• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.63-71
• /
• 2008

Recently according to supplying high resolution satellite imagery, we take much interest in the update and the revision of digital map and thematic map based on the satellite images. This study analyzed the modeling accuracy for QuickBird imagery and produced the digital map on a scale 1 to 5000 by way of showing an example. find an exhibition digital map was analyzed the positioning accuracy for the presentation of the possibility and the utility in the production and the revision to the digital map using QuickBird imagery. In order to analyze accuracies of constructed data, the digital topographic maps of 1:5000 scale which were produced by Korea National Geographic information Institute(NGI) were used. As a result, the RMSE was calculated at ${\pm}2.207$ m and 2.39 m in x and y direction respectively and it is within the permissible accuracy required for mapping on a scale of 1 to 5000 on the mapping rule notified by the National Geographic Information Institute. It is expected that the results of this study will be fully used in the field of large scale digital mapping and be utilized as basic information in applied field of the production and the revision of digital map.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.13-21
• /
• 2004

Landuse information is used to plan land use, urban and environmental management as base data. And, demand for landuse information is rising due to ecological consideration. But existing method to extract landuse information from aerial photographs or field survey is consume a lot of time and cost. In urban area where the pattern of landuse is densely aggregated, a landuse information needs to be classified in detail for urban planning and management. Therefore this study aims to examine the method to extract landuse information in detail from 1:1,000 digital topographic data. For the purpose, the method was applied to a part of metropolitan Seoul. The results of study shows that extraction of landuse information except forest area is possible. Forest area is needed to describe smaller spatial unit. For the future, the method of describing forest area is improved it will be effectively applicable for the city maintenance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2009

With supply of the domestic digital camera, the relative importance of the digital camera is coming to be high gradually on aerial photogrammetry, the image of digital camera is more applied in image map or digital topographic map production. But, there are cases that do not have position information or attitude information of each photograph in digital camera results. Therefore, we wish to present additional method to get more accurate photograph control point result. In this study, One is called A method, which is the case of entering positioning information of principal point from topographic map as default values that are need to extract tie point automatically using by 56 pieces of photography that are photographed by DMC to the extent to 5 courses and 35 GCP points. The other is called B-method, which is the case of entering exterior orientation parameters that are processed by block adjustment for A-method using by 4 control points in method-1 as default values. We have analyzed about results per control points arrangement for two cases using MATCH-AT that is photograph control point measurement S/W of Germany INPHO company. As a result of analysis, accuracy of B-method was better than that of A-method, and we could get more accurate results if block adjustments are executed including self calibration. Also, it is more effective in expense side that using self calibration for photograph survey in B-method because can reduce GCP numbers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.11-19
• /
• 1999

Lately, with the development of the fields of computer and photogrammetry, Digital Photogrammetric Systems are widely used for the generation of GIS basemap, the acquisition of topographic information and DEM, the formation of digital orthophoto, three-dimensional viewing and so on. According as the demand for the systems is rapidly increasing, we suggest keenly the necessity of domestic technical development, because all of these systems depend on foreign technology until now. In this study, by using digital photogrammetry method, with Visual C++ language, we have developed Digital Photogrammetric Systems for Windows which is able to get three-dimensional coordinates through interior orientation, exterior orientation, epipolar line, image matching from a pair of aerial photos taken with metric camera. This system consists of not only a module which can revise digital map that is being made at National Geographic Institute as a part of data construction project of National Geographic Information System, but also a module which can view three-dimensional image on the screen monitor by using anaglyph for three-dimensional analysis. The digital photogrammetry modules developed in this study are expected to be used as primary modules for the effective management of the urban as well as main modules in developing professional digital photogrammetric systems.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.207-217
• /
• 2002

수치정사사진지도를 제작하기 위한 기반 자료로 스캐닝한 수치항공사진영상과 항공사진의 왜곡 보정을 위한 표정, DEM의 추출과 편집 및 편위 수정에 이르기까지 다양한 처리절차가 필요하다. 또한 영상과 벡티 자료의 중첩을 통해 생선한 영상지도의 편집과 지도제작 작업에는 다양한 미적 요소가 필요하다. 본 연구에서는 수치항공사진 영상을 이용하여, 영상에 내포하는 기하학적 변위를 3차원 모델링 결과와 수치표고모델을 이용하여 소거하고, 수치정사사진을 제작한 후에, 1/5,000 수치지도에서 필요한 레이어와 중첩시킨 수치정사사진지도를 제작하여 그 정확도를 분석하였으며, 각 처리 단계별 문제점의 분석과 개선방안을 제시하였다.

