• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.204-208
• /
• 2013

In this study, $KNbO_3$-substituted (Li,Na,K)(Nb,Sb,Ta)$O_3$ ceramics were investigated to develop Pb-free composition ceramics for multilayer actuator and energy harvester applications. The X-ray diffraction analysis indicated that all samples were pure perovskite phase and no secondary phase was found. A tetragonality as a function of $KNbO_3$ substitution showed the maximum value at 1.5 mol% $KNbO_3$ and then decreased. The SEM image analysis showed the maximum grain size of $3.14{\mu}m$ at 1.5mol% $KNbO_3$. In the composition ceramics with 1.5 mol% $KNbO_3$ sintered at $1,100^{\circ}C$, excellent properties of density= 4.75 $g/cm^3$, electromechanical coupling factor ($k_p$)= 0.50 and piezoelectric constant($d_{33}$)= 290 pC/N were obtained, respectively, suitable for piezoelectric actuator and energy harvester applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.513-519
• /
• 2023

It was reported that a tetragonal phase can be stabilized with maintaining good piezoelectric properties when Na_0.5K_0.5NbO₃ (KNN) is modified with 0.06 mol SrTiO₃. However, such a high amount of SrTiO₃ leads not only to poor sinterability but low Curie temperature (T_C). To maintain high TC with good piezoelectric properties in KNN-based lead-free piezoelectric ceramics, this study investigates the effect of Li-doping on the dielectric and piezoelectric properties of 0.96Na_0.5K_0.5NbO₃-0.04SrTiO₃ (KNN-4ST) ceramics. As a result, the orthorhombic-tetragonal phase transition was observed at 2 mol% Li₂CO₃ modified KNN-4ST ceramics, whose T_C, d₃₃ and k_p values are 328℃, 165pC/N and 0.33, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.390-395
• /
• 2011

In order to develope piezoelectric transformer for the ballast of fluorescent lamp, the composition of piezoelectric ceramics was 0.95Pb($Zr_xTi_{1-x}$)O3+yPb($Mn_{1/3}Nb_{2/3}$)$O_3$+(0.05-y)Pb($Sb_{1/2}Nb_{1/2}$)$O_3$. PMN compound was selected to improve mechanical quality factor and PSN to prevent the decrease of dielectric constant and electromechanical coupling coefficient. Dielectric and piezoelectric characteristics in the region of MPB of 0.95Pb($Zr_xTi_{1-x}$)$O_3$+yPb($Mn_{1/3}Nb_{2/3}$)$O_3$+(0.05-y)Pb($Sb_{1/2}Nb_{1/2}$)$O_3$ ceramics was discussed both quantatively and qualitatively.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.323-330
• /
• 2017

To understand the defect chemistry of multiferroic $BiFeO_3-based$ systems, we synthesized nonstoichiometric $Bi_{1+x}FeO_{3{\pm}{\delta}}$ ceramics by conventional solid-state reaction method and studied their structural, dielectric and high-temperature charge transport properties. Incorporation of an excess amount of $Bi_2O_3$ lowered the Bi deficiency in $BiFeO_3$. Polarization versus electric field (P-E) hysteresis loop and dielectric properties were found to be improved by the $Bi_2O_3$ addition. To better understand the defect effects on the multiferroic properties, the high temperature equilibrium electrical conductivity was measured under various oxygen partial pressures ($pO_2{^{\prime}}s$). The charge transport behavior was also examined through thermopower measurement. It was found that the oxygen vacancies contribute to high ionic conduction, showing $pO_2$ independency, and the electronic carrier is electron (n-type) in air and Ar gas atmospheres.

• Journal of Sensor Science and Technology
• /
• v.19 no.2
• /
• pp.155-159
• /
• 2010

0.96$(Na_{0.5}K_{0.5})NbO_3$-0.04$(Ba_{(1-x)}Sr_x)TiO_3$ lead free piezoelectric ceramics were synthesized to enhance the piezoelectric properties of (Na,K)$NbO_3$. The systhesis and sintering method were the conventional solid state reaction method and general sintering method in air atmosphere. The polymorphic phase transition(PPT) was observed at all composition(0 $\leq$ x $\leq$ 0.05) when $(Ba_{(1-x)}Sr_x)TiO_3$ were added in the $(Na_{0.5}K_{0.5})NbO_3$. As Sr concentration was increased, grain size, dielectric loss(tan$\delta$) and mechanical quality factor($Q_m$) were decreased and piezoelectric constant($d_{33}$) and electromechanical coupling factor($k_p$) were increased within a limited value. The optimized piezoelectric and properties, $d_{33}$, $k_p$, $Q_m$, and tand, of 0.96$(Na_{0.5}K_{0.5})NbO_3$-0.04$(Ba_{(1-x)}Sr_x)TiO_3$ were 139 pC/N, 0.31 %, 95, 0.04 at the composition of x=0.04.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.499-503
• /
• 2011

