• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.460-467
• /
• 2012

When recycled aggregate with old mortar and particles is used in concrete mixing, such aggregates can affect hydration reaction by promoting or inhibiting it. In this study, the possibility of hydration reaction on old mortar and particle was analyzed. Hydration reaction was carried out in old mortar that is finely crushed by an impact machine in the production of recycled aggregates, and it was found that this did have an impact on the strength development of concrete. Unlike in old cement, the hydration reaction did not progress in the particles, and it had high amounts of silica powder and calcium carbonate. In conclusion, the old mortar can have the influence of improving compressive strength, but the particles can delay the setting time of recycled aggregate concrete.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1199-1203
• /
• 1997

The investigation of cure kinetics of biphenyl epoxy (4,4-diglycidyloxy-3,3,5,5-tetramethyl biphenyl)-xylok resin system with four different catalysts was performed by differential scanning calorimeter using an isothermal approach. All kinetic parameters of the curing reaction including the reaction order, activation energy and rate constant were calculated and reported. The results indicate that the curing reaction of the formulations using triphenylphosphine (TPP) and 1-benzyl-2-methylimidazole (1B2MI) as a catalyst proceeds through a first order kinetic mechanism, whereas that of the formulations using diazabicyloundecene (DBU) and tetraphenyl phosphonium tetraphenyl borate (TPP-TPB) proceeds by an autocatalytic kinetic mechanism. To describe the cure reaction in the latter stage, we have used the semiempirical relationship proposed by Chern and Poehlein. By combining an nth order kinetic model or an autocatalytic model with a diffusion factor, it is possible to predict the cure kinetics of each catalytic system over the whole range of conversion.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.652-665
• /
• 2019

Analytical solutions of the reactant concentration inside porous spherical catalytic particles were obtained from unsteady reaction-diffusion equation by applying eigenfunction expansion method. Various surface concentrations as exponentially decaying or oscillating function were considered as boundary conditions to solve the unsteady partial differential equation as a function of radial distance and time. Dirac delta function was also used for the instantaneous injection of the reactant as the surface boundary condition to calculate average reactant concentration inside the particles as a function of time by Laplace transform. Besides spherical morphology, other geometries of particles, such as cylinder or slab, were considered to obtain the solution of the reaction-diffusion equation, and the results were compared with the solution in spherical coordinate. The concentration inside the particles based on calculation was compared with the bulk concentration of the reactant molecules measured by photocatalytic decomposition as a function of time.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3397-3406
• /
• 2012

Three types of spherulitic morphologies have been investigated in dual substrate mode of Belousov-Zhabotinsky (BZ) type reaction system. Prior to growth of spherulites, three distinct patterning behaviors have been observed sequentially during the reaction process. Initial and the early-phase of reaction showed the emergence of concentric ring-like wave patterns. A colloidal-state of reaction consists of numerous fine solid particles, which forms primarily some nucleation centers of dendritic characters. The nucleation centers were found to grow in sizes and shapes with the progress of reaction. It leads to growth of dendritic-like spherulitic crystal patterns. The resultant spherulites showed transitions in their morphologies, including sea-weeds and rhythmic spherulitic crystal patterns, by the effects substituted organic substrate and in the higher concentration of bromate-initiator respectively. The branching mechanism and crystal ordering of spherulitic textures were studied with help of optical microscope (OPM) and scanning electron microscope (SEM). Characteristics of crystal phases were also evaluated using X-ray diffraction (XRD) and differential thermal analysis (DTA). Results indicated that the compositions of reactants and crystal orderings were interrelated with morphological transitions of spherulites as illustrated and described.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.110-122
• /
• 2012

This study investigated the effects of layered clay on the thermal curing behavior and tensile properties of resole phenol-formaldehyde (PF) resin/clay/cellulose nanocomposites. The thermal curing behavior of the nanocomposite was characterized using conventional differential scanning calorimetry (DSC) and temperature modulated (TMDSC). The addition of clay was found to accelerate resin curing, as measured by peak temperature ($T_p$) and heat of reaction (${\Delta}H$) of the nanocomposite’ curing reaction increasing clay addition decreased $T_p$ with a minimum at 3~5% clay. However, the reversing heat flow and heat capacity showed that the clay addition up to 3% delayed the vitrification process of the resole PF resin in the nanocomposite, indicating an inhibition effect of the clay on curing in the later stages of the reaction. Three different methods were employed to determineactivation energies for the curing reaction of the nanocomposite. Both the Ozawa and Kissinger methods showed the lowest activation energy (E) at 3% clay content. Using the isoconversional method, the activation energy ($E_{\alpha}$) as a function of the degree of conversion was measured and showed that as the degree of cure increased, the $E_{\alpha}$ showed a gradual decrease, and gave the lowest value at 3% nanoclay. The addition of clay improved the tensile strengths of the nanocomposites, although a slight decrease in the elongation at break was observed as the clay content increased. These results demonstrated that the addition of clay to resole PF resins accelerate the curing behavior of the nanocomposites with an optimum level of 3% clay based on the balance between the cure kinetics and tensile properties.

