• Korean Journal of Organic Agriculture
• /
• v.26 no.4
• /
• pp.677-686
• /
• 2018

This study was carried out to determine the effect of Kluyvera sp. CL-2 (KACC 91283P) on the growth of watermelon (Citrullus vulgaris L.). The study consisted of three treatments, no treatment (NT), twice application of Kluyvera sp. CL-2 before transplanting (KC1), and five times application around transplanting (KC2). We determined the chemical properties of soil before and after the treatments, and compared the growth characteristics of watermelon among treatments. The treatment of Kluyvera sp. CL-2 at $1.0{\times}10^6cfu\;mL^{-1}$ significantly increased available $P_2O_5$. The organic matter showed to increase for all treatments, while soil pH, exchangeable Ca and Mg tended to decrease for all treatments. The leaf width was increased by 11.6% for KC1 and 26.2% for KC2 compared to NT. But there were no significant differences in yield, leaf length, fruit weight, fruit length, fruit width, and pericarp thickness among treatments. The contents of free sugars such as fructose and glucose were increased by microbial treatments but sucrose was not different from NT. The content of glucose in watermelon was increased by 13.8% in KC1 and 12.8% in KC2 compared to NT. The content of fructose increased by 14.6% in KC1 and by 39.8% in KC2 compared to NT. The results from the study imply that Kluyvera sp. CL-2 can be used to increase sugar content in watermelon.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.208-227
• /
• 2013

Twenty-seven bronze bowls excavated from the Goryo burial complex at Deobu-gol were examined for their microstructure and chemical composition to characterize the bronze technology practiced by commoners at the time. Results showed that the objects examined can be classified into four groups: 1) objects forged out of Cu-near 22%Sn alloys and then quenched; 2) objects cast from Cu-below 10% Sn alloys containing lead; 3) objects cast from Cu-10%~20% Sn alloys containing lead and then quenched; 4) objects forged out of Cu-10~20% Sn alloys containing lead and then quenched. This study revealed that the fabrication technique as determined by alloy compositions plays an important role in bronze technology. The use of lead was clearly associated with the selection of quenching temperatures, the character of inclusions and the color characteristics of bronze surfaces. It was found that the objects containing lead were quenched at temperatures of $520^{\circ}{\sim}586^{\circ}C$ while those without lead were quenched at the range of $586^{\circ}{\sim}799^{\circ}C$. The presence of selenium in impurity inclusions was detected only in alloys containing lead, suggesting that the raw materials, Cu and Sn, used in making the lead-free alloys for the first group were carefully selected from those smelted using ores without lead contamination. Furthermore, the addition of lead was found to have significant effects on the color characteristics of the surface of bronze alloys when they are subjected to corrosion during interment. In leaded alloys, corrosion turns the surface light green or dark green while in unleaded alloys, corrosion turns the surface dark brown or black. It was found that in fabrication, the wall thickness of the bronze bowls varies depending on the application of quenching; most of the quenched objects have walls 1mm thick or below while those without quenching have walls 1mm thick or above. Fabrication techniques in bronze making usually reflect social environments of a community. It is likely that in the late Goryo period, experiencing lack of skilled bronze workers, the increased demand for bronze was met in two ways; by the use of chief lead instead of expensive tin and by the use of casting suitable for mass production. The above results show that the Goryo bronze workers tried to overcome such a resource-limited environment through technological innovations as apparent in the use of varying fabrication techniques for different alloys. Recently, numerous bronze objects are excavated and available for investigation. This study shows that with the use of proper analytical techniques they can serve as a valuable source of information required for the characterization of the associated technology as well as the social environment leading to the establishment of such technology.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.211-218
• /
• 2019

Purpose: The purpose of the present study was to compare the accuracy of four different metal copings fabricated by CAD/CAM technology and to evaluate clinical effectiveness. Materials and methods: Composite resin tooth of the maxillary central incisor was prepared for a metal ceramic crown and duplicated metal die was fabricated. Then scan the metal die for 12 times to obtain STL files using a confocal microscopy type oral scanner. Metal copings with a thickness of 0.5 mm and a cement space of $50{\mu}m$ were designed on a CAD program. The Co-Cr metal copings were fabricated by the following four methods: Wax pattern milling & Casting (WM), Resin pattern 3D Printing & casting (RP), Milling & Sintering (MS), Selective laser melting (SLM). Silicone replica technique was used to measure marginal and internal discrepancies. The data was statistically analyzed with One-way analysis of variance and appropriate post hoc test (Scheffe test) (${\alpha}=.05$). Results: Mean marginal discrepancy was significantly smaller in the Group WM ($27.66{\pm}9.85{\mu}m$) and Group MS ($28.88{\pm}10.13{\mu}m$) than in the Group RP ($38.09{\pm}11.14{\mu}m$). Mean cervical discrepancy was significantly smaller in the Group MS than in the Group RP. Mean axial discrepancy was significantly smaller in the Group WM and Group MS then in the Group RP and Group SLM. Mean incisal discrepancies was significantly smaller in the Group RP than in all other groups. Conclusion: The marginal and axial discrepancies of the Co-Cr coping fabricated by the Wax pattern milling and Milling/Sintering method were better than those of the other groups. The marginal, cervical and axial fit of Co-Cr copings in all groups are within a clinically acceptable range.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.170-187
• /
• 2020

