• 제목/요약/키워드: Dicing test

검색결과 16건 처리시간 0.016초

디바이스 내장형 플렉시블 전자 모듈 제조 및 신뢰성 평가 (Fabrication and Reliability Test of Device Embedded Flexible Module)

  • 김대곤;홍성택;김덕흥;홍원식;이창우
    • Journal of Welding and Joining
    • /
    • 제31권3호
    • /
    • pp.84-88
    • /
    • 2013
  • These days embedded technology may be the most significant development in the electronics industry. The study focused on the development of active device embedding using flexible printed circuit in view of process and materials. The authors fabricated 30um thickness Si chip without any crack, chipping defects with a dicing before grinding process. In order to embed chips into flexible PCB, the chip pads on a chip are connected to bonding pad on flexible PCB using an ACF film. After packaging, all sample were tested by the O/S test and carried out the reliability test. All samples passed environmental reliability test. In the future, this technology will be applied to the wearable electronics and flexible display in the variety of electronics product.

Sand Blast를 이용한 Glass Wafer 절단 가공 최적화 (Optimization of Glass Wafer Dicing Process using Sand Blast)

  • 서원;구영보;고재용;김구성
    • 한국세라믹학회지
    • /
    • 제46권1호
    • /
    • pp.30-34
    • /
    • 2009
  • A Sand blasting technology has been used to address via and trench processing of glass wafer of optic semiconductor packaging. Manufactured sand blast that is controlled by blast nozzle and servomotor so that 8" wafer processing may be available. 10mm sq test device manufactured by Dry Film Resist (DFR) pattern process on 8" glass wafer of $500{\mu}m's$ thickness. Based on particle pressure and the wafer transfer speed, etch rate, mask erosion, and vertical trench slope have been analyzed. Perfect 500 um tooling has been performed at 0.3 MPa pressure and 100 rpm wafer speed. It is particle pressure that influence in processing depth and the transfer speed did not influence.

Wafer-Sawing시 발생하는 particle을 효과적으로 제거하기 위한 DI water 노즐의 최적 설계 (DI water Nozzle Design for Effective Removal of the Particles Generated during Wafer-sawing)

  • 김병수;이기준;이성재
    • 마이크로전자및패키징학회지
    • /
    • 제10권4호
    • /
    • pp.53-60
    • /
    • 2003
  • CCD(Charge-Coupled Device) wafer와 같이 표면이 polymer 성분의 micro lens로 구성되어있는 경우 passivation 막을 도포하지 않는 것이 보통인데, 이때 particle이 lens 표면에 쉽게 달라붙는 현상이 나타나게 된다. 특히 sawing 하면서 발생하는 particle은 치명적인 불량을 유발한다. 본 연구에서는 sawing에서 발생한 particle을 효과적으로 flushing하기위한 방안으로 측면노즐과 중심노즐의 분사위치, 분사각도, 퍼짐각도를 최적화 하고, 아울러 flushing 노즐을 추가한 새로운 형태의 wafer saw를 도입하였다. 개선된 saw를 적용하여 실험한 결과 particle로 인한 CCD chip의 불량률이 9.l%로부터 0.63%로 현격하게 개선되었음을 확인할 수 있었다.

  • PDF

WS2 윤활제를 첨가한 마이크로 다이아몬드 블레이드의 절삭성능과 기계적 특성 (Cutting Efficiency and Mechanical Characteristics of Diamond Micro-blades Containing WS2 Lubricant)

  • 김송희;장재철
    • 한국표면공학회지
    • /
    • 제45권1호
    • /
    • pp.37-42
    • /
    • 2012
  • $WS_2$ powder was added to the Cu/Sn bond metal of diamond micro-blades for machining of semi-conductor and IC chips to improve cutting efficiency. The effect of $WS_2$ additive on cutting efficiency was investigated and compared with the micro-blades with $MoS_2$ developed in previous research. Flexural strength, frictional coefficient, and wear resistance of blades decreased with $WS_2$ but wear depth increased. It was found that the blades including $WS_2$ consumed less momentary energy than the blades containing $MoS_2$ during dicing test. Micro-blades containing $WS_2$ exhibited lower flexural strength than the blades with $MoS_2$ resulting from higher amount of sintering defects relevant to the less effectiveness of $WS_2$ on fluidity. The effect of $WS_2$ and $MoS_2$ on fluidity during sintering was analyzed in terms of mismatching degree between the longitudinal direction of lubricant particles and the perpendicular direction to the compact loading. The blade with 8.1 vol.% of $WS_2$ showed the best cutting efficiency.

