method and location of the measurement person, which makes it difficult to measure consistently and may cause errors. Also, it is impossible to measure the ROM of joints in real-life situations. Therefore, the wearable sensor is attached to the joint to be measured to develop a miniaturize size ROM device that can measure the range of motion of the joint in real-time. The sensor measured the resistance value changed according to the movement of the joint using a load cell. Also, the sensed analog values were converted to digital values using an Analog to Digital Converter(ADC). The converted amount can be transmitted wireless to the smart device through the wearable sensor node. As a result, the developed device can be measured more consistently than the measurement using the goniometer, communication with IoT-based smart devices, and wearable enables dynamic observation. The developed wearable sensor node will be able to monitor the dynamic state of rehabilitation patients in real-time and improve the rapid change of treatment method and customized treatment.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.803-815
• /
• 2016

이 논문에서는 GNSS(global navigation satellite system) 신호를 RF(radio frequency) 대역에서 표본화하여 디지털 영역에서 복조하는 직접 RF 표본화 수신기를 설계하고 그 성능을 살펴보고자 한다. 직접 RF 표본화 방식은 IF(intermediate frequency) 대역에서 AD(analog to digital) 변환을 하고 복조하는 기존의 IF 변환 방식과 다르게, 아날로그 믹서(mixer)를 전혀 사용하지 않고 안테나 출력인 통과대역 신호를 직접 AD 변환하여 이후의 수신기의 모든 과정을 디지털 영역에서 처리하는 기술이다. IF 변환 방식과 비교하면 하드웨어 구조가 덜 복잡하고 전송환경 변화에 따른 재구성이 가능하며 하나의 AD 변환기를 사용하여 여러 대역의 신호를 동시에 변환할 수 있다는 장점이 있다. 이와 같은 재구성 기능과 동시 수신 기능은 특정 대역의 신호가 적으로부터 전파방해를 받았을 때 후속시스템으로의 빠른 전환이 필요한 군용 시스템에서 매우 중요한 역할을 한다. 한편 여러 대역의 신호를 한 번에 AD 변환하려면 수신하고자 하는 신호의 반송파 주파수, 대역폭, 표본화 후의 중간주파수 그리고 보호 대역 등을 고려하여 표본화 주파수를 정하는 것이 중요하다. 이 논문에서는 GPS L1, GLONASS G1 및 G2 등의 GNSS 신호를 동시에 수신할 수 있는 표본화 주파수를 선택하고 이를 적용한 직접 RF 표본화 수신기를 설계한다. 또한 설계한 수신기를 상용 AD 변환기와 소프트웨어를 사용하여 구현한 후 실제 신호의 수신시험을 통해 수신 성능을 살펴본다.

• 한국항만학회지
• /
• 제11권2호
• /
• pp.273-280
• /
• 1997

Recently the importance of the cargo handling equipments in a port has been increasing to get strong competition from other ports. Many ports are making efforts to modernize their cargo handling equipments. The kernel technology of such equipments is the speed control of DC motor which is used as an essential part of them. In this paper, we discuss the speed control of a DC motor as a basic work for building cargo handling equipments in a port. DC Motors are still widely used in industrial fields, as driving power motor for electrical fields. DC drives, being easy to control, are widely used in many variable-speed and position control drive system. Traditional analog control circuits used in such applications have many disadvantages. Complex control schemes are difficult to implement with analog components. All these factor and invention of the microprocessor has made it possible to use digital control circuits, using microprocessing system. These digital circuits have been found to be reliable, flexible, and also immune to noise. In this paper it presents the speed control of a SCR DC motor driver which using dual converter by 80c196kc microprocessor. We developed a thyristor power amplifier which does not cause damage thyristor because it is designed to prevent triggering the two SCRs in the same arm simultaneously. And it was analyzed voltage and currents wave at reactive load.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.675-687
• /
• 2010

Structural Health Monitoring (SHM) is the science and technology of monitoring and assessing the condition of aerospace, civil and mechanical infrastructures using a sensing system integrated into the structure. Impedance-based SHM measures impedance of a structure using a PZT (Lead Zirconate Titanate) patch. This paper presents a low-power wireless autonomous and active SHM node called Autonomous SHM Sensor 2 (ASN-2), which is based on the impedance method. In this study, we incorporated three methods to save power. First, entire data processing is performed on-board, which minimizes radio transmission time. Considering that the radio of a wireless sensor node consumes the highest power among all modules, reduction of the transmission time saves substantial power. Second, a rectangular pulse train is used to excite a PZT patch instead of a sinusoidal wave. This eliminates a digital-to-analog converter and reduces the memory space. Third, ASN-2 senses the phase of the response signal instead of the magnitude. Sensing the phase of the signal eliminates an analog-to-digital converter and Fast Fourier Transform operation, which not only saves power, but also enables us to use a low-end low-power processor. Our SHM sensor node ASN-2 is implemented using a TI MSP430 microcontroller evaluation board. A cluster of ASN-2 nodes forms a wireless network. Each node wakes up at a predetermined interval, such as once in four hours, performs an SHM operation, reports the result to the central node wirelessly, and returns to sleep. The power consumption of our ASN-2 is 0.15 mW during the inactive mode and 18 mW during the active mode. Each SHM operation takes about 13 seconds to consume 236 mJ. When our ASN-2 operates once in every four hours, it is estimated to run for about 2.5 years with two AAA-size batteries ignoring the internal battery leakage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.73-77
• /
• 2003

This paper presents a high-speed algorithmic analog-to-digital converter (ADC), which is based on gray coding. The realization method makes use of a two-input maximum circuit to provide a high-speed operation and a low-distortion in the transfer characteristic. The proposed ADC based on the CMOS integrated circuit technique is simple and suitable for implementing a highresolution ADC. The performances of the proposed circuit were studied using the PSPICE analog simulation program. The simulation-results verifying the circuit performances are agreed with the expected values.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.301-304
• /
• 2002

This paper has been studied an A/D conversion system for precision weighing signal process In weighing system. A/D conversion has some problem.; offset drift voltage with environment situation and nonzero value of initial output voltage. The Offset voltage in analog circuit produces a drift of an output voltage before A/D conversion stage. This paper suggested the method of reducing the offset voltage by switching analog chopping circuit and making the initial output close to zero to enhance the swing range by D/A converter. Also, we have designed active filter and digital filter with Auto Zero Tracking algorithm for better signal process of the weighing system.

• 제어로봇시스템학회논문지
• /
• 제6권5호
• /
• pp.396-403
• /
• 2000

A thermal imaging system is implemented for the measurement and the analysis of the thermal distribution of the target objects. The main part of the system is a thermal camera in which a focal plane array typed sensor is introduced. The sensor detects the mid-range infrared spectrum of target objects and then it outputs a generic video signal which should be processed to form a frame thermal image. Here, a digital signal processor(DSP) is applied for the high speed processing of the sensor signals. The DSP controls analog-to-digital converter, performs correction algorithms and outputs the frame thermal data to frame buffers. With the frame buffers can be generated a NTSC signal and transferred the frame data to personal computer(PC) for the analysis and a monitoring of the thermal scenes. By performing the signal processing functions in the DSP the overall system achieves a simple configuration. Several experimental results indicate the performance of the overall system.