• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.257-260
• /
• 2005

A general electric acceleration testing method for estimation of chloride diffusion coefficient is RCPT and CTH. Also, this testing methods have merit that reduce the testing time. In this paper, an experimental study is executed to investigate the effect of testing method on coefficient of chloride diffusion and it is compared with RCPT and CTH. According to this experiment results, W/C ratio and testing method influence chloride diffusion coefficient of concrete. As W/C ratio is increased, diffusion coefficient in concrete is also increased. Diffusion coefficient obtained by each testing method show the different values. However, there is no remarkable difference between the two testing method.

• 산업경영시스템학회지
• /
• 제10권16호
• /
• pp.149-158
• /
• 1987

The Adoption/Diffusion of Innovations(New Product), a topic of study and research that has frown rapidly in the past few decades, deals with how a new product is adopted in a society. It is of high importance to marketing organizations because New Products must be brought out continuously in order to service. The purpose of this paper is to examine the Adoption/Diffusion Models for New product which will help to analyze the Adoption/Diffusion process of Adopters. There are a number of models that, with varying degrees of success, have been used to predict market acceptance of new product. In this paper, following types of new product Adoption/Diffusion Models was suggested. (1) Adoption Models : The Alternative Models of Adoption. The Rogers Model of the Innovation Decision Process. (2) Diffusion Models : First Purchase Models(Basic Models, Extension of the Basic Models), Repeat Purchase Models

• 대한기계학회논문집B
• /
• 제21권9호
• /
• pp.1126-1138
• /
• 1997

An axisymmetric laminar jet diffusion flame has been numerically modelled. The present study employs the refined physical submodels to account for the detailed chemical kinetics and the variable transport properties. It is found that preferential diffusion resulting from variable transport properties significantly influences the hydrogen diffusion flame structure in terms of the spatial distribution for temperature, species concentration, thermal and mass diffusivity, Lewis number, and NO concentration. The preferential diffusion effects on the diffusion flame in the high-pressure environment are also discussed in detail.

• Journal of Welding and Joining
• /
• 제15권6호
• /
• pp.32-40
• /
• 1997

Solid state diffusion bonding is the joining process performed by creep and diffusion, which is accelerated by heating below melting temperature and proper pressing, in vacuum or shielding gas atmosphere. By this process we can obtain sufficient joint which can't be expected from the fusion welding. For Ti-6Al-4V alloy, the optimum solid state diffusion bonding condition and mechanical properties of the joint were found, and micro void morphology at bond interface was observed by SEM. The results of tensile test showed sufficient joint, whose mechanical properties are similar to that of base metal. 850$^{\circ}$C, 3MPa is considered as the optimum bonding condition. Void morphology at interface is long and flat at the initial stage. As the percentage of bonded area increases, however, small and round voids are found. Variation of void shape can be explained as follows. As for the void shrinkage mechanism, at the initial stage, power law creep is the dominant, but diffusion mechanism is dominant when the percentage of bonded area is increased.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.200-211
• /
• 1995

This study was designed to evaluate the effects of temperature and humidity on the sampling efficiency of mixed organic vapors of l,2-DCE, benzene, and MIBK by 3 different types of diffusion monitors. Independent variables used for the study were temperatures ($25^{\circ}C$, $35^{\circ}C$), humidities (30%, 80%), and vapor concentrations (low, medium, and high). In addition, vapor concentrations measured by the traditional charcoal tube method were used as reference values and were compared with those of by diffusion monitors. The results were as follows: 1. The desorption efficiencies(DE) of 1,2-DCE and benzene from charcoal tubes and from diffusion monitors ranged from 98% to 105%. In contrast, the DEs of MIBK from charcoal tubes and diffusion monitors except DM1 ranged from 71% to 85%. The DE of MIBK from DM1 was 98%. 2. No statistically significant differences of 1,2-DCE concentrations and the sampling efficiencies regardless of temperatures and humidities studied between charcoal tube and 3 diffusion monitors were found. 3. At 80% humidity, increasing frequencies of 1,2-DCE breakthrough at higher temperature and higher vapor concentration measured by charcoal tubes were observed. 4. No statistically significant difference of benzene concentrations were found between charcoal tube and diffusion monitors except DM3. The sampling efficiencies of DM3 were statistically significantly lower at all experimental conditions except the $35^{\circ}C$ and 30% humidity condition. 5. No statistically significant difference of MIBK concentrations were found between charcoal tube and diffusion monitors except DM3. The sampling efficiencies of DM3 were statistically significantly higher at higher humidity conditions regardless of temperature. Although statistically not significant, sampling efficiency of MIBK showed positive correlation with humidity while negative correlation with concentration was observed. 6. For sampling 1,2-DCE and benzene, no significant variations of concentrations among three diffusion monitors regardless of temperature and humidity conditions were found. For MIBK sampling, however, wide variations with increasing humidity among diffusion monitors were obtained. In conclusion, this study suggests that diffusion monitors will be a reasonables substitute for the traditional charcoal tubes for sampling non-polar organic vapors at temperature and humidity conditions studied. For polar organic vapors, use of an alternative desorption solution other than CS2 is recommended because of its low desorption efficiency. In addition, since variable among diffusion monitors for polar organic vapors particularly at higher humidity conditions were observed, further study is recommended of the effects of humidity on the performance of diffusion monitors.