• 폴리머
• /
• 제24권1호
• /
• pp.105-112
• /
• 2000

본 연구에서는 항공기 구조용 재료로 쓰이는 탄소섬유/에폭시 복합재료 프리프레그(DMS 2224)를 모델시스템으로 하여 등온환경과 등속도 가열환경에서 경화반응 속도를 연구하였다. 이 복합재료의 공정온도에서의 가공공정을 묘사할 수 있는 현상학적인 반응속도 모델을 differential scanning calorimetry (DSC)와 이론을 통하여 제안하였다. 등온환경에서의 실험으로부터 반응특성곡선을 관찰한 결과 경화반응이 1차 반응함수임을 확인하였고, 활성화 에너지는 78.43 kJ/mo1을 얻었다. 이 프리프레그는 경화온도에 따라 한계경화도를 보여주어 유리화가 존재함을 확인하였고 이를 1차 반응속도 모델에 적용시킨 결과, 유리화 이후의 확산우세현상을 포함한 반응속도 모델을 제안하였다. 제안된 모델식을 이용하여 등온/등속도 가열환경을 포함한 실제 경화공정을 성공적으로 표현할 수 있었다.

• 대한화학회지
• /
• 제37권11호
• /
• pp.974-977
• /
• 1993

• 대한수의학회지
• /
• 제43권2호
• /
• pp.231-237
• /
• 2003

Listeria (L.) monocytogenes in samples could not be detected occasioally by faster growth of other Listeria spp. especially L. innocua. The aim of this study was to develop the differential media and multiplex polymerase chain reaction (PCR) assays for the rapid detection of L. monocytogenes. L. monocytogenes colonies were characterized by their ${\beta}$-hemolysis with fluorescence under 366 nm UV light on the Listeria hemolysis agar (LHA). L. innocua, a species commonly present in foods, did not produce ${\beta}$-hemolysis on LHA. Therefore, one or more colonies of L. monocytogenes were easily distinguished from large populations of L. innocua. The multiplex PCR assays were developed to distinguish from L. monocytogenes and other Listeria spp. with two pairs of primers. The primers were designed in 16S rRNA and listeriolysin O gene for specific amplification of all members of the genus Listeria and L. monocytogenes, respectively. The multiplex PCR assays produced 560 and 938 bp products in L. monocytogenes; only 938 bp products in the genus Listeria. The multiplex PCR assays could detect as little as 50 pg of L monocytogenes DNA. These results indicated that the differential media and multiplex PCR assays might be useful diagnostic tools for the rapid detection of L. monocytogenes.

• BMB Reports
• /
• 제30권4호
• /
• pp.292-295
• /
• 1997

Exposure of seedling of rice (Oriza sativa cv.Dongin) to cold stress ($6^{circ}C$, 7day) induced differential gene expression. Differentially expressed polyadenylated RNA induced by low temperature were isolated and identified from the leaves of rice (Oriza sativa cv.Dongin) seedling by using the technique, differential display of reverse transcription through polymerase chain reaction (DDRT-PCR). Four bands of cDNAs were differentially displayed on the PAGE gel through DDRT-PCR, and among them three bands were those of overexpressed genes while one band was of an underexpressed gene One of the overexpressed cDNA was characterized. The size of the DDRT-PCR product was found to be about 200 bp. The sequence of the cloned DNA was compared with those of GenBank through a BLAST E-Mail server, and it was found to have no homologies in the nucleotide sequence with that of any known DNA: therefore, it was designated as RC101 The expression of the cold-stress induced-gene, RC101, was sustained with Northern Blot analysis by using the cloned DDRT-PCR product as a probe.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4210-4214
• /
• 2011

Quasiclassical trajectory (QCT) calculations of Ne + ${H_2}^+$ reaction have been carried out on the adiabatic potential energy surface of the ground state $1^2$ A'. The reaction probability of the title reaction for J = 0 has been calculated, and the QCT result is consistent with the previous quantum mechanical wave packet result. Quasiclassical trajectory calculations of the four polarization-dependent differential cross sections have been carried out in the center of mass (CM) frame. The P(${\theta}_r$), P(${\phi}_r$) and P(${\theta}_r$, ${\phi}_r$) distributions, the k-k'-j' correlation and the angular distribution of product rotational vectors are presented in the form of polar plots. Due to the well in $1^2$ A' PES, the reagent vibrational excitation has greater influence on the polarization of the product rotational angular momentum vectors j' than the collision energy.