• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2957-2962
• /
• 2011

The purpose of this paper is a semiotic analysis of a dating show on television program, and the attribute contains a variety of social and cultural phenomenons. Analyzed in this study shows relates with TVn's "Love Switch" from cable channel of the text through the classification of gender and thinking of behavior revealed by the structural characteristics of the men and women's appearances. And, how the television culture We rule the world and develop a sense of whether they are examined.

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.37-38
• /
• 2006

In this paper, the fire characteristics of circuit breakers for low voltage during switching arcs were analyzed according to the characteristics of combustible materials. Arc dispersion and ignition process were taken by high speed imaging system and digital camera. In this experiment, four resistors were connected as loads. To discover the fire characteristics of circuit breakers by combustible materials, ethanol and cotton were installed as combustibles near contacts respectively. In case of ethanol, fire broke out near the contacts while switch was turned on and turned off. Whereas, in case of cotton, fire broke out near deteriorated contacts while switch was turned off.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.47-53
• /
• 2013

Nowadays, Advanced country have devised a plan energy-saving through lighting effectiveness and increasing performance of lighting control system. If it uses the LED as a source of light then conserve electricity by 50%. This paper implement LEMS(Lighting Energy Management System) that applicate and Smart Dimmer and Smart Switch that control the digital LED light, support wired-wireless communication using USN(Ubiquitous Sensor Network). This system of validity and reliability control special purpose lamp including indoor and outdoor lighting and landscape lighting effectively. It minimize the use of indoor and outdoor lighting energy by USN remote integral control function of Digital System Lighting of LED and increase effectiveness of energy and is a collaborative system that can feedback the use of electricity by measurement itself through Web and Switch.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.584-591
• /
• 2000

Power Quality Compensator(PQC) has been installed to protect the sensitive loads against the voltage disturbances, such as voltage sag and interruption. In general, static switch is used for the purpose of link between utility and PQC. So transfer operation of the static switch play a important part in the PQC. Many studies on the structure and control of PQC have been progressed in active, but these researches have been rarely mentioned about any voltage-disturbances-detection method to start the PQC operation. In this paper, a new voltage-disturbances-detection algorithm for computer application loads using the CBEMA/ITIC curve is proposed for transfer operation of the static switch. The proposed detection algorithm is implemented to get fast detecting time through the comparison of instantaneous 3-phase voltage values transferred to DC values in the synchronous reference frame with the operating reference values. To get the robust characteristics against the noise, a first order digital filter is designed. The magnitude falling and phase delay caused by the filter are compensated through the error normalizing and numerical analysis using transfer function, respectively. Finally, the validity of the proposed algorithm is proved by ACSL simulation and experimental results.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.6
• /
• pp.1581-1589
• /
• 1999

In B-ISDN(Broadband Integrated Services Digital Networks), the efficient implementation of multicast function is very important since the demand for distributed type of service such as VOD(Video On Demand) system is expected to grow. In this paper, the multicast performance characteristics of fully-interconnected switch fabric used for our research is the proper architecture for a small-sized switch element, and it uses bit addressing method for addressing scheme and thus it is easy to implement multicast function without adding a function block. To incorporate the bursty nature of traffic in ATM networks, we used IBP(Interrupted Bernoulli Process) model as an input traffic model. We presented and analyzed the simulation results in terms of the multicast operation of the switch. Based. on this study, it its analyzed that congestion avoidance may be feasible if we use a proper traffic control scheme by finding an overload point due to multicast.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2000

In this paper, we study a cause of malfunction of switch to control drive motor in DFMS(Digital Flux Mapping System) which can measure incore neutron flux of the nuclear plant, and develope a method to solve this problem. DFMS has the type of generating contact signal by mechanical switch lever, which is operated whenever thimble detector inserted or withdrawed through thimble Guide Tube. However the characteristics of the lever tend to be changed by mechanical degrade or bad environment and the lever finally generates errotic contact signal. Therefore we installed electric coil ass'yin the outside of Guide Tube instead of mechanical switch assy's. In addition we applied resonance effect to control circuit and installed condenser in the input of power supply to protect noise and interference. After completion of this improvement, we tested this improved device repetitively under the various conditions. In conclusion, we identified the generation of the desired contact signal and the prevention of detector failure through plant surveillance test during normal plant operation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.584-591
• /
• 2004

The conventional analog-based firing circuit can be implemented by comparing a linearly decreasing periodic sawtooth waveform synchronized to the ac supply, with a control signal corresponding to the desired converter delay angle. This circuit requires a large number of passive components (resistance and capacitor) and careful adjustment of the synchronization circuity. In this paper a novel firing circuit is proposed for thyristor switch. The proposed circuit is implemented by using digital components(FPGA, A/D, and DSP etc.) on the basis of the analog cosine method.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.245-250
• /
• 2010

Input-series-output-parallel (ISOP) converters consisting of multiple modular DC/DC converters can enable low voltage rating switches to be used under high voltage input applications. This paper presents a digital control strategy, which can achieve equal sharing of input voltage for a modular ISOP system consisting of two-transistor forward DC/DC converters by forcing the input voltages of neighboring modules to be equal. The proposed scheme is analyzed using small signals analysis based on the state space average method. The performance of the proposed control strategy is verified with an experimental prototype of an ISOP converter made up of three two-switch forward converters.

• Journal of electromagnetic engineering and science
• /
• v.1 no.2
• /
• pp.131-138
• /
• 2001

The DTV (Digital TV) tuner for an 8-VSB (Vestigial Side-Band) modulation was developed to meet the requirements of the ATSC (Advanced Television Systems Committee). The double frequency conversion and the active tracking filter in the front-end were used to cancel interferences between adjacent channels and multi-channels by suppressing the IF beat and the Image frequency. However, It was impossible to get frequency mapping between the tracking filter and the first VCO (Voltage Controlled Oscillator) in the existing DTV tuner structure which differs from the NTSC (National Television Systems Committee) tuner. This paper, therefore, suggests an assailable structure and a new method for the automatic frequency selection by mapping the frequency characteristics over the tracking voltage and the combined HW which is composed of a Micro-controller, an EEPROM (Electrically Erasable Programmable Read Only Memory), a DAC (Digital-to-Analog Converter), an OP amplifier, and a switch driver.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.12
• /
• pp.609-614
• /
• 2001

This paper presents a multi output converter system that controls, simultaneously and independently, the separate Buck converter and Boost converter with the different specification by one DSP digital controller. As two separate converters are regulated by only one DSP, it is possible to achieve the simple digital control circuit for regulating multi output DC-DC converter. By setting the software switch state, PI and Fuzzy controller can be applied as a controller for each converter without any change of hardware. Also, it is included the control characteristics comparison between PI and Fuzzy controller. The control characteristics of each PWM DC-DC converter is validated by experimental results.