• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.259-268
• /
• 2015

People with auditory processing disorders(APD) do not exactly understand what they hear with normal hearing levels because of difficulties in the processing of auditory information in auditory nervous system. The purposes of this study are to investigate intervention strategies suggested by current literatures and to develop a guide map for APD intervention. The problem based intervention strategies are customized to the specific deficits of a subtype of Buffalo model and Bellis/Ferre model and general intervention strategies are recommended with compensatory strategy, auditory training, environmental modification and so on. Multidisciplinary team should determine and provide various intervention strategies to improve auditory capabilities of a child with APD intensively and persistently. APD intervention guide map is organized with four steps. It helps clinicians and teachers related with the intervention of APD find appropriate intervention strategies and process in order to reduce difficulties of a child with APD and a suspected APD.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.13-22
• /
• 2014

The right to be forgotten is a world-wide issue after the decision of the European Court of Justice which accepted that right. This essay discusses about the guide lines for protecting the right to delete, a category of the right to be forgotten. I classified those guide lines as follows : (1) sensitiveness of the personal information, (2) offensiveness to reasonable and ordinary people, (3) intention of writing the article, (4) value of historical record, (5) importance of privacy comparing with right to know with time flow, (6) public figure, (7) article based on fact or opinion. To effectively protect right to be forgotten and delete, we have to consider Privacy Impact Assessment, using blind system, unification of multiple institutions, and reforming press arbitration system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.47-57
• /
• 2002

The intention of this study is to construct the spatial database and to extract attribute data which are able to complete the omitted data in the topographical map or completion map of construction using the image data of various form such as artificial satellite images, aerial photographs, terrestrial photographs and so on. This study used the single frame images only for the raw image data, supposing the case of rigorous photogrammetric method is not available or rapid acquisition of information is need. The extracted spatial and attribute data from the images are used for modifying and updating the database, and for providing visual effect useful for guide and management of the facilities. This study intended to develop the technique able to apply in the case where comparative high accuracy is not required or rapid modification is necessary, and to verify the possibility of editing and updating the digital map using the photographs or video images remained as old data. Many of previous research on the management system for university facility has been accomplished focusing on the design and construction of database itself. Otherwise, this study aimed for the construction of guide and management system based on compiling the digital map of present state using multi-imagery, and the more applicability was intended too.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.244-249
• /
• 2015

With the recent progress of digital technology, the computer guided surgery utilizing a guide template in the placement of implant has been actively performed, and the method employing the intraoral scanner at the implant prosthesis introduced. Fabrication method of the guide template can be largely classified into design-related rapid prototyping (RP) system and vector milling system, and each of the method has its own weakness in the clinical application despite of excellent accuracy. Thus, in this case study, a working model was fabricated by the wax RP technology using images acquired by CBCT and an intraoral scanner, and the metal bushing was picked up with orthodontic resin cast upon the wax model. Using this method, a surgical guide template was fabricated and used in surgery. From this, we could obtain a satisfactory outcome clinically in the implant placement and the fabrication of the final prostheses and thus report this case herein.

• Journal of Periodontal and Implant Science
• /
• v.52 no.5
• /
• pp.411-421
• /
• 2022

Purpose: In this study, we aimed to evaluate the degree of heat generation when a novel drill design with an irrigation slot was used with metal sleeve-free (MF) and metal sleeve-incorporated (MI) surgical guides in an environment similar to that of the actual oral cavity. Methods: A typodont with a missing mandibular right first molar and 21 bovine rib blocks were used. Three-dimensional-printed MF and MI surgical guides, designed for the placement of internal tapered implant fixtures, were used with slot and non-slot drills. The following groups were compared: group 1, MI surgical guide with slot drill; group 2, MI surgical guide with a non-slot drill; and group 3, MF surgical guide with a slot drill. A constant-temperature water bath at 36℃ was used. The drilling was performed in 6 stages, and the initial, highest, and lowest temperatures of the cortical bone were measured at each stage using a non-contact infrared thermometer. Results: There were no temperature increases above the initial temperature in any drilling procedure. The only significant difference between the non-slot and slot groups was observed with the use of the first drill in the MI group, with a higher temperature in the non-slot group (P=0.012). When the heat generation during the first and the second drilling was compared in the non-slot group, the heat generation during the first drilling was significantly higher (P<0.001), and there was no significant difference in heat generation between the drills in the slot group. Conclusions: Within the limitations of this study, implant-site preparation with the surgical guide showed no critical increase in the temperature of the cortical bone, regardless of whether there was a slot in the drill. In particular, the slotted drill had a cooling effect during the initial drilling.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.452-466
• /
• 2004

