• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.898-902
• /
• 1987

An end-to-end connect ion between customers on a network such as the PSTN (Public Switched Telephone Network) requires a number of internal connection ammong pieces of transmission, switching and signaling equipment. New switching, transmission, and station systems, as well as new features for existing systems, are continually being developed. and the complexities are such that ensuring compatibility of signaling arrange.ent is a major concern. In this paper, we propose that new signal interface using features of SPC(Stored Program Control) and digital transmission has to be introduced into the domestic telecommunications network in the near future.

• ETRI Journal
• /
• 제34권2호
• /
• pp.168-174
• /
• 2012

In Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) systems, additional very low-rate data can be transmitted by modulating the amplitude and polarity of the transmitter identification (TxID) signal. Although the additional data transmission scheme offers reliable transmission and has a very large coverage area, it has a limitation on the data rate. In this paper, we propose a novel additional data transmission scheme based on the TxID sequences of the ATSC DTV system and Walsh modulation. The proposed scheme not only increases the data rate significantly, but also offers a virtually identical coverage area compared to a conventional scheme.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.21-31
• /
• 2014

본 논문에서는 VLC를 이용한 멀티 홉 멀티미디어 데이터 전송 시스템을 제안개발 한다. 제안된 시스템의 주요한 기여도 및 특징은 다음과 같다. 첫째, 본 연구의 기여도는 LED 통신 기반으로 멀티 홉 기술을 사용하여 멀티미디어 데이터를 장거리 전송이 가능한 전송네트워크 시스템을 개발하는 것이다. 둘째, 개발된 시스템은 다음과 같은 주요한 특징이 있다. 전송부에서 오디오 데이터와 비디오 데이터를 두 개의 채널을 통하여 멀티 홉을 경유하여 전송된다. 오디오 채널의 릴레이에서는 전송된 신호를 포토다이오드로 데이터를 수신 받아 에러체크 및 증폭을 하여 수신부로 전송한다. 수신부에서는 포토다이오드로부터 받은 인코딩된 오디오 데이터를 디코딩 및 증폭을 하여 아날로그 오디오 신호로 컨버팅을 하여 스피커를 통해 오디오 데이터를 출력한다. 비디오 채널의 릴레이에서는 전송된 신호를 포토다이오드로 데이터를 수신 받아 OP-AMP로 신호를 증폭하여 LED를 통하여 수신부로 신호를 전송한다. 수신부에서는 포토 다이오드로부터 받은 비디오 데이터 신호를 OP-AMP로 증폭을 하여 모니터를 통해서 비디오 데이터를 출력한다. 제안된 시스템의 성능평가는 형광등이 켜져 있는 실험실에서 진행되었다. 성능평가 결과 제안된 시스템은 멀티미디어 데이터를 멀티 홉 네트워크를 경유하여 효과적으로 전송할 수 있음을 보여 주었다. 반면에 사용된 색깔에 따라서 전송된 멀티미디어 성능에 약간의 차이가 있음을 알 수 있었다.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.56-61
• /
• 2009

In this paper, A telemetering control system for the HDTV SMPS Aging System is developed. Manual Aging System is usually used to measurement of a produced SMPS. But in this system, the respective operator is arranged and monitoring the test cycle visually- According to an excess of the test time and mistakes of an operator, the reliability makes come to be low. Therefore as using the telemetering control system, it improves a productivity and a reliability of the HDTV SMPS. In the developed system, elec1rical signal is measured from aging system, and converted into the digital signal. Also the telemetering control system is composed of many units - telemetering control units for collecting the data, data relay units for the digital transmission service, data division for the multichannel realization.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.65-72
• /
• 2002

In this study, actuator, sensor, guide, power transmission element and control method are considered for ultra-precision positioning apparatus. Through previous process, single plane X-Y stage with ultra-precision positioning is manufactured. Global stage for the purpose of materialization with robust system, is combined by using AC servo motor and ball screw and rolling guide. And ultra-precision positioning system is developed by micro stage with elastic hinge type and piezo element. global servo and micro servo for the purpose of materialization positioning accuracy with nm(nanometer) are controlled simultaneously by using incremental encoder and laser interferometer as displacement measurement sensor. Through previous process, ultra-precision positioning system(100mm stroke and $\pm$ l0nm positioning accuracy) with single plane X-Y stage are materialized.

