• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.2
• /
• pp.31-39
• /
• 2016

In this paper planed Virtual Reality user interface that recently hot issue using MVLS(Multipurpose Visual Language System). Proposed system is planed for more with ease approach new type environment system. The point of this system is for more few the number of time of act to get want to result. That is easy build for Virtual Reality environment system that user so far, who did not experience. Also too, application to the environment through Multipurpose Visual Language System based, can be required to increase the case of user of existing applications, not only a simple application infrastructure Virtual Reality. This has the advantage of being able to under Virtual Reality condition the environment for the use of a wide range of applications such as view TV, video and other contents. By using the proposed system, the experience in virtual realities that have not felt during the general public to be able to easily and quickly, virtual reality or 3D Expected to can one step closer to the needs of general and industry.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.303-315
• /
• 1997

This appendix deals with the Korean air interface standard, TTA-62, for CDMA Mobile Systems, (CMS) [1]-[2]. The standard has been set up by Telecommunications Technology Association (TTA) which is a standardization organization in Korea [3]. This standard is an important specification that should be determined prior to the development of a digital cellular system. The CMS has been developed on the basis of this standard and the papers published in this special issue are the results of the CMS development. This appendix also describes the technical commonality of these papers. It covers the outline of the air interface and protocol specifications. The outline includes its major characteristics, radio protocol architecture, functionalties, and call processing. A comparison is also given between TTA-62 and IS-95[4], a North American digital cellular standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.990-1006
• /
• 1997

This paper describes an interface function and its performance assessment for high-bit-rate digital subscriber line (HDSL) under ATM. The interface of HDSL function of ATM system was achieved by HDSL subscriber physical layer board assembly(HSPA) which was modeled as design standard for ATM. We have presented a new worst case of subscriber line conditions from existing results of investigations on impairments such as crosstalk, impulse noise, longitudinal, power line noise and others. We have measured the maximum service loop length available by HDSL, and found that HSPA, at a 2.048Mbps data transmission, is possible within a carrier serving area(CSA) under the worst case loop noise conditions at an error rate or 10$^{-7}$ on a two coordinated unshielded twisted pairs in the presense of impairments. We conclude tht, in terms of a performance-per-lin simulator, the HSPA is an excellent candidate for HDSL implementation under ATM.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.455-458
• /
• 2011

4:10 deserializer is proposed to recover 1:10 serial data using 1/4-rate clock. And then, 1/4-rate CDR(Clock and Data Recovery) circuit was designed for SERDES of high-speed serial display interface. The reduction of clock frequency using 1/4-rate clocking helps relax the speed limitation when higher data transfer is demanded. This circuit is composed of 1/4-rate sampler, PEL(Phase Error Logic), Majority Voting, Digital Filter, DPC(Digital to Phase Converter) and 4:10 deserializer. The designed CDR has been designed in a standard $0.18{\mu}m$ 1P6M CMOS technology and the recovered data jitter is 14ps in simulation.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.110-113
• /
• 2003

In this paper, the multi-channel high speed data acquisition system is implemented. This high speed signal processing system for 3-D image display is applicable to the manipulation of a medical image processing, multimedia data and various fields of digital image processing. In order to convert the analog signal into digital one, A/D conversion circuit is designed. PCI interface method is designed and implemented, which is capable of transmission a large amount of data to computer. In order to, especially, channel extendibility of images acquisition, bus communication method is selected. By using this bus method, we can interface each module effectively. In this paper, 32-channel A/D conversion and PCI interface system for 3-dimensional and real-time display of the retina image is developed. The 32-channel image acquisition system and high speed data transmission system developed in this paper is applicable to not only medical image processing as 3-D representation of retina image but also various fields of industrial image processing in which the multi-point realtime image acquisition system is needed.

• Journal of the Korean Society for information Management
• /
• v.19 no.4
• /
• pp.113-135
• /
• 2002

An interface or integration among various information system is needed to construct knowledge management infrastructure. Particularly, digital library and knowledge management system have to be implemented in the view of integration for activating interaction of organizational knowledge. So this study conducts comparative analysis between two systems in the perspective of knowledge management key factors, and then explores the ways toward an integration model. The integration model is designed for activating user interface and consistent flow of knowledge. This model is expected to contribute to increase the performance of knowledge management.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.552-560
• /
• 2017

This paper presents a transceiver chipset realized in a $0.13-{\mu}m$ CMOS technology for serial digital interface of video data transmission, which compensates the electrical cable loss of 45 dB in maximum at 1.5 Gbps. For the purpose, the TX equips pre-emphasis in the main driver by utilizing a D-FF with clocks generated from a wide-range tuning PLL. In RX, two-stage continuous-time linear equalizers and a limiting amplifier are exploited as a front-end followed by a 1/8-rate CDR to retime the data with inherent 1:8 demultiplexing function. Measured results demonstrate data recovery from 270 Mbps to 1.5 Gbps. The TX consumes 104 mW from 1.2/3.3-V supplies and occupies the area of $1.485mm^2$, whereas the RX dissipate 133 mW from a 1.2-V supply and occupies the area of $1.44mm^2$.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.10a
• /
• pp.66-67
• /
• 2005

