• 한국분말재료학회지
• /
• 제8권1호
• /
• pp.42-49
• /
• 2001

Ti-50Ni(at%) and Ti-40Ni-10Cu(at%) alloy powders have been fabricated by ball milling method, and their microstructure and phase transformation behavior were investigated by means of scanning electron microscopy/energy dispersive spectrometry, differential scanning calorimetry (DSC), X-ray diffractions and transmission electron microscopy. In order to investigate the effect of ball milling conditions on transformation behavior, ball milling speed and time were varied. Ti-50Ni alloy powders fabricated with the milling speed more than 250 rpm were amorphous, while those done with the milling speed of 100rpm were crystalline. In contrast to Ti-50Ni alloy powders, Ti-40Ni-10Cu alloy powders were crystalline, irrespective of ball milling conditions. DSC peaks corresponding to martensitic transformation were almost discernable in alloy powders fabricated with the milling speed more than 250 rpm, while those were seen clearly in alloy powders fabricated with the milling speed of 100 rpm. This was attributed to the fact that a strain energy introduced during ball milling suppressed martensitic transformation.

• 한국정밀공학회지
• /
• 제8권2호
• /
• pp.47-56
• /
• 1991

The specifications needed for the mobile cranes are summarized as the following : 1) there may be not occured the oscillation of the cargo at unloading point. 2)the required time from departure point to destination point may be as short as possible. 3) there may be not a collapse of cargo caused by the oscillation in the course that the crago is mobilling. In this paper, the linear fractional transformation method is adopted as a method in order to improve the above mentioned problems. A design method of servo system is developed by modifying Davison's method for the case that the homogeneous differential equations of reference input and disturbance are different types. The real time control of a mobile crane system is implemented by 16bits microcomputer with A/D and D/A converters to illustrate the application of the adopted method. The experimental results for the three types of the design methods; linear fractional transformation method, servo system design method and optimal control method are shown for the comparison.

• 한국컴퓨터산업학회논문지
• /
• 제8권3호
• /
• pp.155-166
• /
• 2007

본 연구에서는 얼굴 영상을 캡쳐하여 전 처리한 후 얼굴영역을 분리하고, 분리된 얼굴 영역에서 미분 연산자와 최소 형태를 세선화하여 특징을 추출하였다. Hough Transform은 $r-\theta$ 평면에서 직선의 기울기와 절편으로 변환되며, 반면 Housdorff distance는 세선화된 영상에서 선분을 추출하여 길이, 회전, 천이 특징을 추출하였다. 사람마다 다른 특징들을 추출하여 Housdorff distance과 Hough Transform에 관하여 비교분석 결과 Hough변환의 복잡도가 더 적은 것으로 판단되었다. 인식율은 Housdorff Distance를 이용한 인식율이 Hough Transformation에 비해 조금 높게 나타났다.

• 전자공학회논문지SC
• /
• 제40권3호
• /
• pp.117-126
• /
• 2003

본 연구에서는 월쉬함수를 이용하여 샘플링 구간내에서 데이터를 처리할 수 있는 온라인 월쉬변환과 샘플링 구간내에서 미분 방정식을 계산할 수 있는 새로운 온라인 월쉬함수 미분연산법을 제안하였다. 스케일링 인자의 도입과 다음구간에서의 초기조건을 계산하여 줌으로써 임의의 샘플링 시간을 취할 수 있게 하였으며 제안된 월쉬함수 온라인 알고리즘을 이용하여 기존의 직교함수가 가지는 최종시간까지의 신호를 모두 알고 있어야 그 적용이 가능하다는 단점을 제거하였다. 유사변환법을 이용하여 유도된 동적 시스템에 대한 Luenberger관측기를 월쉬함수를 이용하여 새롭게 변환함으로써 관측기에 포함된 출력의 미분항을 없애기 위한 불필요한 관측기 방정식의 분할을 피하였으며 대수적으로 상태 및 미지입력을 추정하였다. 제안된 방법을 이용하면 실시간 처리를 요하는 시스템에 유용하게 적용될 것으로 기대된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권1호
• /
• pp.435-451
• /
• 2019

Impossible differential cryptanalysis is an essential cryptanalytic technique and its key point is whether there is an impossible differential path. The main factor of influencing impossible differential cryptanalysis is the length of the rounds of the impossible differential trail because the attack will be more close to the real encryption algorithm with the number becoming longer. We provide the upper bound of the longest impossible differential trails of several important block ciphers. We first analyse the national standard of the Russian Federation in 2015, Kuznyechik, which utilizes the 16-byte LFSR to achieve the linear transformation. We conclude that there is no any 3-round impossible differential trail of the Kuznyechik without the consideration of the specific S-boxes. Then we ascertain the longest impossible differential paths of several other important block ciphers by using the matrix method which can be extended to many other block ciphers. As a result, we show that, unless considering the details of the S-boxes, there is no any more than or equal to 5-round, 7-round and 9-round impossible differential paths for KLEIN, Midori64 and MIBS respectively.

