• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.1989-2000
• /
• 2015

In this paper, digital peak current mode control for single phase H-bridge inverters is developed and implemented. The digital peak current mode control is achieved by directly controlling the PWM signals by cycle-by-cycle current limitation. Unlike the DC-DC converter where the output voltage always remains in the positive region, the output of DC-AC inverter flips from positive to negative region continuously. Therefore, when the inverter operates in negative region, the control should be changed to valley current mode control. Thus, a novel control logic circuit is required for the function and need to be analyzed for the hardware to track the sinusoidal reference in both regions. The problem of sub-harmonic instability which is inherent with peak current mode control is also addressed, and then proposes the digital slope compensation in constant-sloped external ramp to suppress the oscillation. For unipolar PWM switching method, an adaptive slope compensation in digital manner is also proposed. In this paper, the operating principles and design guidelines of the proposed scheme are presented, along with the performance analysis and numerical simulation. Also, a 200W inverter hardware prototype has been implemented for experimental verification of the proposed controller scheme.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.87-93
• /
• 2012

In this paper, we propose an analog-to-digital converter to set the address of a I2C slave chip. The proposed scheme converts a fixed voltage between 0 and VDD to the digital value which can be used as the address of the slave chip. The rising time and the falling time are measured with digital counter in a serially connected RC circuit, while the circuit is being charged and discharged with the voltage to be measured. The ratio of the two measured values is used to get the corresponding digital value. This scheme gives a strong point which is to be implementable all the parts except comparator using digital logic. Although the method utilizes RC circuit, it has no relation with the RC value if the quantization error is disregarded. Experimental result shows that the proposed scheme gives 32-level resolution thus it can be used to configure the address of the I2C slave chip.

• 융합신호처리학회논문지
• /
• 제1권2호
• /
• pp.131-137
• /
• 2000

본 논문은 소프트웨어 무선에 적합한 전송장치로써 로직회로에 의해 생성되어지는 디지털신호를 직접 무선으로 변환시킬 수 있는 디지털-무선 변환장치를 제안한다. 이러한 회로가 실현되어지면 변조회로, RF회로와 안테나를 1개의 간단한 디바이스로 실현할 수 있어 소프트웨어무선의 본질인 소프트웨어처리에 의한 무선의 제어를 직접 수행할 수 있게 된다. 본 논문의 디지털-무선 변환장치는 채널화용 PN코드가 부여하는 위상각도에 의해 무수히 많은 채널화를 기할 수 있으며 디지털화에 의하여 설계에 유연성을 주게 되므로 하드웨어의 비중을 최소화시키고 소프트웨어 베이스의 유연한 기능을 갖는다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1757-1762
• /
• 2003

With distribution industrial control system, the use of low cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with PLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS (Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권4호
• /
• pp.260-267
• /
• 2015

In the past, we implemented a web-based smart education platform, but this is not efficient in a smart or mobile education environment. Therefore, in this paper, we propose an Android-based e-board smart platform for a smart or mobile education system. Here, we use Anoto digital pen- and dot pattern-based technologies. This Android-based smart education platform is efficient for a smart education environment. Further, we implement the hardware and software parts of the technologies, an Anoto-based trajectory recognition algorithm, and a probabilistic neural network for handwritten digit and hand gesture recognition.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.139-145
• /
• 2002

In this paper, we proposed an intelligent digital redesign method for a class of fuzzy-model-based controllers, effective fur stabilization of continuous-time nonlinear systems. The TS fuzzy model is used to expend the results of the digital redesign technique to nonlinear systems. The proposed method utilized the recently developed LMI technique to obtain a digitally redesigned fuzzy-model-based controller. The intelligent digital redesign problem is converted to equivalent problem, and the LMI method is used to find the digitally redesigned fuzzy-model-based controller. The stabilization conditions of TS fuzzy model are derived for stabilization in the sense of Laypunov stability. In order to demonstrates the effectiveness and feasibility of the proposed controller design methodology, we applied this method to the single link flexible-joint robot arm.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권1호
• /
• pp.29-33
• /
• 2004

I propose a personalized digital library system (PDLS) based on an advanced distributed agent platform. The new platform is developed by improving the DECAF (Distributed Environment-Centered Agent Framework) which is one of the conventional distributed agent development toolkits. Also, a mobile ORB (Object Request Broker), Voyager, and a new multi agent negotiation algorithm are adopted to develop the advanced platform. The new platform is for mobile multi agents as well as the distributed environment, whereas the DECAF is for the distributed and non-mobile environment. From the results of the simulation the searched time of PDLS is lower, as the numbers of servers and agents are increased. And the user satisfaction is four times greater than the conventional client-server model. Therefore, the new platform has some optimality and higher performance in the distributed mobile environment.

• 한국통신학회논문지
• /
• 제16권4호
• /
• pp.301-308
• /
• 1991

본 연구에서는 라디오 데이타 수신 시스템의 복조 회로를 제안하고, 잡음에 모험된 디지탈 전송 신호의 오차확률을 구하여, 그의 성능을 평가하였다.일반적인 논리회로와 PLL을 이용하여 수신 복조회로를 설계 및 구현하였으며, 이것을 이요 여 라디오 데이터 수신 시스템의 새로운 집적회로 설계가 가능하도록 하였다. 또한 복원된 디지탈 신호의 오율특성을 계산하여 기존의 복조회로와 등가의 성능임을 확인하였다.임을 확인하였다.

• 한국도서관정보학회지
• /
• 제39권4호
• /
• pp.261-281
• /
• 2008

이 연구에서는 부산 울산 경남지역의 대학도서관 전자정보자원 검색시스템과 전자정보자원 제공처의 검색시스템을 분석하였다. 도서관 검색시스템의 접근점과 검색조건들(검색어의 조합방식, 검색어 일치방식, 검색의 상세수준)은 서로 다르고 통일성이 없었다. 제공처 검색시스템의 접근점은 그 종류가 불필요할 정도로 많고 서로 달랐으나 검색조건들은 비교적 정밀하였다. 이러한 결과를 토대로 전자정보자원 검색시스템의 개선을 위한 제언을 하였다.

• 전자공학회논문지B
• /
• 제32B권1호
• /
• pp.96-102
• /
• 1995

This paper presents the VHSIC Hardware Description Language(VHDL) implementation of the Fixed Point Covariance Lattice(FLAT) algorithm for an Linear Predictive Coding(LPC) analysis and its related algorithms, such as the forth order high pass Infinite Impulse Response(IIR) filter, covariance matrix calculation, and Spectral Smoothing Technique(SST) in the Vector Sum Exited Linear Predictive(VSELP) speech coder that has been Selected as the standard speech coder for the North America and Japanese digital cellular. Existing Digital Signal Processor(DSP) chips used in digital cellular phones are derived from general purpose DSP chips, and thus, these DSP chips may not be optimal and effective architectures are to be designed for the above mentioned algorithms. Then we implemented the VHDL code based on the C code, Finally, we verified that VHDL results are the same as C code results for real speech data. The implemented VHDL code can be used for performing logic synthesis and for designing an LPC Application Specific Integrated Circuit(ASOC) chip and DsP chips. We first developed the C language code to investigate the correctness of algorithms and to compare C code results with VHDL code results block by block.