• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.43-59
• /
• 2019

The Traffic controller currently used in Korea is a switch control system that directly transfers 220V of high voltage to traffic lights one to one. This method requires a lot of cables, and there are concerns about electric shock. Accordingly, Korea Road Traffic Authority added the digital communication signal controller standard using digital communication method to the standard specification of the communication signal controller of the National Police Agency. Based on these specifications, this paper intended to develop digital communication call controllers. In addition, it was verified that even if the digital communication signal controller and analogue communication call controller were mixed, they could operate in the signal control system currently in operation.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1551-1561
• /
• 2014

Design, Simulation and experimental analysis of closed loop time domain based Discrete PWM buck-boost converter are described. To improve the transient response and dynamic stability of the proposed converter, Discrete PID controller is the most preferable one. Discrete controller does not require any precise analytical model of the system to be controlled. The control system of the converter is designed using digital PWM technique. The proposed controller improves the dynamic performance of the buck-boost converter by achieving a robust output voltage against load disturbances, input voltage variations and changes in circuit components. The converter is designed through simulation using MATLAB/Simulink and performance parameters are also measured. The discrete controller is implemented, and design goal is achieved and the same is verified against theoretical calculation using LabVIEW.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.726-731
• /
• 2004

This paper proposes a pulse-width-modulation (PWM) controller design technique using intelligent digital redesign. Intelligent digital redesign is to convert a well-designed analog fuzzy-model-based controller into an equivalent pulse-amplitude-modulation (PAM) digital controller maintaining the original analog control system in the sense of state-matching. In similar line of conversion concept, the redesigned PAM intelligent digital controller is converted into a PWM controller using the equivalent area principle. To convincingly visualize the proposed technique, an computer simulation example-attitude control of nonlinear artificial satellite system is included.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.285-293
• /
• 1999

In this paper, the novel digital frequency/phase controller, to control the invelter fed traveling wave type ultra-sonic m motor(USM) is proposed. This controller is used to control the drive frequency, phase difference and applied voltages of e each phase of the motor. Proposed digital controller has constructed with digital logic only, no more use digitallongleftarrowanalog h hybrid method of the conventional controller, in order to generate drive frequency and phase difference. Therefore, the c control system has become to velY simple structure. T\rvo types of controllers are designed, one is to control drive f frequency and phase difference, another has added voltage control function of each phase. Two full digital voltage/phase c controllers are implemented by using custom LSI and EPLD, the control pelformance and the simplicity ofthe proposed c controller is verified by expeJimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1283-1288
• /
• 2003

This paper proposes an approach to attitude control artificial satellites with jet-engine. The jet-engine produces on-off thrust, which can be modelled as pulse-width-modulated (PWM) function. Therefore, the problem is converted to design a PWM controller and we develop an efficient technique for this purpose using digital redesign. The digital redesign is a converting technique a well-designed analog controller into the equivalent digital one maintaining the property of the original analog control system in the sense of state-matching. The redesigned digital controller is again converted into PWM controller using the equivalent area principle. We show a computer simulation of the attitude control of artificial satellites.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1289-1294
• /
• 2003

This paper proposes a novel and efficient intelligent digital redesign technique for a Takagi-Sugeno (TS) fuzzy system. The term of intelligent digital redesign involves converting an existing analog fuzzy-model-based controller into an equivalent digital counterpart in the sense of state matching. In this paper, we suggest the discretization method based on the dual-rate sampling approximation is first proposed, and then attempt to globally match the states of the overall closed-loop TS fuzzy system with the pre-designed analog fuzzy-model-based controller and those with the digitally redesigned fuzzy-model-based controller. To show the feasibility and the effectiveness of the proposed method, a computer simulation is provided.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.10
• /
• pp.457-463
• /
• 2001

This paper presents a simple and new digital redesign algorithm for fuzzy-model-based controllers. In the first stage, a continuous-time TS fuzzy model is constructed for a given continuous-time nonlinear system and a corresponding continuous-time fuzzy-model-based controller is established based on the existing controller synthesis algorithms. In the second stage, the continuous-time fuzzy-model-based controller is converted to equivalent discrete-time fuzzy-model-based controller, aiming at maintaining the property of the analogue controlled system, which are called intelligent digital redesign. Finally, the proposed method is applied to the digital control of inverted pendulum system to shows the effectiveness and the effectiveness and the feasibility of the method.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.18-21
• /
• 2017

In this paper we present IoT compliant HD Digital Signage Controller design using Raspberry Pi. Nowadays, the digital signage system have gained increasing popularity and rapidly growing communications medium that offers a wide range of exciting ways with customers, enhance brand awareness, increase sales and margin uplift by replacing the traditional static signage system. This paper presents a cost-effective IoT based HD Digital Signage Controller (DSC) using R-Pi computer that can use various kinds of displays in order to make the system as efficient and affordable as possible to provide advertisement or other relevant information to people in public areas. The system is designed in such way the information about surrounding related place is taken through sensors and directly uploaded to the internet, and thus can be accessed anytime and displayed on screens by using Raspberry Pi that serves as controller in the system. The design and implementation of the system developed by using python programming language and its hardware consists of sensors, Arduino, Raspberry Pi 3 model B board and the displays. The main targets of this study are build a cost effective Digital Signage system as well as broadcasting information at display contents in public areas and control those digital signs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.758-761
• /
• 2004

This paper proposes a design and implementation of multiplierless digital PID (Proportional-Integral-Derivative) controller using FPGA (Field Programmable Gate Array) for controlling the speed of DC motor in digital system. The multiplierless PID structure is based on Distributed Arithmetic (DA). The DA is an efficient way to compute an inner product using partial products, each can be obtained by using look-up table. The PID controller is designed using MATLAB program to generate a set of coefficients associated with a desired controller characteristics. The controller coefficients are then included in VHDL (Very high speed integrated circuit Hardware Description Language) that implements the PID controller onto FPGA. MATLAB program is used to activate the PID controller, calculate and plot the time response of the control system. In addition, the hardware implementation uses VHDL and synthesis using FLEX10K Altera FPGA as target technology and use MAX+plusII program for overall development. Results in design are shown the speed performance and used area of FPGA. Finally, the experimental results can be shown when compared with the simulation results from MATLAB.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.4
• /
• pp.620-630
• /
• 2005

This paper presents a digital controller for a single phase UPS inverter under two main considerations: (i) the overall system shall keep very low AC-voltage tracking error as well as no phase delay over different load conditions, and (ii) the digital controller shall be employed at a fixed sampling time. We propose that the former can be achieved by the proposed controller using the error-state approach and the latter can be dealt with by the socalled characteristics ration assignment.