다이아몬드 마이크로블레이드의 내구성과 절삭성능에 미치는 흑연과 MoS2의 첨가효과 (The Effect of Graphite and MoS2 on Endurance and Cutting Performance of Diamond Micro Blades)

  • 문종철;김송희
    • 한국표면공학회지
    • /
    • 제41권6호
    • /
    • pp.335-340
    • /
    • 2008
  • Cutting performance and wear behavior were studied with the diamond micro-blade of Cu/Sn bond materials containing various amount of lubricant materials such as graphite and $MoS_2$. Measurement of instantaneous electric power consumption for cutting glass workpiece at the constant velocity was conducted and proposed as a method to assess cutting efficiency. The energy consumption of micro-blade for glass cutting decreased with the content of graphite and $MoS_2$ while wear amount of blade in volume increased with the amount of lubricant addition during the dicing test. It is because that hardness, flexural strength, and fracture toughness ($K_{IC}$) reduced with the amount of lubricant addition. Blades with $MoS_2$ additive showed higher mechanical properties than those with graphite additives when the same amount of the lubricant additive in wt.% was added. Due to the lower density of graphite than $MoS_2$, higher volume fraction of graphite could result in stronger effect on lowering electric power consumption by reducing the friction between blade and work piece however increasing wear rate due to the reduction in strength and fracture toughness. Adhesive wearing mode of micro blade could be remarkably improved by the addition of graphite as well as $MoS_2$.

가금육의 이용과 가공기술 (Use of Chicken Meat and Processing Technologies)

  • 안동욱
    • 한국가금학회:학술대회논문집
    • /
    • 한국가금학회 2003년도 국제 심포지움
    • /
    • pp.67-88
    • /
    • 2003
  • 과거 20∼30 년 동안에 계육이나 칠면조육과 같은 가금육의 소비가 급성장하였는데 이렇게 되기까지는 매우 저렴한 가금육 가격, 많은 제품의 연구와 개발, 소비자들의 기호에 맞는 가금육의 특성, 소비자의 요구에 부응, 가금산업의 계열화와 통합, 가공에 관련된 장비들과 기술, 그리고 공격적인 마케팅 등과 같은 여러 요인들이 작용하였다. 그간에 연구 개발되어 활용된 가공기술로는 가금육의 성형/재구성, 텀블링, 염지, 훈연, 마사지, 염지액 주입, 향신료첨가, 유화, 빵가루도포, 액상도포, 종절, 절단 그리고 급속냉동과 같은 것들이 있다. 이처럼 발달된 가공기술들은 정육과 부분육 모든 부위에 사용되어졌다. 기계적으로 발골한 발골육 및 가슴과 다리 살코기를 이용한 다양한 제품의 개발로 인하여 가금육의 활용도가 더욱 증가하였다. 닭고기 가슴육은 건강식품의 상징이 되었고 고급식당과 요식업계에서 빠지지 않는 중요한 메뉴가 되었다. 그러나 다리, 날개, 북채와 같은 적육부분을 이용한 제품의 개발과 이용은 상대적으로 높은 지방함량 때문에 제한받아 왔다. 현재 대부분의 닭고기 제품은 구이용이나 인스턴트 제품 형태로 가공되어져서 판매되고 있다. 닭고기의 품질에서 중요한 문제는 비염지조리 가슴살에서 핑크색을 띠는 문제, 지방 산화, 이취, 가슴육에서의 PSE 발생 그리고 안전성과 같은 것들이 있다. 새로운 가공기술을 이용하여 신선육과 조리된 가금육의 품질과 안전성을 보증하기 위해서는 지금까지 행하여져 왔듯이 향후 끊임없는 연구개발이 중요하다고 할 수 있다. 특히, 신선육과 익힌 가금육의 방사선 조사의 응용이 향후 5 년 이내에 점차 증가하게 될 것으로 생각된다. 또한, 시장 점유율에서 인스턴트 식품용 육제품이 차지하는 비율이 점차 증가할 것이다. 또한 부분육을 이용한 완전제품, 적색육제품, 유기농이나 별미식 제품과 같은 형태의 다양한 포장육 제품이 도입 될 것으로 생각되어진다.e in vitro SPF test method will be able to be used as an alternative method for in vivo SPF in case of lotion and cream. replica. A statistically significant improvement of Star Fruit Leaf Extract BG30-treated site was seen in decreased wrinkles. Star Fruit Leaf Extract BG30 results in clinically visible improvement in wrinkling when used topically for 5 weeks. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너만의 시각을 검증했기 때문에 해석에서 유의할 필요가 있다. 또한 타당성확보 노력을 기하였지만 측정도구 면에서 엄격한 개발과정을 준수하지는 못했다. 향후에는 모바일 컨텐츠 파트너의 기업의 특성을 조사하여 관계성 변수와의 상호관련연구를 진행할 필요가 있다. 관계기간, 의존성, 거래처의 단/복수여부, 서비스 범주 등의 제반 변수를 고려하여 이러한 변수가 양사와의 관계성 변수에 어떤 영향이 있는가를 검증할 필요가 있다. 또한 신뢰, 결속 등 다차원의 개념에 대한 심도 깊은 연구와 최근 제기되고 있는 이론의 확대도 필요하다

  • PDF