• Journal of the Korean institute of surface engineering
• /
• v.43 no.5
• /
• pp.238-242
• /
• 2010

In the present work, the influence of oxide on the Cr-Si-N coatings was investigated for the Cr-Si-O-N coatings on AISI 304 and Si wafer deposited by hybrid system, which combines the DC magnetron sputtering technique and arc ion plating (AIP) using Cr and Si target in an $Ar/N_2/O_2$ gaseous mixture. As the O content in the Cr-Si-N coatings increased, the diffraction patterns of the Cr-Si-O-N coatings showed CrN and $Cr_2O_3$ phases. However, as the O content increased to 28.8 at.%, diffraction peak of $Cr_2O_3$ was disappeared in the Cr-Si-O-N coating. The $d_{200}$ value was decreased with increasing of O content. The average grain size increased from about 40 nm to 65 nm as the O content increased. The maximum micro-hardness of the Cr-Si-O-N coating was obtained 4507 Hk at the O content of 24.8 at.%. The average friction coefficient of the Cr-Si-O-N coatings was gradually decreased by increasing the O content and the average friction coefficient decreased from 0.37 to 0.25 by increasing the O content. These results indicated that amorphous phase was increased in the Cr-Si-O-N coatings by increasing of O content.

• Journal of the Korean Electrochemical Society
• /
• v.20 no.3
• /
• pp.55-59
• /
• 2017

In this study, thermoelectric characteristics of perovskite $La_{0.5}Ca_{0.5}MnO_3$ (LCMO) nanomaterials were investigated by theoretical simulation and experimental analysis. Thermoelectric power factors calculated by DFT simulation were gradually enhanced as increase in annealing temperature. Maximum power factor was obtained with high magnitude of $S^2{\sigma}=566{\mu}W/m{\cdot}K^2$ at 1100 K through a dominant improvement of Seebeck coefficient compared with electrical conductivity. Experimentally, the LCMO nanomaterials were hydrothermally synthesized and then treated by post thermal annealing with temperature variation. X-ray diffraction and SEM analysis illustrated that LCMO exhibited orthorhombic perovskite structures with small grain size of 16~19 nm over 873 K. The results directly confirmed that improvement of crystallinity and decrease of mean grain size given by post thermal annealing lead to enhancements of electrical conductivity and Seebeck coefficient, respectively.

• Journal of Integrative Natural Science
• /
• v.6 no.4
• /
• pp.193-196
• /
• 2013

Haemoglobin is an interesting physiologically significant protein composed of specific functional prosthetic haem and globin moieties. In recent decades, there has been substantial interest in attempting to understand the structural basis and functional diversity of avian haemoglobins (Hbs). Towards this end, purification, crystallization, preliminary X-ray diffraction and molecular-replacement studies have been carried out on Amaurornis phoenicurus Hb. Crystals were grown by the hanging drop vapor-diffusion method using PEG 2000 and NaCl as precipitants. The crystals belonged to the primitive monoclinic system $P2_1$, with unit-cell parameters $a=65.33{\AA}$, $b=93.14{\AA}$, $c=98.54{\AA}$, ${\beta}=100.48^{\circ}$; a complete data set was collected to a resolution of $2.6{\AA}$. The Matthews coefficient of $2.30{\AA}^3Da^{-1}$ for the crystal indicated the presence of two ${\alpha}_2{\beta}_2$ tetramers in the asymmetric unit.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1157-1161
• /
• 2007

A construction noise is the main reason for people's petition among the pollution. The purpose of this study is to develop the noise prediction program to see the level of the noise on the construction site more accurately. For this purpose, the database of the power level on the various equipments was made. The noise reduction by distance and the noise reduction by diffraction of barrier were mainly considered and calculated. The simple noise prediction program will provide the information about proper height and length of the potable barrier which satisfies noise criteria of the construction sites from a construction planning stage. To investigate the reliability of this program, the predicted data was compared with the measured data. An average of difference between measured data and predicted data is 1.3 dB(A) and a coefficient of correlation is about 0.95.

• Journal of the Korean Ceramic Society
• /
• v.30 no.2
• /
• pp.107-114
• /
• 1993

Zinc-Borosilicate(ZnO 65.0wt%, B2O3 21.5wt%, SiO2 9.0wt%, PbO or tiO2 4wt%) passivation glasses were studied using differential thermal analysis(DTA), scanning electron microscopy(SEM) observations, X-ray diffraction (XRD) patterns and measurement of thermal expansion coefficients. Passivation glasses containing 4wt% TiO2 and 4wt% PbO had crystallization temperature of 680~73$0^{\circ}C$ and major crystalline phases were identified by X-ray diffraction as $\alpha$-ZnO.B2O3 and $\alpha$-5ZnO.2B2O3. As increasing firing temperature, the size of crystalline phases increased by observation of SEM. The thermal expansion coefficient of crystallized glass frits was smaller than that of unfired glass.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.28-38
• /
• 1987