Dolmens bearing the burial layout and stone coffin tombs of the late Bronze Age were excavated from Samdeok-ri, Goseong, Gyeonsangnsamdo, and grave items such as red-burnished pottery, arrowheads, and stone swords were also discovered. In the case of the red-burnished pottery that was found, it retains a pigment layer with a thickness of about 50 to 160㎛, but with most of the other items, exfoliation and peeling-off of pigment layers can be observed on the surface. The raw materials of the red-burnished pottery contained moderately sorted minerals such as quartz, feldspar, and hornblende, and partly opaque iron oxide minerals were also identified. In particular, the raw materials of the red-burnished pottery from stone coffin tomb #6 were different from those of the other pottery, containing large amounts of hornblende and feldspar. The pottery's red pigment was identified as hematite and showed similar mineral content of raw materials such as fine grained quartz, feldspar, and hornblende. The firing temperature is estimated to have been approximately 900℃, based on their mineral phase. The possibility exists that the raw materials had been collected from the Samdeok-ri area, because diorite and granite diorite with dominant feldspar and hornblende have been identified within 3km of that area. During the pottery manufacturing process, it is estimated that the pigment was painted on the entire surface of the red-burnished pottery after it had been molded and then finished using the abrasion technique. In other words, the red-burnished pottery was made by the process of vessel forming - semi drying - coloring - polishing. The surface and cross-section of the pottery appears differently depending on the concentration of the pigment and the coloring method used after vessels were formed. Most of the excavated pottery features a distinct boundary between pigment and body fabric. However, in the case of pottery in which fine-grained pigments penetrate the body fabric so that layers cannot be distinguished, there is the possibility that the fine-grained pigment layer was applied at a low concentration or immediately after vessel forming. Many cracks can be seen on the surface pigments in thickly painted pottery items, and in many cases, only a small portion of the pigment layers remain due to surface exfoliation and abrasion in the burial environment. It is reported that pottery items may be more easily damaged by abrasion if coated with pigment and polished, so it is believed that the red-burnished pottery of the Samdeok-ri site suffered from weathering in the burial environment. This damage was more extensive in the potsherds that were scattered outside the tomb.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.79-88
• /
• 2021

Objectives: Bolus, which combines 3D-bolus and Step-bolus, was produced and its usefulness is evaluated. Materials and Methods: A Bolus was manufactured with a thickness of 10mm and 5mm using a 3D printer (3D printer, USA), and a Step Bolus of 5mm was bonded to a 5mm thick bolus. In order to understand the characteristics of Step bolus and 3D bolus, the differences in relative electron density, HU value, and mass density of the two bolus were investigated. These two Bolus were applied to anthropomorpic phantom to confirm its effectiveness. After all contouring of the phantom, a treatment plan was established using the computed treatment planning system (Eclipse 16.1, Varian medical system, USA). Treatment plan was performed using electron beam 6MeV, nine dose measurement points were designated on the phantom chest, air-gap was measured at that point, and dose evaluation was performed at the same point for each bolus applied using a glass dosimeter (PLD). Results: Bolus, which combines 3D-bolus 5mm and Step-bolus 5mm, was manufactured and evaluated compared with 3D-bolus 1cm. The relative electron density of 3D Bolus was 1.0559 g/cm2 and the step Bolus was 1.0590 g/cm2, which was different by 0.01%, so the relative electron density was almost the same. In the lightweight measurement of air-gap, the combined bolus was reduced to 54.32% for all designated points compared to 3D-bolus. In the dose measurement using a glass dose meter (PLD), the consistency was high in phantom using combined bolus at most points except the slope point. Conclusion: Combined bolus made by combining 3D-bolus and Step-bolus has all the advantages of 3D-bolus and Step-bolus. In addition, by dose inaccuracy due to Air-gap, more improved dose distribution can be shown, and effective radiation therapy can be performed.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1285-1300
• /
• 2022

