• 제목/요약/키워드: Digital equipment

검색결과 1,026건 처리시간 0.027초

HDD를 이용한 저장ㆍ재생기의 구현 및 디바이스 드라이버 프로그래밍 (The Implementation of Recording and Replaying System and Its Device Driver Programming)

  • 최효정;이중호;김대진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
    • /
    • pp.382-385
    • /
    • 2003
  • Introduction of digital broadcasting service does not only mean the change of information transmission method but also the change of total broadcasting system. In past day, Television was only received one-sided information from broadcasting station, but digital broadcasting means that digital television becomes the most important means of information transmission by the introduction of new programming, lots of channels, data service, multi communication. In the age of the digital broadcasting, the recording and replay medium's interest is getting higher. The medium is able to record more than 24 hours' digital broadcasting programs without additional tapes. In this paper the recording and replay device using HDD was implemented and device driver based on linux was programmed. It has Intel PXA250 processor and hard disk is used as storage equipment. And transport Stream is saved on hard disk through PXA250's data bus. FIFO is added to solve the different saving speed and FPGA is also added to display the saved data.

  • PDF

Digital-HF를 이용한 선박 안전 시스템 (Ship safety system using Digital-HF)

  • 최성철;소지은
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2019년도 춘계학술대회
    • /
    • pp.25-28
    • /
    • 2019
  • 정보통신기술의 발전과 더불어 해상통신 시스템 또한 안전성, 효율성, 정확성 그리고 보안을 목적으로 하는 항해 및 통신 장비 관련 연구가 활발히 진행되고 있다. 그러나 100km 초과 원거리 조업 어선에 대해서 위치파악 및 선박상태 등 어선관리에 어려움을 겪고 있다. 그리하여 본 연구에서는 Digital-HF 통신 시스템을 통한 원거리 선박 안전을 위하여 최적주파수를 선택하고 이 주파수를 이용하여 선박 위치 확인이 가능하도록 한다.

  • PDF

연약지반상 PHC파일 항타력 증대장치 개발에 관한연구 (A Study on Development of PHC pile driving force increase device on soft ground)

  • 김종길;이용주
    • 디지털융복합연구
    • /
    • 제18권10호
    • /
    • pp.219-224
    • /
    • 2020
  • 본 연구는 연약지반상에 PHC 파일 시공시 발생하는 인장파에 의해 발생하는 인장 균열에 의한 파일 파손 방지를 위하여 일반적으로 시공되는 선굴착 공법을 대체할 장비 개발에 목적이 있다. 연약지반상에 PHC 파일 항타 중 해머타격시 발생하는 인장파에 의해 인장 균열이 발생하며, 이는 결국 부실시공으로 이어진다. 항타시 발생하는 인장파 발생을 방지하기 위하여 연약층에서는 별도의 항타력 증대 장치를 이용하여 인장파 발생을 방지하여 파일 손상을 방지할 수 있다. 또한 장비 개발시 시공 속도 향상, 시공비 절감 및 소형장비를 사용할 수 있어 매연 및 소음을 감소시키는 친환경 공법이다. 본 개발 장비는 대심도 연약지반이 분포하는 새만금 간척지, 동남아시아 건설시장을 개척할 수 있는 효과적인 장비이다.

이동형 방사선 발생장치 차폐물 설치에 관한 연구 (A study on Protector Performance Evaluation According to X-ray Scattering Distribution of Portable Radiation System)

  • 김형균;성동근;조경미;김상범;김재영;최준호
    • 대한디지털의료영상학회논문지
    • /
    • 제11권2호
    • /
    • pp.85-92
    • /
    • 2009
  • This study, "The study about performance evaluations of mobile cover for X-ray's diffusion and distribution in mobile radiation" is based on the rules of mobile defense apparatus for radiation producer in 2006. To use the mobile cover for X-ray for diagnosis has been compulsory in common wards except operation rooms, emergency rooms and intensive care units. we have confirmed the effect in arbitrary shielding material after Qualitiy Control was carried out for accuracy in an experiment of mobile photographing equipment. The performance evaluation was conducted with the fabrics of selenium, 0.2 mmPb, 0.1 mmPb and aluminiums. Considering the result, we choosed 0.1 mmPb and attached cover to mobile photographing equipment. We have finished making the cover after drew up the draft to attach cover to mobile photographing equipment through the modeling and the structural analysis. the process of the study is that we assembled the manufactured structures and carried out the practical experiment to take the photograph after attaching the fabric of 0.1 mmPb to mobile photographing equipment. It is need of additional thesises hereafter that we compare the result between the part to improve for safety besides convenience in photographic experiment about clinical radiation and the effect of covering the diffusion in condition attached the cover.