• 한국전자거래학회지
• /
• 제17권2호
• /
• pp.115-127
• /
• 2012

본 연구에서는 국가 간 이동통신서비스의 확산과정에서 국가 간 영향에 의해 한 국가에서의 확산성과가 다른 국가의 확산에 주는 영향을 분석하였다. 그동안 대부분의 이동통신서비스 확산에 대한 국가 간 비교연구들은 주로 국가별로 추정된 확산과정에 대해 사후적인 비교 분석이 일반적인 것에 반하여, 본 연구에서는 최근의 이동통신서비스의 확산이 국경을 넘어 영향을 미치고 있는 현실을 보다 적절히 설명할 수 있다. 본 연구에서는 이를 위하여 다국가 확산모형을 이용하여 한국과 중국, 미국, 일본, 홍콩 등 5개국에서의 이동통신서비스의 확산 과정을 분석하였다. 분석 결과 중국의 이동통신서비스의 확산은 한국, 미국, 일본, 홍콩 등 주변 국가들에서의 이동통신서비스의 확산에 유의한 영향을 받은 것으로 밝혀졌다.

• Communications for Statistical Applications and Methods
• /
• 제14권2호
• /
• pp.267-280
• /
• 2007

In this paper, we consider the robust estimation for diffusion processes when the sample is observed discretely. As a robust estimator, we consider the minimizing density power divergence estimator (MDPDE) proposed by Basu et al. (1998). It is shown that the MDPDE for diffusion process is weakly consistent. A simulation study demonstrates the robustness of the MDPDE.

• 전기의세계
• /
• 제27권6호
• /
• pp.69-75
• /
• 1978

Diffusion processes of boron, phosphorus, and arsenic into silicon have been investigated using a new diffusion source called "spin-on source". Diffusion coefficients of these impurities have been calculated from the experimental results and are compared with the published values. Reasonable agreements have been found between the calculated and the published values. From this study, it is concluded that the spin-on source can be used as the diffusion source for integrated circuit fabricaticon.ricaticon.

• 콘크리트학회논문집
• /
• 제24권6호
• /
• pp.715-726
• /
• 2012

콘크리트의 대표적 물성치인 강도 및 염화물 확산계수는 재령에 따라 변화하며, 염화물 침투 해석시 이러한 영향들이 고려되고 있다. 이 연구는 다양한 혼화재료 (고로슬래그 미분말, 플라이애쉬, 실리카 퓸)을 포함하는 고성능콘크리트의 촉진염화물 확산계수, 겉보기 염화물 확산계수, 강도 특성을 재령에 따라 실험적으로 도출하고 그 상관성을 분석하는데 목적이 있다. 이를 위해 30개의 배합을 가지는 고성능 콘크리트가 제작되었고, 재령 28일, 91일, 180일, 270일에 대한 촉진확산계수를 실험적으로 도출하였으며, 또한 동일배합에 대하여 침지 6개월 이후의 겉보기 확산계수가 도출되었다. 재령에 대한 강도 특성을 평가하기 위해, 재령 7일, 28일, 91일, 180일에 대한 강도시험이 수행되었다. 시간 의존적인 촉진확산계수의 변화가 겉보기 확산계수 및 강도와 비교되었으며, 각각의 상관관계가 재령에 대하여 분석되었다. 이 연구를 통하여 겉보기 확산계수와 촉진확산계수는 재령에 큰 영향을 받지 않으면서 선형적인 상관성이 도출되었다. 또한 강도와 촉진확산계수 그리고 강도와 겉보기 확산계수에서도 재령에 큰 영향을 받지 않는 선형적인 관계가 도출되었다.

• 한국컴퓨터정보학회논문지
• /
• 제15권11호
• /
• pp.173-183
• /
• 2010

본 연구의 목적은 RFID의 확산에 영향을 미치는 요인을 분석하는 것이다. 연구의 목적을 달성하기 위해서 혁신 확산이론과 RFID에 대한 이론적 배경을 바탕으로 연구모형과 가설을 설정하였다. 본 연구에서 제안된 연구모형은 RFID를 도입한 73개 기업을 대상으로 Smart PLS 2.0 통계패키지를 이용하여 분석하였다. 분석결과, 표준화, 정보시스템 하부구조는 RFID 통합에 정(+)의 영향을 미치는 것으로 나타났고, 지각된 이점, 조직간 협업, 경쟁적 압력은 RFID 사용에 정(+)의 영향을 미치는 것으로 나타났다. 그리고 RFID 통합은 RFID 사용에 정(+)의 영향을 미치는 것으로 나타났다. 본 연구의 결과는 RFID의 확산에 관한 다양한 시사점을 제공할 것이다.