Experimental studies are conducted for the wave forces acting on the vertically mounted circular piles in the waves. Two-three-cylinder arrays are equally spaced and the spacings(S/D) as well as the incident angles of various waves are changed to study their separate effects on the wave forces. The numerical results based on the diffraction theory are in good agreement with the experimental results, and the diffraction theory well predicts the trend of the wave forces when the spacings and the incident angles are changed.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.784-792
• /
• 2018

In this letter, a standard deviation based optimization technique has been applied on High Resolution X-ray Diffraction symmetric and asymmetric scan results to accurately determine the Aluminum molar fraction and lattice relaxation of Molecular Beam Epitaxy grown compositionally graded Aluminum Gallium Nitride (AlGaN)/Aluminum Nitride/Gallium Nitride (GaN) heterostructures. Mathews-Blakeslee critical thickness model has been applied in an alternative way to determine the partially relaxed AlGaN epilayer thicknesses. The coupling coefficient determination has been presented in a different perspective involving sample tilt method by off set between the asymmetric planes of GaN and AlGaN. Sample tilt is further increased to determine mosaic tilt ranging between $0.01^{\circ}$ and $0.1^{\circ}$.

• Applied Microscopy
• /
• v.51
• /
• pp.10.1-10.9
• /
• 2021

We investigate the sensitivity of symmetry quantification algorithms based on the profile R-factor (R_p) and the normalized cross-correlation (NCC) coefficient (γ). A DM (Digital Micrograph^©) script embedded in the Gatan digital microscopy software is used to develop the symmetry quantification program. Using the Bloch method, a variety of CBED patterns are simulated and used to investigate the sensitivity of symmetry quantification algorithms. The quantification results show that two symmetry quantification coefficients are significantly sensitive to structural changes even for small strain values of < 1%.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.5
• /
• pp.319-328
• /
• 2000

Silver is known to have such characteristics as low shear strength, good transfer-film forming tendency, and good corrosion resistance. Silver thin films have been prepared by ion plating of physical vapour deposition (PVD) using both argon gas pressure and bias voltage of processing condition. After the silver films were prepared, the properties in them were examined by gas pressure and bias voltage of substrate. Their morphology and crystal orientation were investigated by scanning electron microscopy (SEM) and X-ray diffractor. The properties of film were, also, studied to relate with morphology, X-ray diffraction pattern, and friction coefficient at vacuum ambient. The friction coefficient was stabilized remarkably on deposited films with increasing argon pressure for deposition. Also, the effect of increasing of the bias voltage for deposition resulted in lower friction coefficient and stability in $1.7$\times$10^{-4}$ torr. On the contrary, behavior of friction coefficient was stabilized on deposited films with decreasing the bias voltage in $1.7$\times$10^{-5}$ torr for deposition.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.2111-2111
• /
• 2001

A chemoinfometrical method for evaluating the quantitative determination of crystallinity one polymorphs based on fourie-transformed near-infrared (FT-NIR) spectroscopy was established. A direct comparison of the data with the ones collected from using the and compared with the conventional powder X-ray diffraction method was performed. [Method] The pPure a and g forms of indomethacin (IMC) were prepared by reportedusing published methods. Six kinds of standard samples obtained by physically mixing of a and g forms. After the powder X-ray diffraction profiles of samples have been measured, the intensity values were normalized to against the intensity of silicon powder as the as an external standard. The calibration curves for quantification of crystal content were based upon the total relative intensity of four diffraction peaks from of the form g crystal. FT-NIR spectra of six calibration sample sets were recorded 5 times with the NIR spectrometer (BRAN+LUEBBE). Chemoinfometric analysis was performed on the NIR spectral data sets by applying the principal component regression (PCR). [Results] The relation between the actual and predicted polymorphic contents of form g IMC measured using by the X-ray diffraction method shows a good straight linen linear relation., and it has slope of 0.023, an intercept of 0.131 and a correlation coefficient of 0.986. PCR analyses wereis was performed based on normalized NIR spectra sets offer standard samples of known content of IMC g form. IMC. A calibration equation was determined to minimize the root mean square error of the predictionthe prediction. Figure 1 shows a plot of the calibration data obtained by NIR method between the actual and predicted contents of form g IMC. The predicted values were reproducible and had a smaller standard deviation. Figure 2 shows that the plot for the predicted transformation rate (%) of form a IMC to form g as measured by X-ray diffractomeoy against to those as measured by NIR method. The plot has a slope of 1.296, an intercept of 1,109, and a correlation coefficient of 0.992. The line represents a satisfactory correlation between the two predicted values of form g IMC content. Thus NIR spectroscopy is an effective method for the evaluation to the pharmaceutical products of quantitative of polymorph.