• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1492-1495
• /
• 2005

This paper presents a new linear-matrix-inequality-based intelligent digital redesign (LMI-based IDR) technique to match the states of the analog and the digital T-S fuzzy control systems at the intersampling instants as well as the sampling ones. The main features of the proposed technique are: 1) the affine control scheme is employed to increase the degree of freedom; 2) the fuzzy-model-based periodic control is employed; and the control input is changed n times during one sampling period; 3) The proposed IDR technique is based on the approximately discretized version of the T-S fuzzy system; but its discretization error vanishes as n approaches the infinity. 4) some sufficient conditions involved in the state matching and the stability of the closed-loop discrete-time system can be formulated in the LMIs format.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.287-292
• /
• 2005

In this paper, a state steering strategy using digital control method for chained system is presented. The chained system can be derived from the velocity or acceleration constraints that cannot be integrable. Especially, the chained system derived from an acceleration constraints is called the high order chained system. Such a system classified as a nonholonomic systems and cannot be controlled to its equilibrium points by continuous and time-invariant controller. Therefore discontinuous and time varying controller should be applied to control nonholonomic system. Using variable transformation, two sub system can be obtained from the chained or high order chained system. Deadbeat control and iterative state steering methods are proposed to control the systems that obtained from the variable transformation. Simulation results are given to show the effectiveness of the proposed control scheme.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.404-411
• /
• 2004

With distribution industrial control system, the use of low cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with CPLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS (Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.410-417
• /
• 2009

This paper represents a design and implementation of a digital controller for a multi-phase synchronous buck converter (SBC) using a digital signal processor (DSP). The multi-phase SBC has generally been used for a voltage regulation module (VRM) of a microprocessor because of its high current handling capability at a low output voltage. The VRM requires high control performance of tight output regulation, high slew rate, and load sharing capability of multiple converters. In order to achieve these requirements, the design and implementation of a digital control system for a multi-phase SBC are presented in this paper. The digital PWM generation, current sensing, and voltage and current controller using a DSP TMS320F2812 are considered. The experimental results are provided to show the validity of the implemented digital control system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.5
• /
• pp.487-492
• /
• 2007

This paper presents the development of digital robust fuzzy controller for uncertain nonlinear systems. The proposed approach is based on the intelligent digital redesign(IDR) method with considering the relaxed stability condition of fuzzy control system. The term IDR in the concerned system is to convert an existing analog robust control into an equivalent digital counterpart in the sense of the state-matching. We shows that the IDR problem can be reduced to find the digital fuzzy gains minimizing the norm distance between the closed-loop states of the analog and digital robust control systems. Its constructive conditions are expressed as the linear matrix inequalities(LMIs) and thereby easily tractable by the convex optimization techniques. Based on the nonquadratic Lyapunov function, the robust stabilization conditions are given for the sampled-data fuzzy system, and hence less conservative. A numerical example, chaotic Lorentz system, is demonstrated to visualize the feasibility of the proposed methodology.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.41-45
• /
• 2001

This paper presents an implementation of motion control system of Switched Reluctance Motor (SRM) using digital hysteresis controller by TMS320F240 DSP. SRM position control system possess several advantages over other motors, including high efficiency, simple structure, low cost, and four-quadrant operation at a wide speed range, especially for the servo drive systems with precision, stability and fast response characteristics in the industrial applications. In the suggested motion control system, position control using digital hysteresis controller is developed, and is evaluated using experimental testing. The developed system for cost reduction and high-performance by fully digital controller is shown a good response characteristic of motion control results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.12
• /
• pp.1160-1166
• /
• 2007

This paper presents the design and implementation of an embedded image stabilization control system for a mobile phone with a built-in camera. Image stabilization is a family of techniques for reducing image blur resulting from minute camera shake due to hand-held shooting, thereby allowing the use of shutter speeds slower than values normally required to obtain sharp images. A mechanical image stabilizer mechanism developed for a camera mobile phone is introduced and a digital control system as a part of the image stabilization system is designed and implemented on an 8-bit microcontroller with integer arithmetic in C. This paper focuses primarily on issues that need to be taken into consideration for fixed-point implementation of the digital controller. Several experimental results are presented to demonstrate the performance of the implemented image stabilization control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1496-1499
• /
• 1997

Recently the major requirements have emerged in industrial substation system field. One is the simple arrangement of main power supply equipment and the other is the introduction of highly computer-controlled system for operation, maintenance and protection. This paper deals with the systems including motor-type relay systems, supervisory and control systems, digital type relay protectiion systems.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.4
• /
• pp.506-515
• /
• 2006

This paper studies an intelligent digital control for nonlinear systems with multirate sampling. It is worth noting that the multirate control design is addressed for a given nonlinear system represented by Takagi-Sugeno (T-S) fuzzy models. The main features of the proposed method are that i) it is provided that the sufficient conditions for stabilization of the discrete-time T-S fuzzy system in the sense of Lyapunov stability criterion, which is can be formulated in the linear matrix inequalities (LMIs); and ii) the stability properties of the trivial solution of the digital control system can be deduced from that of the solution of its discretized versions. An example is provided for showing the feasibility of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.243-245
• /
• 2005

This paper presents a wired and wireless linked remote control system. Ethernet based network communication is used for long distance management and 2.4GHz RF network is adopted for the local area communication between the main network and the ballast. For the effective remote control and management including dimming using wired and wireless linked digital communication networks, control circuit of the ballast is implemented with fully digital circuit using MCU and EPLD. In this paper, the proper frame structure is proposed for the digital-remote lighting-control system and the detailed system configurations including fully digital controlled ballast for the induction lamp are described.