Turbidity, the measure of the cloudiness of water, is used as an important index for water quality management. The turbidity can vary greatly in small river systems, which affects water quality in national rivers. Therefore, the generation of high-resolution spatial information on turbidity is very important. In this study, a turbidity retrieval model using the Korea Multi-Purpose Satellite-3 and -3A (KOMPSAT-3/3A) images was developed for high-resolution turbidity mapping of Han River system based on eXtreme Gradient Boosting (XGBoost) algorithm. To this end, the top of atmosphere (TOA) spectral reflectance was calculated from a total of 24 KOMPSAT-3/3A images and 150 Landsat-8 images. The Landsat-8 TOA spectral reflectance was cross-calibrated to the KOMPSAT-3/3A bands. The turbidity measured by the National Water Quality Monitoring Network was used as a reference dataset, and as input variables, the TOA spectral reflectance at the locations of in situ turbidity measurement, the spectral indices (the normalized difference vegetation index, normalized difference water index, and normalized difference turbidity index), and the Moderate Resolution Imaging Spectroradiometer (MODIS)-derived atmospheric products(the atmospheric optical thickness, water vapor, and ozone) were used. Furthermore, by analyzing the KOMPSAT-3/3A TOA spectral reflectance of different turbidities, a new spectral index, new normalized difference turbidity index (nNDTI), was proposed, and it was added as an input variable to the turbidity retrieval model. The XGBoost model showed excellent performance for the retrieval of turbidity with a root mean square error (RMSE) of 2.70 NTU and a normalized RMSE (NRMSE) of 14.70% compared to in situ turbidity, in which the nNDTI proposed in this study was used as the most important variable. The developed turbidity retrieval model was applied to the KOMPSAT-3/3A images to map high-resolution river turbidity, and it was possible to analyze the spatiotemporal variations of turbidity. Through this study, we could confirm that the KOMPSAT-3/3A images are very useful for retrieving high-resolution and accurate spatial information on the river turbidity.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.100
• /
• pp.22-49
• /
• 2021

Bowonsa Temple (普願寺) is located to the north of Gayasan Mountain in Unsan-myeon, Seosan-si, Chungcheongnam-do Province. The cultural properties it enshrines were produced during the late Unified Silla and early Goryeo periods, and include an Iron Seated Buddha. The Japanese Government-General of Korea Museum planned a survey on historical remains in Chungcheongnam-do Province during the early Japanese colonial era, and a field survey was conducted at the Bowonsa Temple site in 1916 (Taishō 5). During this survey, the sculpture of the Iron Seated Buddha (knee: width 212 cm x thickness 167 cm) was found enshrined in a hut. The sculpture was moved to Gyeongbokgung Palace in the following year. However, it is clear that the colossal Iron Seated Buddha was being housed at the Bowonsa Temple site at the start of the Japanese colonial era. This Iron Seated Buddha is presumed to have been produced in 955 by State Preceptor Beopin Tanmun (法印國師 坦文, 900-975). Tanmun was born into an influential family that produced many high officials. He became a leading figure in the Hwaeom (Flower Garland) school of Buddhism under the patronage of King Taejo. He also led Buddhist events at the Goryeo royal court during the reigns of King Hyejong (惠宗, r. 943-945) and King Jeongjong (定宗, r. 945-949). With the emergence of Gyunyeo (均如, 923-973), who was sponsored by Queen Daemok (大穆王后, dates unknown) of the Hwangbo clan (皇甫氏), Tanmun was transferred to Bowonsa Temple far from Kaesong. However, even while there Tanmun strengthened his ties with his supporters under the patronage of the Chungju Yu clan. He appears to have produced this colossal sculpture of Iron Seated Buddha as a prayer for longevity and a happy life for King Gwangjong (光宗, r. 949-975). The inscription on the Stele of State Preceptor Beopin at Bowonsa Temple Site that reads "[I] created a Buddha triad in gold" also suggests the Iron Seated Buddha was produced at Bowonsa Temple. This Iron Seated Buddha is thought to have been enshrined originally in a hall at Building Site No. 3 within the Bowonsa Temple precinct. Since excavations at the temple site have revealed that the temple's main hall was erected in the Joseon period, the Iron Seated Buddha might have been enshrined in a different hall at the time of its creation. It is likely that the sculpture was placed in a hall at Building Site No. 3 since Goryeo-era roof tiles and porcelain have been frequently excavated there and the remains of a square Buddhist altar have survived at the site. At the time of its creation, the Iron Seated Buddha was likely enshrined in a Goryeo-era hall at Building Site No. 3 but was transferred to the main hall during a rebuilding project undertaken at Bowonsa Temple in the Joseon period.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.113-118
• /
• 2022

