• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.696-699
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the conventional sliding system is required. There systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system can solve these problem. In this paper, the object transport system using the excitation of ultrasonic wave is proposed. The experiments for finding the optimal excitation frequency, finding phase-difference between two ultrasonic wave generators are performed. The relationship of transporting speed according to the change of flexural beam shape is verified and the system performance for practical use is evaluated.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.18-26
• /
• 2016

This paper proposes a compensation algorithm for reducing a specific ripple component on synchronous reference frame phase locked loop (SRF-PLL) in grid-tied single-phase inverters. In general, SRF-PLL, which is based on all-pass filter to generate virtual voltage, is widely used to estimate the grid phase angle in a single-phase system. In reality, the estimated grid phase angle might be distorted because the phase difference between actual and virtual voltages is not 90 degrees. That is, the phase error is caused by the difference between cut-off frequency of all-pass filter and grid frequency under grid frequency variation. Therefore, the effects on phase angle and output current attributed to the phase error are mathematically analyzed in this paper. In addition, the proportional resonant (PR) controller is adapted to reduce the effects of phase error. The validity of the proposed algorithm is verified through several simulations and experiments.

• Journal of Multimedia Information System
• /
• 제6권3호
• /
• pp.155-164
• /
• 2019

We intended to confirm that microwave attenuation by tree leaves is strongly linked to water content in leaves. We sampled natural broadleaves, including Japanese cinnamon, and investigated their effects on the microwave (3 to 20 GHz) frequency characteristics using a network analyzer. Experiments determined that microwave attenuation by foliage increases as a linear function of frequency per unit weight (gram). As the frequency increases, the spatial resolution increases, but the phase difference (imaginary component) increases. So we solved the dispersion of phase difference by sweeping the frequency and taking the intermediate value. Based on these experimental results, we developed a microwave scanner on 10Ghz to describe foliage moisture as a image and to enable assessments of leaf condition. Photosynthesis is the process whereby plants synthesize oxygen and sugars from carbon dioxide and water, thereby converting light energy into chemical energy. Since water is a major parameter of photosynthesis, the quantity of water accumulated inside a leaf reflects leaf health. The equipment described here and related microwave technologies will help assess the capacity of leaves to absorb atmospheric carbon dioxide.

• The Journal of Korean Physical Therapy
• /
• 제13권3호
• /
• pp.685-692
• /
• 2001

Study the variation of low frequency electrical stimulation on human metabolism which serum to test the increasement of creatine- kinase, myoglobin, lactate .and pyruvate. The results were as followed: 1) Creatine kinase increasement showed significant difference between 200 Hz stimulation group and control group, and also between 300Hz stimulation group and control group, but no significant increasement difference showed in 50 Hz stimulation group compared to control group. 2) Lactate increasement showed significant difference in 200 Hz stimulation group and 300 Hz stimulation group compared to control group, but no significant difference showed in 50 Hz stimulation group. 3) Pyruvate increasement showed significant difference in 50 Hz stimulation group and 200 Hz stimulation group compared to control group, but no significant increasement difference showed between 50 Hz stimulation group and control group. (P < 0.05) 4) Myoglobin increasement showed significant difference in 50Hz stimulation group and 200 Hz stimulation group compared to control group, and also in 200 Hz stimulation group and 300 Hz stimulation group compared to 50Hz stimulation group. ( P < 0.05)

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1023-1032
• /
• 2003

The effect of local forcing on the separated flow over a backward-facing step is investigated through hot-wire measurements and flow visualization with multi-smoke wires. The boundary layer upstream of the separation point is laminar and the Reynolds number based on the free stream velocity and the step height is 13800. The local forcing is given from a slit located at the step edge and the forcing signal is always defined when the wind tunnel is in operation. In case of single frequency forcing, the streamwise velocity and the reattachment length are measured under forcing with various forcing frequencies. For the range of 0.010〈S $t_{\theta}$〈0.013, the forcing frequency component of the streamwise velocity fluctuation grows exponentially and is saturated at x/h = 0.75 , while its subharmonic component grows following the fundamental and is saturated at x/h = 2.0. However, the saturated value of the subharmonic is much lower than that of the fundamental. It is observed that the vortex formation is inhibited by the forcing at S $t_{\theta}$ = 0.019 . For double frequency forcing, natural instability frequency is adopted as a fundamental frequency and its subharmonic is superposed on it. The fundamental frequency component of the streamwise velocity grows exponentially and is saturated at 0.5 < x/ｈ < 0.75, while its subharmonic component grows following the fundamental and is saturated at x/ｈ= 1.5 . Furthermore, the saturated value of the subharmonic component is much higher than that for the single frequency forcing and is nearly the same or higher than that of the fundamental. It is observed that the subharmonic component does not grow for the narrow range of the initial phase difference. This means that there is a range of the initial phase difference where the vortex parring cannot be enhanced or amplified by double frequency forcing. In addition, this effect of the initial phase difference on the development of the shear layer and the distribution of the reattachment length shows a similar trend. From these observations, it can be inferred that the development of the shear layer and the reattachment length are closely related to the vortex paring.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.253-258
• /
• 1993