  • PDF

홍수 및 수질 오염 감시용 지능형 고속 광 통신 시스템 개발에 관한 연구 (The study on the development of intelligent optical communication system to monitor flood and water pollution)

  • 이진영
    • 디지털융복합연구
    • /
    • 제10권11호
    • /
    • pp.351-358
    • /
    • 2012
  • 본 연구는 강유역의 홍수 및 수질 오염을 보다 효율적으로 관리하기 위해 고품질의 영상정보를 고속으로 전달할 수 있는 광통신 장치로 기존의 장치에 비해 저렴하면서도 네트워크 광선로 및 장비상태를 실시간으로 모니터링이 가능한 시스템을 제안한다. 홍수 통제용으로 이용되는 통신장비는 주로 무인함체 내에 설치되어 있고 이는 장거리 구간의 강 하구에 위치한 홍수 통제소에서 운용하고 있기 때문에 광 케이블의 절단이나 노화 등에 의한 통신 장해 발생시 신속한 대처가 어려운 문제가 있다. 따라서, 본 연구에서는 광 선로를 이용하여 고품질의 영상정보를 고속으로 전달할 수 있으면서도 위와 같은 사고 발생시 1차적으로 이중화 광 케이블 보호절체 기능을 이용하여 문제를 해결하고, 실시간 모니터링 기능으로 발생 지점을 실시간으로 통보해줌으로써 보다 효율적인 관리가 가능한 시스템을 제안하였다. 또한, 제안된 시스템은 지능형 교통 시스템 등 다양한 분야에서 폭넓게 활용이 가능할 것으로 판단된다.

화생방 보호의 성능평가를 위한 무선 실시간 가스 검출기 개발 (Development of Wireless Real-Time Gas Detector System for Chemical Protection Performance Test of Personal Protective Equipment)

  • 가동하
    • 한국군사과학기술학회지
    • /
    • 제23권3호
    • /
    • pp.294-301
    • /
    • 2020
  • Man-In-Simulant Test(MIST) provides a test method to evaluate chemical protective equipments such as protective garments, gloves, footwear and gas mask. The MIST chamber is built to control concentration of chemical vapor that has a activity space for two persons. Non-toxic methyl-salicylate(MeS) is used to simulate chemical agent vapor. We carried out to measure inward leakage MeS vapors by using passive adsorbent dosimeter(PAD) which are placed on the skin at specific locations of the body while man is activity according to the standard procedure in MIST chamber. But more time is required for PADs and there is concern of contamination in PADs by recovering after experiment. Therefore detector for measuring in real time is necessary. In order to analyze in real time the contamination of the personal protective equipment inside the chemical environment, we have developed a wireless real-time gas detector. The detector consists of 8 gas-sensors and 1 control-board. The control-board includes a CPU for processing a signal, a power supply unit for biasing the sensor and Bluetooth-chipset for transmission of signals to external PC. All signals from gas-sensors are converted into digital signals simultaneously in the control-board. These digital signals are stored in external PC via Bluetooth wireless communication. The experiment is performed by using protective equipment worn on manikin. The detector is mounted inside protective equipment which is capable of providing a real-time monitoring inward leakage MeS vapor. Developed detector is demonstrated the feasibility as real-time detector for MIST.

민감도 분석을 이용한 반도체 검사 장비의 X, Y 스테이지 구조의 경량화 연구 (A Study on the Weight Reduction of X,Y stage of Semiconductor Inspection Equipment using Sensitivity Analysis)

  • 고만수;권순기;김참내
    • 디지털융복합연구
    • /
    • 제17권7호
    • /
    • pp.125-130
    • /
    • 2019
  • 민감도 해석은 어떤 설계 변수의 변화가 전체 시스템에 미치는 영향을 확인하기 위한 방법으로, 계산된 민감도는 구조개선 시 중요한 지표가 된다. 본 연구에서는 유한요소해석을 이용하여 설계 변수에 대한 민감도 도출 및 분석 방법과, 민감도 결과를 활용한 구조개선 방법을 제안하였다. 구조 개선이 필요한 실제 반도체 검사 장비를 이용하여 경량화를 위한 설계 변수를 선정하고 설계 변수에 대한 민감도를 유한요소법과 유한차분법을 활용하여 계산하였으며, 장비가 요구하는 과도응답(Transient Response)은 유지하면서도 무게 감소가 가능한 개선 방안을 제시하였다. 유한요소해석과 유한차분법을 이용한 민감도 분석 결과를 이용한다면 구조물의 설계 개선 시 원하는 응력 또는 변위는 만족하면서도 구조적으로 향상된 설계를 할 수 있고, 이는 반도체 검사 장비뿐만 아니라 다양한 분야에서 활용이 가능하다.