기존의 데스크톱 컴퓨터가 고정된 공간에서만 사용되는데 반해 개인용 정보단말기(PDA)는 이동하면서 사용이 가능하다는 특징 때문에 소형화면과 작은 부피, 가벼운 용량의 특징을 지닌다. 그러나 이러한 제한된 화면에서는 한 번에 볼 수 있는 정보량이 적어 사용자 중심의 PDA용 GUI 아이콘 설계를 위해서는 우선 PC와 PDA간의 호환을 자유롭게 하는 인터페이스 디자인이 선행되어야 한다. 기존 소형화면에서는 한 번에 볼 수 있는 정보량이 적기 때문에 전체에 대한 개관이 불가능했고, 많은 정보를 담으면, 내용이해가 어려웠는데, 본 논문에서는 효율적인 GUI 아이콘 설계를 통해 정보의 ‘집중’과 ‘선택’ 이 가능한 PDA의 인터페이스 디자인을 알아보고자 한다. 대량 정보를 작은 화면에 종합적으로 담아내어 개관을 가능하게 하고, 정보의 내용과 가치를 아이콘의 크기와 색, 수직 혹은 수평적인 움직임 등의 시각화를 통해 차별화시킴으로써 개별 정보내용의 이해를 가능하게 한다. 앞으로 PDA와 PC의 표준화된 호환 가능한 브라우저가 모든 PDA에 기본 인터페이스로 장착된다면, 다른 매체들 간의 데이터 전송 시스템의 호환을 순조롭게 하여 경제적인 파급 효과 뿐만 아니라 차세대 이동통신의 영역까지 확장하여 산업적인 파급효과도 클 것으로 예상된다.

• Korean Journal of Digital Imaging in Medicine
• /
• v.6 no.1
• /
• pp.51-64
• /
• 2003

This thesis describes the effective interfacing methods of PACS Modality based on the system installation andoperating experiences. PACS(Picture Archiving and Communication Systems) is a system for medical image archiving and communication using large storage device and high-speed network. The standard communication protocol of PACS is DICOM(Digital Imaging and Communication in Medicine) based on TCP/IP and point-to-point protocol. However, there are many Non-DICOM Modalities and DICOM Modalities having problems. First, we had interfaced almost modalities. Fuji CR, GE CT, MRI, Angio, Fluoro, Phillips Angio, Shimadzu Fluoro. Ultrasound PACS, with the main PACS in the Seoul S Hospital as large scale hospital. And we manipulated the intelligent image distribution and the CT. MRI Interfaces never experienced beforein the Anyang J Hospital and the Chungju C Hospital as mid or small scale hospital. Technically, we developed both the DICOM Interface and the Non-DICOM Interface. At the last, the DICOM Worklist and the DICOM Print Interface were implemented in the Seoul B Hospital, the Bucheon SJ Hospital and the Seoul K Hospital independently with PACS. The Oracle, Sybase and MS-SQL are used as database, and UNIX, Macintosh, MS Windows as operating systems. And the Visual C++ and UNIX C are the main programming tools. We have used UTP, coaxial and fiber optic cable under 10/100 mbps LAN for networking.

• Korean Journal of Digital Imaging in Medicine
• /
• v.5 no.1
• /
• pp.46-63
• /
• 2002

This thesis describes the effective interfacing methods of PACS Modality based on the system installation and operating experiences. PACS(Picture Archiving and Communication Systems) is a system for medical image archiving and communication using large storage device and high-speed network. The standard communication protocol of PACS is DICOM(Digital Imaging and Communication in Medicine) based on TCP/IP and point-to-point protocol. However, there are many Non-DICOM Modalities and DICOM Modalities having problems. First, we had interfaced almost modalities, Fuji CR, GE CT, MRI, Angio, Fluoro, Phillips Angio, Shimadzu Fluoro, Ultrasound PACS, with the main PACS in the Seoul S Hospital as large scale hospital. And we manipulated the intelligent image distribution and the CT, MRI Interfaces never experienced before in the Anyang J Hospital and the Chungju C Hospital as mid or small scale hospital. Technically, we developed both the DICOM Interface and the Non-DICOM Interface. At the last, the DICOM Worklist and the DICOM Print Interface were implemented in the Seoul B Hospital, the Bucheon SJ Hospital and the Seoul K Hospital independently with PACS. The Oracle, Sybase and MS-SQL are used as database, and UNIX, Macintosh, MS Windows as operating systems. And the Visual C++ and UNIX C are the main programming tools. We have used UTP, coaxial and fiber optic Gable under 10/100 mbps LAN for networking.