• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.374-385
• /
• 2019

This paper presents an optimal implementation of a Daubechies-based pipelined discrete wavelet packet transform (DWPT) processor using finite impulse response (FIR) filter banks. The feed-forward pipelined (FFP) architecture is exploited for implementation of the DWPT on the field-programmable gate array (FPGA). The proposed DWPT is based on an efficient transpose form structure, thereby reducing its computational complexity by half of the system. Moreover, the efficiency of the design is further improved by using a canonical-signed digit-based binary expression (CSDBE) and advanced functional sharing (AFS) methods. In this work, the AFS technique is proposed to optimize the convolution of FIR filter banks for DWPT decomposition, which reduces the hardware resource utilization by not requiring any embedded digital signal processing (DSP) blocks. The proposed AFS and CSDBE-based DWPT system is embedded on the Virtex-7 FPGA board for testing. The proposed design is implemented as an intellectual property (IP) logic core that can easily be integrated into DSP systems for sub-band analysis. The achieved results conclude that the proposed method is very efficient in improving hardware resource utilization while maintaining accuracy of the result of DWPT.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.505-506
• /
• 2023

본 논문은 임베디드시스템을 적용한 대용량 고부하 레이다 플랫폼의 구동 제어 방안을 제안한다. 군사적 방어 목적용 지대공 유도 미사일 시스템의 구성품인 다기능 레이다 시스템은 고중량의 안테나를 구동해야하는 대용량 고부하 레이다 구동 플랫폼이 필수이다. 이 다기능 레이다 시스템은 360도 방위각 전방향을 일정한 속도로 방위각 회전하며 감시정찰 및 방어 임무를 수행한다. 여기서 대부하 레이다 구동 플랫폼은 방위각회전 구동장치를 이용하여 일정한 속도로 360도 방위각 방향으로 안정적인 회전을 가능하도록 구동 제어한다. 본 구동 제어를 실시간으로 구현하기 위해 임베디드시스템인 DSP(Digital Signal Processor)가 포함된 제어모듈은 구동모듈에 회전구동 명령을 인가하여 일정한 회전각속도로 구동하도록 회전구동 모터를 실시간 제어한다. 고부하 레이다 플랫폼은 직구동모터타입의 회전구동모터, 회전체에 신호와 전원을 공급하기 위한 회전슬립링, 회전체의 회전각도를 측정하기 위한 회전센서로 구성된 방위각회전구동장치와 전체 전원을 공급받아 사용 목적에 맞게 변환하여 공급하는 전원모듈, 구동모터에 구동전원을 공급하기 위한 구동모듈, 회전구동 명령에 따라 구동제어하기 위한 제어모듈로 구성된 제어장치로 구분된다. 본 논문에서는 대부하 레이다 구동 플랫폼을 시뮬레이션 모델링으로 구현하고 제안하는 구동 제어 방안은 구동제어시뮬레이션으로 검증한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.147-153
• /
• 2003

In this paper, implementation of active noise barriers(ANB) to attenuate exterior noise which is propagated through open windows is presented. The leaky multiple channel LMS algorithms are used for adaptive filters tc improve the convergence property, and a new type of the active noise barrier is proposed. The attenuation effects of conventional active noise control(ANC) systems using leaky multiple channel LMS algorithms and the proposed system are compared by experiments using a TMS320C33 digital signal processor. Noise attenuation levels at the points of error microphones are similar for both systems, but average noise attenuation effects of the proposed system for an entire space of an experimental enclosure are much better than conventional ANC systems.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.488-493
• /
• 2014

This paper presents a carrier-based pulse-width modulation(PWM) method for reducing the common-mode voltage of a three-level four-leg converter. The idea of the proposed PWM method is intuitive and easy to be implemented in digital signal processor-based converter control systems. On the basis of the analysis of space-vector PWM(SVPWM) and sinusoidal PWM(SPWM) switching patterns, the fourth leg pole voltage of the three-phase converter called "f leg pole voltage" is manipulated to reduce the common-mode voltage. To synthesize f leg pole voltage for the suppression of the common-mode voltage, positive and negative pole voltage references of f leg are calculated. An offset voltage is also deduced to prevent the distortion of a, b, and c phase voltages. The feasibility of the proposed PWM method is verified by simulation and experimental results. The common-mode voltage of the proposed PWM method in peak-to-peak value is 33% in comparison with that of the conventional SVPWM method. The transition number of the common-mode voltage is also reduced to 25%.

