• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.457-462
• /
• 2017

This paper proposes a digital power control of the LLC resonant half-bridge inverter for high power microwave oven application. Conventional half-bridge inverter for driving a microwave oven uses a hardware-based power control method which varies the frequency according to the AC source voltage. In this case, it is difficult to control the output power according to the variation of the load status of magnetron. The proposed power control consists of an instantaneous current generator and a current controller. Instantaneous current generator makes an instantaneous current reference from power command using input voltage information. Current controller controls input current which has an information of status of magnetron. The proposed power control does not require any compensation algorithm for the change of the load status of the magnetron and change of input voltage. The validity of the proposed method for the control of the change of input voltage and frequency is verified by both simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.36-40
• /
• 2003

On analyzing the power circuit of a DVR system, control limitations and control targets are presented for the voltage compensation in DVRs. The control delay in digital controllers increases the dimension of the system transfer function one degree higher which makes the control system more complicate and more unstable. Based on the power stage analysis, a novel controller for the compensation voltages in DVRs is proposed by a feedforward control scheme. Proposed controller works well with the time delay in the digital control system. This paper also proposes a guide line to design the control gain, appropriate output filter parameters and inverter switching frequency for DVRs in digital controllers. Proposed theory is verified by an experimental DVR system with a typical digital controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.129-130
• /
• 2010

For the high power demand and N+1 redundancy, this paper presents the digital load share (LS) controller design and the implementation of paralleled phase-shifted full-bridge converters (PSFBC) used in distributed power systems. By adopting the digital control strategy, separately used ICs for PSFBC and LS control functions in analog systems can be merged into a cost-effective digital controller. To compensate and stabilize both PSFBC and LS loops with the direct digital design approaches, small-signal model of the system is derived in discrete-time domain. The steady-state and dynamic load sharing performances are also investigated. Experimental results from two 1.2 kW paralleled PSFBC modules are shown to verify the proposed work.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.83-93
• /
• 2006

A new high efficiency and low profile on-board DC/DC converter for digital car audio amplifiers is proposed. The proposed converter shows low conduction loss due to the low voltage stress of the secondary diodes, a lack of DC magnetizing current for the transformer, and a lack of stored energy in the transformer. Moreover, since the primary MOSFETs are turned-on under zero-voltage-switching (ZVS) conditions and the secondary diodes are turned-off under zero-current-switching (ZCS) conditions, the proposed converter has minimized switching losses. In addition, the input filter can be minimized due to a continuous input current, and an output inductor is absent in the proposed converter. Therefore, the proposed converter has the desired features, high efficiency and low profile, for a viable power supply for digital car audio amplifiers. A 60W industrial sample of the proposed converter has been implemented for digital car audio amplifiers with a measured efficiency of $88.3\%$ at nominal input voltage.

• 한국콘텐츠학회논문지
• /
• 제7권6호
• /
• pp.69-78
• /
• 2007

오늘날의 내장형 이동 시스템은 MP3플레이어나 디지털 캠코더와 같이 하나의 기능만을 지원했던 단일 응용프로그램 시스템에서 PMP(Portable Multimedia Player), PDA(Personal Digital Assistants)와 같이 MPEG, W3플레이어, 전자사전, DMB(Digital Multimedia Broadcasting), 게임, 통신 기능 등을 모두 포함하는 하나의 디지털 컨버전스 기기로 변화해가고 있다. 이러한 변화는 CPU 성능 향상과 메모리, 저장장치의 증가, LCD의 크기 증가와 같은 하드웨어적인 요구사항의 증가로 이어졌고, 이로 인해 단말기에서 소모하는 전력이 그에 비례하여 증가하였다. 소모 전력의 증가에 따른 배터리 용량의 증가는 더딘 상황이며, 이를 해결하기 위해 소프트웨어적으로 소모 전력을 감축시키는 연구들이 많이 진행되고 있다. 본 논문에서는 소모 전력 감축 기법이 적용된 실시간 운영체제 UbiFOSTM을 ARM9계열의 MBA2440에 탑재하였다. 전력 감축 기법으로 시스템 작업량 관찰에 기반한 동적 전력 관리 기법과 장치 전력 관리기법을 적용하였다. 본 논문의 저전력 기법을 통해 작업량에 따라 24% 이상의 소모 전력 감축효과가 있음을 확인하였다.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1637-1639
• /
• 2014

In the past, the analog protection relays have been widely used for the safety-related systems in the nuclear power plants due to their stability and reliability. Meanwhile, as the high performance digital system has been developed, the digital systems have been adopted in the non-safety systems. However, since the digital systems currently used in the non-safety systems were not developed according to Q-class standard, Commercial Grade Item Dedication (CGID) procedure should be performed in order to apply them to the safety-related system. The purpose of this paper is to describe the CGID procedure including the analysis of the hardware architecture as well as the software embedded in protective relay to apply to the emergency diesel generator in the nuclear power plant. The entire CGID procedure was performed strictly according to the international standard and regulations.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1447-1453
• /
• 2014

This paper proposes the new method based on the availability of three points measurement and convexity of photovoltaic (PV) curve characteristic at the maximum power point (MPP). In general, the MPP tracking (MPPT) function is the important part of all PV systems due to their power-voltage (P-V) characteristics related with weather conditions. Then, the analog-to-digital converter (ADC) and low pass filter (LPF) are required to measure the voltage and current for MPPT by the digital controller, which is used to implement the PV power conditioning system (PCS). The measurement and quantization error due to rounding or truncation in ADC and the delay of LPF might degrade the reliability of MPPT. To overcome this limitation, the proposed method is proposed while improving the performances in both steady-state and dynamic responses based on the detailed investigation of its properties for availability and convexity. The performances of proposed method are evaluated with the several case studies by the PSCAD/EMTDC$^{(R)}$ simulation. Then, the experimental results are given to verify its feasibility in real-time.

• 한국항해항만학회지
• /
• 제26권3호
• /
• pp.295-302
• /
• 2002

현재의 디지털 통신시스템은 매우 다양한 디지털 변조방식을 채택하고 있다. 이러한 통신시스템에서는 인접채널에 대한 간섭을 최대한 줄이기 위해서 필연적으로 선형 전력증폭기를 요한다. 선형 전력증폭기는 매우 다양한데 그 중에서 전방궤환 전력증폭기는 구조상 광대역이면서 선형화 정도가 매우 우수하다. 전방궤환 전력중폭기에 사용되는 지연선로의 손실로 인하여 전체효율이 감소한다. 본 논문에서는 이러한 지연선로를 손실이 매우 작은 지연필터를 사용함으로써 효율과 선형성을 동시에 개선하였다. 측정된 결과 ACLR이 약 17.43dB 개선되었으며 이것은 지연필터를 사용함으로써 2.54dB 더 개선되었음을 나타낸다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.675-676
• /
• 2008

The computer based three phase power analysing system has been developed as a traveling standard for onsite power calibration. The system is utilized with digital-to-analog converts which were synchronized each other. Using digital signal processing technique the software has been developed to calculate power parameters. The calibration system is fully traceable to national standard system and, accuracy allows the calibration of industrial power measurement systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.958-959
• /
• 2006

For the life extension of Jeju thermal power plant, digital PWM excitation system was replaced by KEPRI. This system consist of TMR(Triple Modular Redundant) controller, dual PWM power inverter for field current control and MMI etc. The Performance test during the commissioning verified the reliability of digital PWM excitation system and recently, this system has been operated successfully.