• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.858-864
• /
• 2019

본 논문에서는 센서 유틸리티 네트워크에서 센서 노드들 사이의 주파수 차이로 인한 데이터 손실을 제거하기 위한 클록 시스템이 제안된다. 각 센서 노드를 위한 제안된 클록 시스템은 버스트 클록-데이터 복원 회로, 32-위상 클록을 출력하는 디지털 위상 고정 루프, 그리고 프로그래밍 가능한 개방형 루프 분수 분할기를 사용하는 디지털 주파수 합성기로 구성된다. 첫번째 센서 노드에는 버스트 클록-데이터 복원 회로 대신 능동 인덕터를 사용하는 CMOS 발진기가 사용된다. 제안된 클록 시스템은 1.2 V 공급 전압을 이용하는 65nm CMOS 공정에서 설계된다. 센서 노드들 사이의 주파수 오류가 1%일 때, 제안하는 버스트 클록-데이터 복원 회로는 기준 클록으로 5Mbps 데이터 속도에 대해 64배 체배된 주파수를 가짐으로 4.95 ns의 시간지터를 가진다. 설계된 디지털 주파수 합성기의 주파수 변경은 100 kHz에서 320 MHz의 주파수 범위에서 출력 클록의 한 주기 내에 수행된다.

• Molecules and Cells
• /
• 제44권2호
• /
• pp.88-100
• /
• 2021

Anoctamin 6/TMEM16F (ANO6) is a dual-function protein with Ca2+-activated ion channel and Ca2+-activated phospholipid scramblase activities, requiring a high intracellular Ca2+ concentration (e.g., half-maximal effective Ca2+ concentration [EC50] of [Ca2+]i > 10 μM), and strong and sustained depolarization above 0 mV. Structural comparison with Anoctamin 1/TMEM16A (ANO1), a canonical Ca2+-activated chloride channel exhibiting higher Ca2+ sensitivity (EC50 of 1 μM) than ANO6, suggested that a homologous Ca2+-transferring site in the N-terminal domain (Nt) might be responsible for the differential Ca2+ sensitivity and kinetics of activation between ANO6 and ANO1. To elucidate the role of the putative Ca2+-transferring reservoir in the Nt (Nt-CaRes), we constructed an ANO6-1-6 chimera in which Nt-CaRes was replaced with the corresponding domain of ANO1. ANO6-1-6 showed higher sensitivity to Ca2+ than ANO6. However, neither the speed of activation nor the voltage-dependence differed between ANO6 and ANO6-1-6. Molecular dynamics simulation revealed a reduced Ca2+ interaction with Nt-CaRes in ANO6 than ANO6-1-6. Moreover, mutations on potentially Ca2+-interacting acidic amino acids in ANO6 Nt-CaRes resulted in reduced Ca2+ sensitivity, implying direct interactions of Ca2+ with these residues. Based on these results, we cautiously suggest that the net charge of Nt-CaRes is responsible for the difference in Ca2+ sensitivity between ANO1 and ANO6.

• Current Photovoltaic Research
• /
• 제8권4호
• /
• pp.129-133
• /
• 2020

It is very important to optimize the reflectance of incident light in solar modules for improving output power and reducing loss of cell-to-module (CTM). It is assumed that a higher reflectance backsheet may improve optical efficiency. However how much output power is related to optical properties by reflectance property of backsheets have not been revealed clearly yet. A total of 3 types of industrial backsheets with 3 type of industrial encapsulants (EVA or POE) were analyzed as fabricated mini modules used shingled cells. According to the type of backsheets, the difference between the highest and lowest average reflectance in the range of 400 nm to 1200 nm was found to be 13.08% by UV-visible spectroscopy. Also, when using the same encapsulant, the maximum gap value of the output power increase was measured by about 3.755 mW% (166.02 mW). The correlation between reflectance and output power was experimentally found by measuring the output property of the fabricated shingled mini modules.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권1호
• /
• pp.39-46
• /
• 2021