• ETRI Journal
• /
• v.20 no.2
• /
• pp.133-148
• /
• 1998

The objective of this paper is to present an adaptive algorithm for computing the weight vector which provides a beam pattern having its maximum gain along the direction of the mobile target signal source in the presence of interfering signals within a cell. The conjugate gradient method (CGM) is modified in such a way that the suboptimal weight vector is produced with the computational load of O(16N), which has been found to be small enough for the real-time processing of signals in most land mobile communications with the digital signal processor (DSP) off the shelf, where N denotes the number of antenna elements of the array. The adaptive procedure proposed in this paper is applied to code division multiple access (CDMA) mobile communication system to show its excellent performance in terms of signal to interference plus noise ratio (SINR), bit error rate (BER), and capacity, which are enhanced by about 7 dB, ${\frac{1}{100}}$ times, and 7 times, respectively, when the number of antenna elements is 6 and the processing gain is 20 dB.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1375-1379
• /
• 2004

Unmanned Helicopter has several abilities such as vertical Take off, hovering, low speed flight at low altitude. Such vehicles are becoming popular in actual applications such as search and rescue, aerial reconnaissance and surveillance. These vehicles also used under risky environments without threatening the life of a pilot. Since a small aerial vehicle is very sensitive to environmental conditions, it is generally known that the flight control is very difficult problems. In this paper, a flight control system was designed for an unmanned helicopter. This paper was concentrated on describing the mechanical design, electronic equipments and their interconnections for acquiring autonomous flight. The design methodologies and performance of the helicopter were illustrated and verified with a linearized equation of motion. The LQG based estimator and controller was designed and tested for this unmanned helicopter.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1225-1230
• /
• 2003

In this study, Real-time estimation and compensation procedure are developed for the laser interferometer. This system is designed with homodyne quadrature-phase detection method using the Laser interferometer. The errors in this system are due to noise, disturbance and undefined model dynamics. DSP(Digital Signal Processor) is applied for real time compensation of these errors. This estimator and compensation is verified with measurement test.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.300-305
• /
• 2009

This paper describes the intelligent robot's hand with three-axis finger force sensors for an intelligent robot. In order to grasp an unknown object safely, it should measure the mass of the object, and determine the grasping force using the mass, then control the robot's fingers with the grasping force. In this paper, the intelligent robot's hand for an intelligent robot was developed. First, the three-axis finger force sensors were designed and manufactured, second, the intelligent robot's hand with three-axis finger force sensors were designed and fabricated, third, the high-speed control system was designed and manufactured using DSP( digital signal processor), finally, the characteristic test to grasp an unknown object safely was carried out. It was confirmed that the developed intelligent robot's hand could grasp an unknown object safely.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.79-80
• /
• 2013

MMC(Modular Multilevel Converter)는 여러 개의 Power Module을 직렬로 연결하여 정현파에 가까운 고전압의 파형을 얻을 수 있는 토폴로지로 대용량 전력변환 분야의 요구를 만족하면서 전력 품질을 향상시킬 수 있어 근래에 상당히 주목받고 있다. 당사에서는 5Mvar급 STATCOM(STATic synchronous COMpensator)을 MMC 형태로 제작하였다. 제작된 5Mvar급 STATCOM은 한 상당 12대의 Power Module로 구성하여 25-Level로 제작되었다. 제어시스템은 DSP(Digital Signal Processor)를 이용하였으며, 하나의 Main Controller와 다수의 Cell Controller, FPGA 보드 등으로 구성되어 있다. Controller 간의 상호 정보를 교환하기 위해 CAN 통신을 이용하였고, Power Module의 스위칭을 위한 보드는 각각에 연결되어 있으며, Cell Controller보드와는 절연을 위해 광신호로 연결하였다. 본 논문에서는 MMC 시스템의 제어기간 CAN 통신인터페이스와 Power Module의 PWM 동기화에 대해 설명을 하였다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.122-132
• /
• 1993

In this paper, a self tuning control algorithm is proposed for the high performance drive of DC servo motor, which is adequate to the servo system having frequent load variation. In order to realization of the algorithm, the control system is developed using a fixed point high speed digital signal processor. TMS320C25. Control algorithm is composed of two parts. One is estimation law part using recursive least mean square method, the other is control law part using minimum variance control method. For the purpose of easiness of applying adaptive algorithm, developed control system is based o PC-DSP structure which can develop, debug programs and monitor the dynamic behaviors,etc. Through computer simulation and experimental results, it was verified that proposed control system could estimate system parameters and was robust to the variation of the load and as a result, was adequate to the servo motor drives.