In this paper, we propose a new method to extract the line spectrum pair (LSP) frequencies. When speech signal is analyzed by the autocorrelation method, the spectral difference in the logarithmic spectra of the model at steps p and p-1 oscillates. There are p-1 frequency points where the values of the spectral dfference take on either maximum or minimum between 0 and half sampling frequency. We show that these frequencies are excatly the LSP frequencies of order p-1, which can be found by searching the frequencies where the spectral difference reaches either maxima or minima. also, the LSP frequencies of order p can be obtained from this spectral difference. In this case, we derive the expression governing the pth order LSP frequencies. The efficient search for finding the LSP frequencies of order p can be done by proving the property that the LSP frequencies of order p and p-1 are interlaced with each other.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.269-294
• /
• 2013

This paper is concerned with the determination of exact buckling loads and vibration frequencies of variable thickness isotropic plates using well known finite difference technique. The plates are subjected to uni, biaxial compression and shear loadings and various combinations of boundary conditions are considered. The buckling load is found out as the in plane load that makes the determinant of the stiffness matrix equal to zero and the natural frequencies are found out by carrying out eigenvalue analysis of stiffness and mass matrices. New and exact results are given for many cases and the results are in close agreement with the published results. In this paper, like finite element method, finite difference method is applied in a very simple manner and the application of boundary conditions is also automatic.

• ETRI Journal
• /
• 제34권2호
• /
• pp.260-263
• /
• 2012

In this letter, we propose a moving-target tracking algorithm based on a particle filter that uses the time difference of arrival (TDOA)/frequency difference of arrival (FDOA) measurements acquired by distributed sensors. It is shown that the performance of the proposed algorithm, based on the particle filter, outperforms the one based on the extended Kalman filter. The use of both the TDOA and FDOA measurements is shown to be effective in the moving-target tracking. It is proven that the particle filter deals with the nonlinear nature of the movingtarget tracking problem successfully.

• 지구물리와물리탐사
• /
• 제3권2호
• /
• pp.39-47
• /
• 2000

복잡한 지층구조에 대한 파동방정식의 해를 유한 차분법을 이용하여 구하는것은 많은 컴퓨터 계산시간과 기억 용량이 필요하다. 컴퓨터 계산시간과 기억용량은 최소 파장당 격자수를 줄이므로써 감소 시킬 수 있지만 수치분산으로 인해 정확도가 떨어지게 마련이다. 본 연구에서는 정확도를 유지하면서 파장당 격자수를 줄이는 방법으로 이용되고 있는 가중평균법을 최대 169점 까지 확장하여 주파수 영역에서 음향파동방정식의 해를 유한차분법으로 구할 때 최소 격자수를 구하기 위한 격자분석을 실시하였다. 지금까지 수치오차가 정확도 $1\%$내에 존재하기 위해서는 일반적인 5점을 이용하는 경우 파장당 격자수가 13개 이상이 필요하고, 9점의 경우 9개, 25점에서는 3개, 49점에서는 2.7개 이상이 필요하였다. 본 연구에서 정확도를 유지하기 위한 최소격자수를 결정하기 위해 실시된 격자분석 결과 81점에서는 2.5개 121점에서는 2.3개 그리고 169점에서는 오차 한계를 벗어나 가중평균 계수를 구할 수 없었으며 격자수를 2개까지 줄일 수 없음을 알 수 있었다. 또한 격자분석을 통해 가중평균에 적용되는 격자수가 증가할수록 정확도는 증가하지만 차분식 자체가 증가하여 매우 복잡하게 된다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.204-205
• /
• 2003

미량기체의 흡수스펙트럼을 높은 감도로 측정하는 공동 광자감쇠 분광법(cavity ringdown spectroscopy； CRDS)을 나노초 레이저 펄스의 차주파수 생성(difference-frequency generation； DFG)을 광원으로 이용하여 파장 3 ~ 4 $\mu\textrm{m}$ 영역에서 구현하였다. CRDS는 고반사율 거울로 이루어진 광학적 공동에 단일 파장의 빛을 가두었다가 그 에너지의 시간적 감소율을 측정하여 공동 속 기체의 흡수율을 알아내는 방법이다. (중략)