적외선 신호저감 장치 모형시험을 위한 계측기의 성능평가 (Performance Evaluation of Measuring Instrument for Infra-Red Signature Suppression System Model Test)

  • 윤석태
    • 한국산업정보학회논문지
    • /
    • 제28권6호
    • /
    • pp.21-27
    • /
    • 2023
  • 현대 함정은 외부로 방사되는 적외선 신호를 낮추기 위해 폐기관에 적외선 신호저감 장치(Infra-Red Signature Suppression system, IRSS)를 설치한다. 그리고 함정은 생의 주기가 매우 긴 전략 자산으로 탑재 장비들의 성능에 대한 높은 신뢰성을 충분히 확보해야 한다. 따라서, IRSS와 같은 장비들은 설계 단계에서 모형시험을 통해 성능평가를 하고 있다. IRSS의 모형시험에서는 다양한 계측기기들이 사용된다. 그러므로, 모형시험 단계 이전에 계측기들의 신뢰성을 평가해야 한다. 본 연구에서는 IRSS 모형시험에 사용되는 계측 장비들의 신뢰성 평가에 관한 연구를 수행하였다. 시험 장비와 계측기는 열 풍동 시험기, 피토 튜브와 디지털 차압계, 열전대 센서 그리고 디지털 기록계가 사용되었다. 계측 결과 열 풍동 시험기의 풍속이 증가할수록 유동의 계측 편차가 감소하였으며, 열전대 센서의 온도는 사용 방법에 따라 반응 속도 및 민감도의 차이를 보였다.

Development of Ship Route Track System Based on Digital Sea Chart with the Capability of Precise Coordinate Analysis of GPS

  • Kang, In-Joon;Kang, Ho-Yun;Chang, Yong-Ku;Mun, Do-Yeoul
    • Korean Journal of Geomatics
    • /
    • 제3권1호
    • /
    • pp.7-14
    • /
    • 2003
  • For GIS to land and sea in Korea, GIS on land was almost completed with big cities by NGIS(National Geographic Information System) business. However, MGIS(Marine Geographic Information System) being constructed by the National Oceanographic Research Institute is still constructing geography information and definition of attribute information and real condition. We are being studied on research to get maximized the ripple effect linking GPS and Navigation techniques on GIS. GPS in accuracy is divided into navigation and precise surveying equipment. Now, GPS technology has been developed very much and low price GPS equipments are introducing. But expense on GPS equipment is high yet. Therefore, GPS equipment for navigation is used on cheap GPS equipment in a car or ship. In this paper, the author used algorithm to convert ellipsoid coordinate between WGS84 and Bessel ellipsoid and to analyze map projection between BESSEL ellipsoid and UTM plane coordinate system. And the author developed ship navigation system with cheap GPS equipment using algorithm of ellipsoid conversion and map projection. The author proposed the necessity on constructing MGIS to manage many ships.

  • PDF

Control Strategy Based on Equivalent Fundamental and Odd Harmonic Resonators for Single-Phase DVRs

  • Teng, Guofei;Xiao, Guochun;Hu, Leilei;Lu, Yong;Kafle, Yuba Raj
    • Journal of Power Electronics
    • /
    • 제12권4호
    • /
    • pp.654-663
    • /
    • 2012
  • In this paper, a digital control strategy based on equivalent fundamental and odd harmonic resonators is proposed for single-phase DVRs. By using a delay block, which can be equivalent to a bank of resonators, it rejects the fundamental and odd harmonic disturbances effectively. The structure of the single closed-loop control system consists of a delay block, a proportional gain and a set of zero phase notch filters. The principle of the controller design is discussed in detail to ensure the stability of the system. Both the supply voltage and the load current feedforwards are used to improve the response speed and the ability to eliminate disturbances. The proposed controller is simple in terms of its structure and implementation. It has good performances in harmonic compensation and dynamic response. Experimental results from a 2kW DVR prototype confirm the validity of the design procedure and the effectiveness of the control strategy.