• Structural Engineering and Mechanics
• /
• 제12권1호
• /
• pp.85-100
• /
• 2001

In this paper, an analytical procedure for solving several static and dynamic problems of non-uniform beams is proposed. It is shown that the governing differential equations for several stability, free vibration and static problems of non-uniform beams can be written in the from of a unified self-conjugate differential equation of the second-order. There are two functions in the unified equation, unlike most previous researches dealing with this problem, one of the functions is selected as an arbitrary expression in this paper, while the other one is expressed as a functional relation with the arbitrary function. Using appropriate functional transformation, the self-conjugate equation is reduced to Bessel's equation or to other solvable ordinary differential equations for several cases that are important in engineering practice. Thus, classes of exact solutions of the self-conjugate equation for several static and dynamic problems are derived. Numerical examples demonstrate that the results calculated by the proposed method and solutions are in good agreement with the corresponding experimental data, and the proposed procedure is a simple, efficient and exact method.

• 대한원격탐사학회지
• /
• 제7권1호
• /
• pp.29-43
• /
• 1991

The study was performed to extraction the ground water potential area using LANDSAT TM data. The image processing techniques developed for the study are contrast transformation, differential filtering and pseudo stereoscopic image methods. These were examined for lineament extraction, lineament interpretation and the integration of vertor data with LANDSAT data. The differential filtering method is much usefull for lineament extraction, and all direction lineaments are clearly shown on the band 5 image of LANDSAT TM. The pseudo stereoscopic image are made in which color differential method is adopted, the pair images are usefull for the lineament interpretation. The results of the analysis are as follows. 1) there is a close correlation between lineament and cased well in the study area, because 33 wells of the developed 45 cased wells coincide with the lineaments. 2) 21 sites in the study area were selected for pumping test, and as a result 11 sites of them produces over than 200 ton/day.

• 물과 미래
• /
• 제22권2호
• /
• pp.233-239
• /
• 1989

부정류지하수 흐름에 대한 편미분방정식 Blotzmann 변환을 통하여 상미분방정식으로 변환되었으며 유한차분법을 이용하여 수치해를 구하였다. Richardson법과 차분식을 이용하여 미지초기수면구배(missing intial slope)를 구하는 새로운 방법이 제안되었다. 본 연구에서 제안된 방법으로 초기수면구배를 구하였으며 이 값들은 다른 연구결과와 비교한 바 아주 좋은 일치를 보여주었으며 또한 이 방법이 해를 구하는데 간편하고 쉬운 방법임을 보여주었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.651-656
• /
• 2004

This paper presents the application of Differential Transformation to the bucking load and the vibration problem of the rectangular plate loaded by varying in-plane stress. Numerical calculations are carried out and compared with previously published results to validate the results of the resent method. The results obtained by this method agree well with those reported in the Devious works. The results obtained by the present method are presented for various non-uniform loads.

• Advances in nano research
• /
• 제8권2호
• /
• pp.169-182
• /
• 2020

This study presents the hygro-thermo-electromagnetic mechanical vibration attributes of elastically restrained piezoelectric nanobeam considering effects of beam surface for various elastic non-ideal boundary conditions. The nonlocal Eringen theory besides the surface effects containing surface stress, surface elasticity and surface density are employed to incorporate size-dependent effects in the whole of the model and the corresponding governing equations are derived using Hamilton principle. The natural frequencies are derived with the help of differential transformation method (DTM) as a semi-analytical-numerical method. Some validations are presented between differential transform method results and peer-reviewed literature to show the accuracy and the convergence of this method. Finally, the effects of spring constants, changing nonlocal parameter, imposed electric potential, temperature rise, magnetic potential and moisture concentration are explored. These results can be beneficial to design nanostructures in diverse environments.