This study confirmed the usefulness of the copper filter according to the mode change by comparing and analyzing the energy change according to the application of the copper filter and the change in effective dose and image quality according to the distance to the subject in the DR(Digital Radiography) system. The average energy increased when the copper filter was applied and the reduction rate by 50% of mAs was increased as the thickness of the copper filter increased according to the application of the 10 kVp rule in AEC mode. The effective dose decreased as the thickness increased when the copper filter was applied in AEC(Automatic Exposure Control) mode and manual mode according to the application of the 10 kVp rule, and the decrease rate decreased with increasing 10 kVp increments. As a result of analyzing the dicom images for AEC mode and manual mode with Image J. the PSNR(Peak Signal to Noise Ratio) values were approximate values of less than 30 dB for each mode and for each copper filter thickness. When the copper filter was applied, the average energy increased, so when the 10 kVp rule was applied, the mAs for each mode could be reduced, and the effective dose could also be reduced. However, as the distance and tube voltage increased, the reduction rate of mAs decreased, and the quality of the image was found to decrease when the copper filter was applied, but there was no difference in quality of the image when the copper filter thickness increased.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.72-77
• /
• 2021

The radial distribution of etch rate was analyzed using the ion energy flux model in VHF-CCP. In order to exclude the effects of polymer passivation and F radical depletion on the etching. The experiment was performed in Ar/SF6 plasma with an SF6 molar ratio of 80% of operating pressure 10 and 20 mTorr. The radial distribution of Ar/SF6 plasma was diagnosed with RF compensated Langmuir Probe(cLP) and Retarding Field Energy Analyzer(RFEA). The radial distribution of ion energy flux was calculated with Bohm current times the sheath voltage which is determined by the potential difference between the plasma space potential (measured by cLP) and the surface floating potential (by RFEA). To analyze the etch rate uniformity, Si coupon samples were etched under the same condition. The ion energy flux and the etch rate show a close correlation of more than 0.94 of R² value. It means that the etch rate distribution is explained by the ion energy flux.

• Tribology and Lubricants
• /
• 제37권6호
• /
• pp.224-231
• /
• 2021

Recently, the waterproofing performance of high-voltage connectors in automotive vehicles has attracted increased interest. In this study, an optimal cross-sectional shape was derived to obtain uniform contact pressure and strain by considering stress relaxation problems caused by initial tension when mounting a seal. A high strain of 52.1 was distributed in the round region, owing to excessive initial tension. The finite element method (FEM) analysis indicated that the strain corresponding to the optimal initial tensile was 11. We adopted six design factors to optimize the seal cross-section and three factors as the main design factors. An orthogonal arrangement table was prepared using Minitab. FEM analyses of 16 study models were conducted to determine the optimized model. The contact pressure of the optimization model is the most evenly distributed while satisfying the waterproof performance of 0.47 MPa. Compared to the initial model, the difference in strain decreases from 35.5% to 19.6%. Finally, the derived cross-sectional shape can reduce the strain of the round region by 33.8% and the differences in the contact pressure at the upper and lower surfaces by 42% and 76%, respectively.

• 한국전자통신학회논문지
• /
• 제17권4호
• /
• pp.715-722
• /
• 2022

치아는 주기적으로 치과에 가서 검진을 하지 않으면 평소에 통증이나 불편이 있기 전에는 치아 질병을 알아차리기 어렵다. 치석은 구강 내 음식 또는 이물질과 세균의 결합으로 생성된다. 치석을 이루고 있는 세균으로부터 전분이 분해되는데 이때 발생하는 산이 치아의 법랑질을 녹여 충치가 되기 때문에 치석관리가 중요하다. 입속 세균의 대사 산물인 포피린은 405nm 파장에서 반응하여 붉은 형광을 띠게 되며 특정 파장의 필터를 거치면 영상으로 세균을 확인할 수 있다. 위의 방법으로 프라그 및 치석을 형광으로 검출하고 500nm 이상의 파장을 통과시키는 노란색 계열의 필터를 카메라 앞에 부착하여 촬영한다. 이는 매트랩을 이용하여 이미지 영상처리를 통해 적색 형광 부분을 검출 후 표시한다. 또한, 광계측 회로를 통해 정상 치아와 치석의 치아 전압값 차이를 이용해 아두이노로 연결하여 LCD에 표시한다. 사용자는 이를 통해 보다 정확한 치석의 유무와 위치를 알 수 있다.

