• Korean Journal of Medicinal Crop Science
• /
• v.12 no.6
• /
• pp.483-489
• /
• 2004

Monthly changes of underground growth and ethanol extract content was investigated from April to September in Korean ginseng of 4, 5 and 6 year-old. Taproot's length was repeatedly reduced and recovered without increasing by growth duration, while it's diameter was gradually increased until September of harvest time. Top weight reached to the peak on July, and decreased gradually until harvest time. Root weight of 4, 5 and 6-year-old ginseng was decreased on May, but increased gradually until harvest time except 6-year-old ginseng decreased after July. Relative growth rate (RGR) of root per plant was low on May and August, but high on June, July, and September in 4, 5 and 6 year-old ginseng. RGR of 4 and 5-year-old ginseng in each lateral and fine root showed distinct changes by month, while those showed little seasonal changes in 6 year-old ginseng. Ratio of root above 60g on september was 23%, 60% and 69%, respectively, among 4, 5 and 6 year-old ginseng. Moisture content of root was gradually decreased until september without significant difference from July to september in 4, 5 and 6 year-old ginseng, and its descending order on september was 4, 5 and 6 year-old ginseng. Hardness of taproot was decreased on May, but increased until september in 4 and 5 year-old ginseng, while that of 6 year-old ginseng was gradually decreased from August to september. Extract content of 4, 5 and 6 year-old ginseng in taproot and lateral root was distinctly decreased from March to June, but gradually increased until September. Although extract content of March and May in 4 year-old ginseng on showed higher than that of 5 and 6 year-old ginseng, it of September didn't show significant difference among 4, 5 and 6 year-old ginseng.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.259-265
• /
• 2010

Purpose: This study was aimed to evaluate the effect of different sizes of $\beta$-TCP/ HA particles on vertical bone augmentation using titanium mesh in the cranium of rabbits. Materials and methods: Six white rabbits weighing 5kg were used. Four circular grooves of 6mm diameter were made by trephine, and five small holes were drilled in the inner surface of each circular gooves. Different sizes of grafts (small 0.3 - 0.5 mm, medium 0.5 - 1.0, large 1.0 - 2.0 mm) were placed respectively in the experimental groups. Titanium mesh (height 3 mm, width 6 mm) was placed. After 8weeks healing period, the rabbits were euthanized, and the specimens were prepared for histological findings. New bone formation and remaining graft area were measured to calculate the ratio of areas occupying the inner space of titanium mesh. Mann-Whitney U-test and Wilcoxon signed rank-test were used for statistical analysis ($\alpha$ = .05). Results: The experimental groups with $\beta$-TCP/HA graft showed a significantly higher new bone formation (P = .003). Comparing different sizes of $\beta$-TCP/HA, there was no statistical difference in terms of new bone formation. The vertical bone formation (i.e. new bone and graft area) was significantly greater in $\beta$-TCP/HA groups (P = .001). In comparison between different sizes of $\beta$-TCP/HA, medium size group had significantly greater area than large particle size group (P = .039). Conclusion: The use of $\beta$-TCP/HA with titanium mesh showed a higher vertical bone formation, particularly the medium sized $\beta$-TCP/HA particles (0.5 - 1.0 mm) produced better results in vertical bone augmentation.

• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.77-81
• /
• 2010

The effects of $CO_2$ concentration on fruit-body formation and yield of Pleurotus ferulae (KME65003) mushroom were examined in the growing facilities for bottle cultivation. The $CO_2$ concentration levels in the growing facilities were 500 ppm, 1000 ppm, 1500 ppm and 2000 ppm of $CO_2$, controlled by different ventilation amount. Yield of fruit body was highest of 102.4 g/bottle at 1000 ppm treatment and lowest of 75.1 g/bottle at 2000 ppm. As the $CO_2$ concentration increased up to 2000 ppm, the first pinhead formation and fruit-body growing period took longer, so total growing period took 16 days at 500 ppm, but 23 days at 2000 ppm. The number of pinhead formation was highest of 12.2/bottle at 1500 ppm and valid stipes was highest of 2.8/bottle at 1000 ppm. Fruit body characteristics such as pileus and stipe diameter, and stipe length were not significant at different $CO_2$ concentration. The fruit body ratio of 20~50 g range among the whole fruit body which was classified by weight was highest of 60.3% at 1000 ppm. As a result, the suitable $CO_2$ concentration of growth and yield of Pleurotus ferulae was showed as 1000 ppm.