Recently, variety of organic and inorganic hybrid materials have recently investigated as alternative routes to SiOC, $SiO_2$ thin film formation at low temperatures for applications in electronic ceramics. Specially, silicon based polymers, such as polycarbosilane, polysilane and polysilazane derivatives have been studied for use in electronic ceramics and have been applied as dielectric or insulating materials. In this study, Polycarbosilane(PCS), which Si-$CH_2$-Si bonds build up the backbone of the polymer, has been investigated as low-k materials using a solution process. After heat treatment at 350$^{\circ}C$ under $N_2$ atmosphere, chemical composition and dielectric constant of the thin film were $SiO_{0.27}C_{1.94}$ and 1.2, respectively. Mechanical property measured using nanoindentor shows 1.37 GPa.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.2
• /
• pp.111-120
• /
• 1998

In this paper, the $(SrPb)(CaMg)TiO_3$ ceramics with paraelectric properties were fabricated by the mixed oxide method. It was investigated that which the variation of contents of $Bi_2O_3{\cdot}3TiO_2$ effects on structural, dielectrical and electrical properties of specimens. As a result, the grain size were grown with increasing the contents of $Bi_2O_3{\cdot}3TiO_2$. The relative dielectric constants were increased up to 4[mol%] of $Bi_2O_3{\cdot}3TiO_2$, and decreased more or less at a low temperature in the specimens which had more than. But the temperature coefficient. of capacitance were showed ${\pm}25$[%]. The dielectric loss were less than 0.05 in all specimens which had more than 4[mol%] of $Bi_2O_3{\cdot}3TiO_2$. In order to investigate the behavior of charged particles, the characteristics of electrical conduction were measured. As a result, the conduction current was divided into the three steps as a function of DC electric field. The first step was Ohmic region due to ionic conduction, below 15[kV/cm]. The second step was showed a saturation which seems to be related to a depolarizing field occuring in field-enforced ferroelectric phase, between 15[kV/cm] and 40[kV/cm]. The third step was attributed to Child's law related to space charge which injected from electrode, above 40[kV/cm].

• Korean Journal of Materials Research
• /
• v.27 no.3
• /
• pp.144-148
• /
• 2017

The effects of an excess of Bi on the piezoelectric and dielectric properties of $0.60Bi_{1+x}FeO_3-0.40BaTiO_3$ (x = 0, 0.01, 0.03, 0.05, 0.07) were investigated. The ceramics were processed through a conventional solid state reaction method and then quenched after sintering at different temperatures in the range of $980{\sim}1070^{\circ}C$. A single perovskite structure without any secondary phase was confirmed for all compositions and temperatures. It was found that excess Bi reduced the sintering temperatures, acted as a sintering aid and enhanced the properties in combination with quenching. Curie temperature ($T_C$) was found to slightly increase due to the presence of excess Bi; electrical properties were also improved by quenching. At x = 0.03 and $1030^{\circ}C$, remnant polarization ($2P_r$) was as high as $45.4{\mu}C/cm^2$ and strain at 40 kV/cm was up to 0.176 %.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.860-865
• /
• 2001

After manufacturing 2mol% CdO substitute $0.05Pb(Mn_{1/3}Sb_{2/3})O_3-0.95Pb(Zr_{0.52}Ti_{0.48})O_3$ piezoelectric ceramics powder as starting material, to manufacture green sheets using Doctor Blade method. The optimum composition of slurry was studied. Moreover, the sintering properties and the dielectric and piezoelectric properties with variation a thickness of the manufactured sheets were investigated. The optimum of slurry was investigated by the rheology with addition of additives, the sintering condition was decided by TGA. And the properties of sheet were investigated through SEM. XRD. The optimum of slurry was the stablest at dispersant 3.0 wt% to solid loading 30vol%. After, at addition of binder/plasticizer(0.75/0.25) 3.0wt%, viscosity was 7.55Pa${\cdot}$s. The dielectric and piezoelectric properties of the sheet were increased a little with the increasing of sintering temperature but were not variable with variation of sheet thickness.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.308-313
• /
• 2001

We report the effects of the V$_2$O$_{5}$ additive on the sintering behavior and microwave dielectric properties of ZnNb$_2$O$_{6}$ ceramics. Densification temperatures of V$_2$O$_{5}$-doped ZnNb$_2$O$_{6}$ samples are lowered to the range of 875-9$25^{\circ}C$ because of the liquid phase sintering. Doped samples are composed of a Zn(Nb,V)$_2$O$_{6}$ solid solution and second phases. Up to 5 wt% V$_2$O$_{5}$ is the only second phase, however, V$_2$O$_{5}$ also exists as the second phase for 10 wt% V$_2$O$_{5}$ addition. In comparison with reported values of undoped ZnNb$_2$O$_{6}$ ceramics, microwave properties of V$_2$O$_{5}$-doped ZnNb$_2$O$_{6}$ samples are seriously degraded, which is confirmed to originate from the second phases. The optimum microwave properties (Q$\times$f=13,800, $\varepsilon$$_{r}$=23, $\tau$$_{f}$=-66ppm/$^{\circ}C$) are obtained from ZnNb$_2$O$_{6}$ with the addition of 5 wt% V$_2$O$_{5}$ sintered at 90$0^{\circ}C$.90$0^{\circ}C$.EX>.