• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.545-550
• /
• 2004

Chilli reservoir is agricultural purpose reservoir made in 1945. But its bottom is covered with thick accumulated sewage layer, so its original function has failed. This study conducted cadastral state surveying to survey the state of this area prior to dredging the accumulated bottom sewage layer of Chill reservoir. Prior to cadastral state surveying we analyzed the digital map and aerial photographs of study area. In cadastral state surveying, traversed network was constructed on the road and banks near the reservoir, a surveyed map was made by surveying with Auto-reduction EDM Alidade. From the comparison results of the cadastral map and digital map, we found small chilli reservoir is expressed as rice field on the digital map, and it should be corrected. And when we make digital map and topographic map, the errors will be diminished if we use the cadastral map at the same time.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.527-533
• /
• 2004

This study has based on RTKGPS and DGPS and Digital Video Camera to 3-dimensional position data of road, as a Road Spatial Information. Economic efficiency analysis was applied to road spatial information system built up by four different methods such as conventional surveying, RTK GPS, DGPS, and Digital Video Camera. As a result of analysis, it was shown conventional surveying 100%, it was shown that about 64% in RTKGPS, it was shown that about 63% in DGPS, it was shown that about 37% in Digital Video Camera cost-saving.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42
• /
• pp.9-16
• /
• 2000

GPS(Global Positioning System) surveying is an effective method using satellite measurement system and can be applied to construction of digital map of irrigation canal networks. In this study, GPS surveying method for irrigation structures was developed. A selected main canal of an irrigation district were surveyed by GPS. The obtained surveying results were corrected by post-processed DGPS (Differential Global Positioning System) and imported to GIS for the digital map construction.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.23-30
• /
• 2015

The current cadastral business is being operated by conversion to a digital cadastral management system through computerized registers (land register and forest land register) and maps (cadastral map and forest cadastral map). Digital surveying methods, such as GPS surveying and electronic plane table surveying, are also used for cadastral surveying. At present, fees for cadastral surveying are calculated based on a standard pursuant to the Construction Standard Production Unit System and an announcement by the Ministry of Land, Infrastructure, and Transportation. In many cases, however, the cadastral surveying fee system announced at present fail to apply the digitalized environment depending on the item. This study sought to analyze the cadastral surveying fee system that requires improvement in the rapidly changing digital cadastral management environment, and to prepare a basis to establish a cadastral surveying fee system suitable to the digital environment by suggesting an improvement method for such system. As a result of the study, the following suggestions were made: a method of changing to terms suitable to the digital environment based on the current status analysis; preparation of a new estimation system regarding new estimation items; and re-survey of an estimation system of cadastral confirmation survey and preparation of an estimation system.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.321-326
• /
• 2003

The subjects of this study are to examine and to apply the methods of making 1:5,000 scale maps using 1m resolution stereo images of IKONOS for the Munsan area of Paju-city where aerial photo surveying cannot possible because of security conditions. GCP(Ground Control Point) were acquired from GPS surveying and were to perform geometric corrections on images. Digital Map used IKONOS stereo images and it worked from the digital analytical stereoplotter. From field investigation, RMSE errors of the plane and vertical positions are estimated to 1.706m and 1.231m, respectively. The plane accuracy is better than an accuracy required by NGIS (national GIS) programs. Local information from field investigation was added and the resulting maps should be good as digital map under the scale of 1/5,000.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.455-458
• /
• 2007

Currently, aortal surveying is getting advanced in the world. New digital equipment for aerial surveying makes improvement of accuracy, economical efficiency and reduces cost. for a result, however, there are required to produce a accurate product. In this study, we used two kinds of data, the one which used only GPS/INS data and the other one which used GPS/INS data added on GCPs from digital maps, and made as a mosaic to compare both of them whether which one is better based on digital maps. the result is that the data which used GPS/INS data added on GCPs from digital maps was a lot better than GPS/INS data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.319-326
• /
• 1998

In this study, it was tried to experimentally judge the positional accuracy of digital maps, which are being constructed with a vast of investment and national endeavor. Using GPS and Total Station, field surveying to assess the positional accuracy of 1：5,000 digital maps was conducted. According to these results, the digital maps were compared to the real field test. And in order to check the positional accuracy standard of digital maps, theoretical positional accuracy of 1：5,000 digital maps are compared with that from field test data to propose research activities for hereafter positional accuracy standard of digital map.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.331-337
• /
• 2003

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.10a
• /
• pp.133-137
• /
• 2002

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.99-104
• /
• 2004

Recently, the old surveying method for acquiring surveying-geo information results had a low economic efficiency and a low dependence of precision because it took much times and high costs. So, we acquired law data by execution of control surveying through Static positioning of DGPS(Ashtech). It is computed plainmetric(X, Y) positioning through postprocessing by Prism S/W. And we computed height(Z) through control surveying by ring-closed leveling surveying. After control surveying execution, we built DEM(Digital Elevation Model) using LDT S/W and accuracy 3D detail surveying by EDM(Electronic Distance Measurement) surveying. The purpose of this study was to yield automated digital mapping and the automated amount of materials using ahead data. The conclusions were as follows; First, we built the automated amount of materials system and got high efficiency about personnel, times and precision. Second, when, people precisely positioned on railroads of a high-speed railroad and used GPS surveying, the result was permitted. Finally, it was possible to draw automated profile and cross-section using the 3D terrain model build with the DEM technique.