As the number of broadcasting channels and programs increases rapidly, the importance of personalized service has been emphasized. In this paper, we propose a practical framework of metadata broadcasting to provide personalized service according to user preferences and various terminal/network conditions. First, we present an overall system architecture of a metadata broadcasting system and then propose several core technologies (particularly in the parts of metadata authoring, metadata encoding, and metadata-based personalized content consumption). For interoperability, the proposed solution is designed to be compliant with the relevant standards of the TV-Anytime Forum, MPEG-7 Systems, and MPEG-2 Systems. Considering a home network environment, we also propose a metadata-based content adaptation scheme. Each component technology has been implemented individually, integrated into an end-to-end prototype broadcasting system, and successfully tested with a set of personalized service scenarios that are also developed in this study.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1396-1403
• /
• 2006

This study shows that the system performance of a positioning system composed of a piezoelectric actuator-driven flexure guide depends largely on the preload applied on the flexure guide and the driving input amplitude. We used a flexure guided system that had an original resonant frequency of 54Hz. Our experiment showed that we could increase the driving bandwidth above the original resonant frequency, for a case involving a large preload and a small input amplitude. Results show that there is a specific 'separation frequency' where the response of the moving mass of the flexure system decouples from the response oi the piezoelectric actuator, and this specific separation frequency can be selected by a proper choice of the preload and the input amplitude. To find the separation frequency, sine sweep tests were performed. To confirm the increased system bandwidth frequency, open-loop sine tracking experiments were performed. Test results show that the system responds very well up to 130 Hz frequency higher than the original natural frequency (54Hz).

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.11-14
• /
• 2017

In this paper, we introduce a method of light focusing effect using prism structure to solve optical discontinuity of conventional external signage LED panels. The prims structures were patterned on a transparent polycarbonate substrate with MEMS and femto-second laser process. We have confirmed that the patterned prism structures on the substrate made artificial LED lights on empty space between the panels by light guide effect of the structure. The artificial light's lateral positions were controlled by thickness of polycarbonate substrate. This cost effective prim patterned transparent film can be utilized on digital signage LED panels to achieve good optical communication.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.659-661
• /
• 2022

본 논문에서는 4차 산업의 제조 혁신을 위한 새로운 방안의 스마트 팩토리를 실헌하기 위한 주요 부품 중에 하나인 리니어 모션 가이드(LM 가이드)에 필요한 센싱 시스템을 제안하였다. 공장 자동화와 정밀 측의 핵심 부품인 LM 가이드를 고정밀, 고정도로 제어할 수 있는 변위 센싱 시스템의 개발이다. 기존의 광학식이나 자기식 변위 센서 기술의 한계를 극복할 수 있도록 와전류(Eddy Current) 기법을 이용하여 LC 공진기와 전도체를 LM 가이드에 장착할 수 있도록 제안하였다. 또한 와전류 센싱부에서 출력되는 미세 인덕턴스 값을 측정할 수 있도록 디지털 신호처리 기술과 컴퓨터/산술 기술을 FPGA를 이용한 HW 시스템을 제작하여 다양한 실험을 진행했다. 본 논문에서 구현한 HW 센싱 시스템을 이용함으로 LM 가이드를 실시간으로 직선 이동시킴으로 실시간으로 변위 값을 디스플레이 부로 출력되어 측정이 가능하다. 개발된 시스템은 LM 가이드의 직선 운동시 변위 값의 분해능과 응답속도 면에서 우수함이 확인됨으로 스마트 팩토리 뿐만 아니라 다양한 장비에도 적용이 가능하다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.653-654
• /
• 2023

한국이 정보 선진국으로 발전함에 따라 노인들의 스마트폰 보유율은 증가하고 있지만, 디지털 환경에 대한 접근성과 경험 부족 등의 이유로 아직도 디지털 약자이다. 그런데도 노령층들이 쉽게 사용할 수 있는 노령자 전용 애플리케이션의 개발은 저조한 실정이다. 본 연구에서는 이러한 문제를 해소하기 위해 노령층을 대상으로 다양한 생활 정보를 제공하는 모바일 애플리케이션, 'Seniors Guide'를 개발하였다. 'Seniors Guide'는 사용자 거주지역 주민 센터의 자치 프로그램 정보, 노인 일자리 정보, TV 프로그램 알람, 투약 시간 알람 설정 기능을 제공하는 등 노령층에서 자주 이용하는 다양한 정보와 기능들을 하나의 애플리케이션에서 유용하게 사용할 수 있도록 하는 앱으로 구현되었다.