• 한국방사선학회논문지
• /
• 제17권2호
• /
• pp.215-221
• /
• 2023

수정체가 포함된 Brain CT 스캔 조건 중 관전압을 80, 100, 120 kVp로 변화시켜 적용하고 납, 납 고글, 황산바륨 실리콘 혼합 차폐체를 이용하여 선량의 변화를 분석하고, 차폐체가 화질에 영향을 미치는 정도를 SNR, CNR, SSIM 지수 분석방법을 적용하여 비교 분석해 보았다. 그 결과 모든 차폐물질 적용으로 선량 감소는 하였지만, 선량 감소 차는 크지 않은 것으로 분석되었다(P > 0.05). 또한 차폐물질 적용으로 화질의 변화는 납 고글 적용 시 SNR, CNR이 가장 높았고 SSIM 분석에서도 기준값 1에 가장 근접하여 구조적 유사도가 가장 우수한 것으로 측정되었다. 따라서, 본 연구결과를 기준으로 더욱 다양한 차폐체 적용과 임상실험 결과를 도출하여 적용한다면 차폐체 활용 검사 시 임상 적용기준에 도움을 줄 수 있을 것으로 사료된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.37-40
• /
• 2007

Large critical current is one of the prerequisites for the design of superconducting electrical equipments with large power capacity. To enlarge the critical current. multiple parallel connection is inevitable. In multiple parallel superconducting coils. the difference in normal resistance of each shunt leads to unequal current distribution. which may yield burnout. Therefore. uniform current distribution is required for a stable operation of multiple parallel superconducting coils. In this paper, Rogowski coils were fabricated to measure each shunt current of a 4-parallel superconducting coil. Four Rogowski coils were installed at the copper bars, which are used as current leads in superconducting coils. As a result, linearity of the Rogowski coils was ascertained and coefficients of each coil, the ratio of voltage and current, were derived. The coefficients were compared with theoretically calculated values. Based on the coefficients, each shunt current was calculated in a 4-parallel superconducting coil, where uniform current. distribution was confirmed. This paper verified the feasibility of the fabricated Rogowski coils as well as operational stability of the 4-parallel superconducting coil in 77K.

• 한국재료학회지
• /
• 제33권7호
• /
• pp.295-301
• /
• 2023

Thermoelectric (TE) energy harvesting, which converts available thermal resources into electrical energy, is attracting significant attention, as it facilitates wireless and self-powered electronics. Recently, as demand for portable/wearable electronic devices and sensors increases, organic-inorganic TE films with polymeric matrix are being studied to realize flexible thermoelectric energy harvesters (f-TEHs). Here, we developed flexible organic-inorganic TE films with p-type Bi_0.5Sb_1.5Te₃ powder and polymeric matrices such as poly(3,4-eethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and poly (vinylidene fluoride) (PVDF). The fabricated TE films with a PEDOT:PSS matrix and 1 wt% of multi-walled carbon nanotube (MWCNT) exhibited a power factor value of 3.96 µW·m^-1·K^-2 which is about 2.8 times higher than that of PVDF-based TE film. We also fabricated f-TEHs using both types of TE films and investigated the TE output performance. The f-TEH made of PEDOT:PSS-based TE films harvested the maximum load voltage of 3.4 mV, with a load current of 17.4 µA, and output power of 15.7 nW at a temperature difference of 25 K, whereas the f-TEH with PVDF-based TE films generated values of 0.6 mV, 3.3 µA, and 0.54 nW. This study will broaden the fields of the research on methods to improve TE efficiency and the development of flexible organic-inorganic TE films and f-TEH.