• Korean Journal of Geomatics
• /
• v.3 no.2
• /
• pp.107-114
• /
• 2004

The National Geographic Information Institute (NGII) in korea, through the National Geographic Information System (NGIS) Program, has prepared to generate and disseminate digital elevation data for Korea. This is a pilot research to propose a policy for production, maintenance, and supply of Korea Digital Elevation Data(KDED). Customer demands for accuracy and resolution of DEM was surveyed through a questionnaire. In order to investigate the quality, the technical efficiency and the production cost, a tentative DEM in a small test site was generated based on digital topographic maps (original paper map scale 1:5,000), analytical plotter, and LIDAR. The Accuracy standard for KDED was derived based on source data generation methods. As a result of this research, a uniformly spaced grid model was recommended for KDED. Its preferable grid space is 5m in urban areas and its vicinity, and 10m in field and mountainous area. LIDAR has been valuated as a proper KDED generation method fulfilling customers' demands for the accuracy.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.335-339
• /
• 2005

Digital elevation models(DEM) were generated from SPOT-5 HRG supermode imagery through photogrammetric processing. The reference DEMs were obtained from digital topographic maps of 1/5000 scaleas for analyzing the accuracy of the generated DEMs. The DEMs extracted from HRG stereo image data were compared with digital topograpic map DEMs on several test sections. And digital surface models(DSM) and 3D building model was produced.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.02a
• /
• pp.73-81
• /
• 2004

National Geographic Information Institute (NGII) in Korea, through National Geographic Information System (NGIS) Program, has prepared to generate and disseminate digital elevation data for Korea. This is a pilot research to propose a policy for generation, maintenance, and supply of Korea Digital Elevation Data (KDED). Customer demands for accuracy and resolution of DEM was surveyed through questionnaire. In order to investigate the quality, the technical efficiency and the production cost, a tentative DEM in a small test site was generated based on digital topographic maps (original paper map scale 1 :5,000), analytical plotter, and LIDAR. Accuracy standard for KDED was derived based on source data and generation methods. As results of this research, we recommend uniformly spaced grid model for KDED. Its preferable grid space is 5m in urban and its vicinity; and 10m in field and mountainous area. LIDAR has been valuated as a proper KDED generation method fulfilling customers demand for the accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1997

In the digital mapping for data base contruction, the positional information is used as an important tool in LIS/GIS(Land Information System/Geographic Information System) that is used for a facility management, urban/cadastral management as well as in spatial analysis. In this paper, for an error analysis of X, Y coordinates data on digital map, test area was classified by topography, density, and slope. The coordinates on topographic map were assumed as true values and they were compared with the coordinates on digital map. A result of the numerical test show that a vector data of line type had more gross error than vector data of polygon type. And, SME(stanadrd mean error) of urban or intermountain area had small values compared to that of suburban area in topography analysis. The SME of dense and middle zone had small values compared to that of loose zone in density analysis. In another slope analysis. the SME of steep of gentle slope had small values compared to that of flatland.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.61-69
• /
• 2009

In mid-July, 2006 the torrential rainfall across Gangwon-do region caused 48 casualties and 1,248 houses submerged, resulting in damages with the restoration costs of 3 trillion and 512.5 billion won. This was because the topographic characteristics of Gangwon-do region for which mountainous areas mostly account increased the effects of landslide. In this study, the landslide region was shot using the PKNU No.4 system immediately after the occurrence of landslide in order to analyze it as objectively, exactly, and rapidly as possible. 1,054 areas with landslide occurrence were extracted by digitizing the shot images through visual reading after orthometric correction using ERDAS 9.1. Using the Arc GIS 9.2, a GIS program, hydrologic, topographic, clinical, geologic, pedologic aspects and characteristics of the landslide region were established in database through overlay analysis of digital map, vegetation map, geologic map, and soil map, and the status and characteristics of the occurrence of the landslide were analyzed.