• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.247-250
• /
• 2008

최근 무선통신용 LSI는 배터리 수명과 관련하여, 저전력 동작이 중요시되고 있다. 따라서 Digital CMOS 신호처리와 더불어 동작 가능한 SI (Switched-Current) circuit를 이용하는 Current-mode 신호처리가 주목받고 있다. 그러나 SI circuit의 기본인 Current Memory는 Charge Injection에 의한 Clock Feedthrough라는 문제점을 갖고 있기 때문에, 전류 전달에 있어서 오차를 발생시킨다. 본 논문에서는 Current Memory의 문제점인 Clock Feedthrough의 해결방안으로 CMOS Switch의 연결을 검토하였고, 0.25${\mu}m$ CMOS process에서 Memory MOS와 CMOS Switch의 Width의 관계는 simulation 결과를 통하여 확인하였으며, MOS transistor의 관계를 분명히 하여, 설게의 지침을 제공한다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.81-84
• /
• 2001

A signal path control switch has been designed and implemented with AT&T 0.5${\mu}{\textrm}{m}$ CMOS ORCA FPGA. This device controls the path of digital signals in SDH-based transmission system. The proposed switch is suitable for self-healing operation which protects against transmission network failure. The self-healing operation of the switch is effectively done by the reconfigurable information stored in the registers of the switch. This device consists of eight subparts such west-east transmitting parts, west-east receiving parts, add-drop control parts, AIS control Part, and CPU interface part. The device is capable to a ring network as well as a linear network.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.501-515
• /
• 2014

The enforcement of the digital switch been two years, but more than half of the viewers are still not enjoying the benefits of it. Therefore, the government proposed that 8VSB transmission method so that majority of the viewer is able to enjoy the benefits of a digital switch. However, the claim has been suggested that 8VSB transmission method will have negative impacts on broadcast market feedback. In this regard, this study verified the effect of 8VSB and the method of minimization on the broadcast market. This study has conducted in-depth interviews concerned experts to achieve this purpose. Results of an interview revealed that the negative impact on the market of content and platforms, network is very small. In other words, the majority of the experts argued that the policy of government about 8VSB transmission are inadequate and it is improved to broaden the choice of the broadcast consumer.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.91-105
• /
• 2022

Most of the preceding studies related to Internet Primary banks are studies on laws, regulations, and expected effects of introduction, and studies on financial consumers' intention to switch to financial services are insufficient. Apply to the PPM(Push-Pull-Mooring)theory to find out the factors that influence financial consumers' intention to switch services from commercial banks to Internet Primary banks. A survey was conducted service users, 1st-order and 2nd-order factor analysis were performed using Smart PLS 3.0. As a result, it was confirmed that the Pull, Push and Mooring had a positive (+) effect on the Intention to Switch, and the Mooring, which is a moderating variable, did not have a moderating effect on the Intention to Switch of the Push and the Pull. The scope of application of the PPM theory, which was used in the service conversion research, was extended to Fintech services, and it can provide various practical useful implications, such as the strategy and spread of Internet Primary banks, and it will be used in various studies to study consumer attitudes.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.21-24
• /
• 2005

The problem of fluctuation-induced digital errors in a rapid single flux quantum (RSFQ) circuit has been very important issue. So in this experiment, we calculated error rate of RSFQ switch in superconductiyity ALU, The RSFQ switch should have a very low error rate in the optimal bias. We prepared two circuits Placed in parallel. One was a 10 Josephson transmission lines (JTLs) connected in series, and the other was the same circuit but with an RSFQ switch placed in the middle of the 10 JTLs. We used a splitter to feed the same input signal to the both circuits. The outputs of the two circuits were compared with an RSFQ XOR to measure the error rate of the RSFQ switch. By using a computerized bit error rate test setup, we measured the bit error rate of 2.18$\times$$10^{12}$ when the bias to the RSFQ switch was 0.398mh that was quite off from the optimum bias of 0.6mA.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.9
• /
• pp.471-475
• /
• 2001