• 디지털산업정보학회논문지
• /
• 제14권3호
• /
• pp.39-44
• /
• 2018

Communication in real-time distributed system should have high reliability. To develop group communication Protocol with high reliability, potential fault should be known and when fault occurs, it should be detected and a necessary action should be taken. Existing detection method by Ack and Time-out is not proper for real time system due to load to Ack which is not received. Therefore, group communication messages from real-time distributed processing systems should be communicated to all receiving processors or ignored by the message itself. This paper can make be sure of transmission of reliable message and deadline by suggesting and experimenting fault detection technique applicable in the real time distributed system based on ring, and analyzing its results. The experiment showed that the shorter the cycle of the heartbeat signal, the shorter the time to propagate the fault detection, which is the time for other nodes to detect the failure of the node.

• 방송공학회논문지
• /
• 제2권2호
• /
• pp.182-193
• /
• 1997

본 논문에서는 케이블 TV망을 이용한 VOD, 화상회의, 원격수업, 대화형 오락, 인터넷 서비스 등의 부가서비스를 위한 상향 디지털 신호전송 성능 측정을 통하여 케이블 TV망에서의 양방향 디지털 통신서비스를 위한 기술적, 구조적 문제점 분석 및 대책을 제시한다. ITU-T 권고안 G821의 측정항목을 이용하여 가입자수, 컨버터의 설치여부 등에 따른 신호성능 변화를 3개소의 표본지역을 선정하여 T-1급의(1.544Mbps) 상향 디지털 전송 실측을 하고, 비트오율을 기본으로 한 케이블 TV망에서의 디지털 신호전송 성능을 평가하고 부가서비스 제공을 위한 대책을 제시한다.

• 방송공학회논문지
• /
• 제9권4호
• /
• pp.371-383
• /
• 2004

본 논문에서는 단일 주파수 망(Single Frequency Network: SFN)을 통해 ATSC(Advanced Television Systems Committee) 지상과 디지털 TV 방송을 서비스하기 위해 필요한 기술적인 요구 사항에 대하여 고찰하고, 기존 디지털 동일 채널 중계기(Digital On-Channel Repeater: DOCK)가 가지는 단점을 극복한 등화형 동일 채널 중계기(Equalization Digital On-Channel Repeater: EDOCR)를 제안한다. EDOCR은 오류정정(Forward Error Correction: FEC) 복호 및 부호화부를 사용하지 않기 때문에 모호성(ambiguity) 문제가 발생하지 않아서 EDOCR의 입력 신호와 출력 신호가 동일하며, 고성능 등화기를 사용하여 주송신기와 EDOCR 사이의 전송로에 의해 야기된 잡음 및 다중경로 신호를 제거하므로 EDOCR 출력 신호의 품질이 입력 신호 보다 우수하다. 또한 낮은 안테나 격리도(isolation)로 인해 야기된 궤환(feedback) 신호를 EDOCR 등화기에서 제거할 수 있기 때문에 송신 출력을 높일 수 있다.

• 대한임베디드공학회논문지
• /
• 제15권4호
• /
• pp.159-166
• /
• 2020

The IBC (Intra-Body Communication) benefits from a wireless communication system for exchanging various kinds of digital information through wearable electronic devices and sensors. The IBC using the human body as the transmission channel allows wireless communication without the transmitting radio frequency waves to the air. This paper discusses the results of experiments on electrostatic coupling IBC based on FSK (Frequency Shift Keying) and 1 bit error correction. We implemented FSK communication and 1 bit error correction algorithm using the MCU boards and aluminum tape electrodes. The transmitter modulates digital data using 50% duty square wave as carrier signal and transmits data through human body. The receiver performs ADC (Analog to Digital Conversion) on carrier signal from human body. In order to figure out the frequency of carrier signal from ADC results, we applied zero-crossing algorithm which is used to detect the edge characteristic in computer vision. Experiment results shows that digital data modulated as square wave can be successfully transmitted through human body by applying the proposed architecture of a 1ch GPIO as a transmitter and 1ch ADC for as a receiver. Also, this paper proposes 1 bit error correction technique for reliable IBC. This technique performs error correction by utilizing the feature that carrier signal has 50% duty ratio. When 1 bit error correction technique is applied, the byte error rate at receiver side is improved around 3.5% compared to that not applied.

• Journal of Magnetics
• /
• 제14권2호
• /
• pp.97-100
• /
• 2009

A new eddy current testing probe was developed to separate the eddy current signal distortion caused by permeability variation clusters and ordinary defects created in steam generator tubes. Signal processing circuits were inserted into the probe to increase the signal-to-noise ratio and allow digital signal transmission. The new probe could measure and separate the magnetic phases created in the steam generator tubes in the operating environment of a nuclear power plant. Furthermore, the new eddy current testing probe can measure the defects in steam generator tubes as rapidly as a bobbin probe with enhanced testing speed and reliability of defect detection.