This study was conducted to diversify the cultivation of mushroom items and develop a competitive variety of Hypsizigus marmoreus. We focused on developing Hypsizigus marmoreus with lower bitterness, likable shape, and high yield. We have collected and tested characteristics of genetic resources from domestic and abroad since 2019. Breeding (2019), characterization (2020), productivity test (2021), and farm demonstration test (2021) have been sequentially conducted. We bred the new variety 'Yunseul' with unique traits. The optimal temperature for mycelial and fruit body growth were 22-25℃ and 15-18℃, respectively. It was similar to the control variety (Mangadak-2Ho) in the pileus form (hemispherical shape) and the cultivation period. However, it was thinner and longer than the control variety with the pileus diameter, thickness, stipe diameter, and length being 19.9 mm, 7.0 mm, 9.4 mm, and 86.3 mm, respectively. The effective number of fruit bodies was 47.8 in bottle cultivation, which was more than that of the control variety. The yield was 197.4 g/bottle (1,100 cc), which was 30% higher than the yield of the control variety, 151.9 g/bottle (1,100 cc). The parent and control varieties were also incubated alongside the new variety. The somatic incompatibility line was distinct. The band pattern in the mycelial DNA PCR reaction was different from that of the parent and control varieties, confirming the hybrid species.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.51-63
• /
• 2023

Numerical analysis was conducted to determine the effect of soil behavior by thawing and freezing of seasonal frozen soil on pile foundations. The analysis was performed using the finite element method (FEM) to simulate soil-pile interaction based on the atmosphere temperature change. Thermomechanical coupled modeling using FEM was applied with the temperature-dependent nonlinear properties of the frozen soil. The analysis model cases were applied to the MCR and HDP models to simulate the elastoplastic behavior of soil. The numerical analysis results were analyzed and compared with various conditions having different length and width sizes of the pile. The results of the numerical analysis showed t hat t he HDP model was relat ively passive, and t he aspect and magnit ude of t he bearing capacit y and displacement of the pile head were similar depending on the length and width of the pile conditions. The vertical displacement of the pile head by thawing and freezing of the ground showed a large variation in displacement for shorter length conditions. In the MCR model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0387 and 0.0277 m, respectively. In the HDP model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0367 and 0.0264 m, respectively. The results of the pile bearing capacity for the two elastoplastic models showed a larger difference in the width condition than the length condition of the pile, with a maximum of about 14.7% for the width L condition, a maximum of about 5.4% for M condition, and a maximum of about 5.3% for S condition. The significance of the effect on the displacement of the pile head and the bearing capacity depended on the pile-soil contact area, and the difference depended on the presence or absence of an active layer in the soil and its thickness.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.88-96
• /
• 2024

This study was conducted to determine the optimal light conditions for the in situ and ex situ conservation and restoration of Osmanthus insularis, a rare plant species in South Korea. Evaluations included the growth performance, leaf morphological features, photosynthetic characteristics, and photosynthetic pigment contents of seedlings grown from April to November under different light conditions (100%, 55%, 20%, and 10% relative light intensity). The shoot lengths and root collar diameters did not differ significantly with relative light intensity. The dry weights of leaves, stems, and roots and the leaf number were highest at 55% relative light intensity. The leaf shape showed morphological acclimation to light intensity, with leaf area decreasing and thickness increasing as the relative light intensity increased. Several leaf parameters, including photosynthetic rate and stomatal conductance at light saturation point, net apparent quantum yield, and dark respiration, as well as chlorophyll a, chlorophyll b, and carotenoid contents, were all highest at 55% relative light intensity. Under full light conditions, the leaves were the smallest and thickest, but the chlorophyll content was lower than at 55% relative light intensity, resulting in lower photosynthetic ability. Plants grown at 10% and 20% relative light intensity showed lower chlorophyll a, chlorophyll b, and carotenoid contents, as well as decreased photosynthetic and dark respiration rates. In conclusion, O. insularis seedlings exhibited morphological adaptations in response to light intensity; however, no physiological responses indicating enhanced photosynthetic efficiency in shade were evident. The most favorable light condition for vigorous photosynthesis and maximum biomass production in O. insularis seedlings appeared to be 55% relative light intensity. Therefore, shading to approximately 55% of full light is suggested for the growth of O. insularis seedlings.