ln this paper, a micromachined micromechanical switch is presented. The presented switch is operated in the vertical direction to the substrate by an electrostatic force between two parallel plates. The moving plate is pulled down to connect the bumps of the bias node$(V_{DD}/ or GND)$ to the bumps of the output node when a oltage difference exists between the moving plate and the input plate. The switch was designed to operate at a low switching voltage$(\risingdotseq5V)$ by including a large-area, narrow-gap, parallel plate capacitor A theoretical analysis of the designed switch was performed in order to determine its geometry fitting the desired pull-in voltage and release voltage. The designed switch was fabricated by surface micromachining combined with Ni electroplating. From the experimental results of the fabricated switch, its pull-in voltage came Out to be less than 5V and the measured maximum allowable current was 150mA. The measured average ON-state resistance was about 8$\Omega$, and the OFF-state resistance was too high to be measured with digital multimeter.

• The KIPS Transactions:PartC
• /
• v.8C no.2
• /
• pp.164-172
• /
• 2001

최근 인터넷의 확산과 더불어 디지털 비디오 라이브러리(DVL : Digital Video Library) 서비스에 대한 관심이 고조되고 있다. 그러나 현재의 통신망 대역폭과 스위칭 환경 하에서는 종단간 QoS 보장하는데 많은 제약사항이 존재한다. 따라서 본 논문에서는 비디오 스트림 처리를 효율적으로 수행하여, 지연-처리율 특성을 만족할 수 있는 스트림 스위칭 구조를 제안하고 이에 대한 성능을 분석하였다. 제안된 ATM-기반 스트림 스위치는 각각 다중화되는 CBR(Constant Bit Rate) 및 VBR(Variable Bit Rate) 스트림의 QoS(Quality of Service)를 보장해야만 한다. 성능분석 결과는 제안된 스위치의 처리율이 r=4일 때 약 0.996의 값을 보였으며, 지연시간도 부하가 0.7 이하일 때 2미만으로 특정되었다. 이 결과는 제안된 구조가 적당한 입력 스트림의 그룹핑을 통하여 비디오 응용을 위한 처리율 및 지연 요구사항 QoS를 보장할 수 있음을 보여준다.

• Journal of IKEEE
• /
• v.11 no.1 s.20
• /
• pp.30-37
• /
• 2007

This paper proposes a detection method of position of OFF-switch. Each switch has the parallel path with a serial combination of passive element, its parallel path has each different frequency characteristics. Frequency characteristic of ON-switch reveals a flat spectrum irrelevant to frequency characteristic of passive element connected in parallel to its each terminal and frequency characteristic of OFF-switch reveals the same characteristic as one of passive element connected in parallel. Detection of position of OFF-switch is done by measuring the similarity of each spectrum corresponding to frequency characteristic of passive element connected in parallel to OFF-switch. The measure of their similarity is to calculate Euclidean distance between their test spectrum and reference spectrum. The spectrum with the smallest distance among reference spectrum is recognized as the spectrum of OFF-switch. The real time digital signal processing system is implemented to detect the position of OFF-switch by using spectrum matching.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.770-777
• /
• 2009

We have developed a fully functional reconfigurable optical add-drop multiplexer (ROADM) switch module using a polymer integrated photonic lightwave circuit technology. The polymer variable optical attenuator (VOA) array and digital optical switch array are integrated into one polymer PLC chip and packaged to form a 10-channel VOA integrated optical switch module. Four of these optical switch modules are used in the ROADM switch module to execute 40-channel switching and power equalization. As a wavelength division multiplexer (WDM) filter device, two C-band 40-channel athermal arrayed waveguide grating WDMs are used in the ROADM module. Optical power monitoring of each channel is carried out using a 5% tap PD. A controller and firmware having the functions of a 40-channel switch and VOA control, optical power monitoring, as well as TEC temperature control, and data communication interfaces are also developed in this study.

• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.124-128
• /
• 2012

Many different converter topologies have been developed with a view to use the minimum number of switches in order to reduce construction costs. Among this research, the four-switch converter topology with a novel PWM control technique based on the current controlled PWM method is thought to be a good solution. In this paper, a two dimensional time-stepped voltage source finite-element method (FEM) is used to analyze the characteristics of a Flux-Reversal Machine (FRM) with a 4-switch converter. To validate the proposed computational method, a digital signal processor (DSP) installed controller and prototype FRM are built and experiments performed.