• Childhood Kidney Diseases
• /
• v.13 no.2
• /
• pp.215-221
• /
• 2009

Purpose : Thymus is a lymphoproliferative organ that changes size in various physiological states in addition to some pathological conditions. Thymus is susceptible to involution, and shows a dramatic response to severe stress. Thymic measurements may be helpful in various diseases. UTI (urinary tract infection) is most common bacterial infection in infants and VUR (vesicoureteral reflux) is a common abnormality associated with UTI. In our study, the size of thymus was compared on the premise that a greater stress is exerted on the body when UTI is accompanied by VUR, than when occurs on its own. Methods : Thymic size was measured on standard chest anteroposterior radiographs and expressed as the ratio between the transverse diameter of the cardiothymic image at the level of the carina and that of the thorax (CT/T). The medical records of 99 febrile urinary tract infection infants without other genitourinary anomalies except VUR were reviewed retrospectively. Results : Among 99 patients with febrile UTIs, 25 were febrile UTI without VUR and 74 with VUR. For the UTI with VUR group, there was a significant decrease in the thymic size compared to the those without VUR group ($0.382{\pm}0.048$ vs $0.439{\pm}0.079$, P<0.05). However, there were no differences in the duration of fever and WBC, CRP between the UTI with VUR and UTI without VUR. In addition, there were no differences in the cardiothymic/thoracic ratios between renal defects and renal scars in febrile UTI patients. Conclusion : The results of this study show that the shirinkage of thymus was more frequently found in the UTI patients with VUR. Therefore, awareness of the risks associated with thymic size is important for the appropriate work up and management of UTI patients.

• Journal of Yeungnam Medical Science
• /
• v.13 no.2
• /
• pp.199-210
• /
• 1996

Infantile hypertrophic pyloric stenosis(IHPS), which occurs three of 1,000 live births, is a major cause of nonbilious vomiting of early infancy but its etiology and pathogenesis are still obscure. The operation of pyloromyotomy as described by Ramstedt in 1912 remains the standard of care for the treatment of IHPS. From January 1993 to October 1996, 35 infants with IHPS were surgically treated and the following results were obtained. 1. Thirty-five patients comprised 32 males and 3 females, and the ratio of male to female was 10.7:1. 2. The most prevalent age group was between 2 weeks and 8 weeks. 3. Of 35 infants, first born babies were 23 cases(65.7%). 4. Breast feeding was in 23 cases(65.7%). 5. The body weight percentile at admission was lower than 50 percentile in all 35 cases. 6. Onset of symptoms was predominantly between 1week and 2 weeks in 11 cases(31.4%). 7. All had a history of nonbilious vomting, generally projectile in nature. 8. In the measured serum electrolytes, hypokalemia was noted in 9 cases(25.7%), hypochloremia was observed in 14 cases(40.0%). 9. In the preoperative ultrasonography, the average muscle thickness, diameter, and length of the pylorus were 6.2mm, 12.1mm, and 17.9mm, respectively. 10. Among 35 cases, significant sonographic criteria of IHPS, muscle thickness of 5mm or more, were noted in 26 cases(83.9%). 11. A total of seven associated anomalies were noted in six patients. 12. All 35 cases were treated with Fredet-Ramstedt pyloromyotomy. 13. There were postoperative complications of wound infection in 2 cases. Intermittent nonprojectile vomiting was presented in 8 cases(22.9%) after operation, but one of them was relieved in 13 days and the rest were relieved within one week by adjustment of oral intake.

• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2003

Purpose : The purpose of this study was to analyze the effect of a Linear accelerator based Photon Knife Radiosurgery System developed by the staff of Keimyung University Dongsan Medical Center for the treatment of cerebral arterlovenous malformation Material and Methods : Between December 1993 and October 2000, 30 patients with cerebral arteriovenous malformation (AVM) were treated with the Linac based Photon knife Radlosurgery System In the Department of Therapeutlc Radiology at Keimyung University Dongsan Medical Center. The median age was 34, ranging from 7 to 63 years, with a 2 : 1 male to female ratio. The locations of the AVM nidi were the frontal lobe (motor cortex), parletal lobe, and the thalamus, In that order. The diameters of the AVM nidi ranged 1.2 to 5.5 cm with a mean on 2.9 cm, and target volumes of between 0.5 and 20.5 cc, with a mean of 5.8 cc. The majority of patients received radiation doses of between 1,500 and 2,500 cGy, w14h a mean of 2,000 cGy, at 80% the isodose line. Twenty-five patients were treated with one isocenter, 4 with two, and 1 with four. The follow-up radiological evaluations were peformed with cranial computed tomogram (CT) or MRI between 6 month and one year interval, and if the AVM nidus had completely disappeared in the CT or MRI, we confirmed thls was a complete obliteration, with a cerebral or magnetic resonance angiogram (MRA). The median iollow-up period was 39 months with a range of 10 to 103 months. Results : Twenty patients were radloiogicaiiy followed up ior over 20 months, with complete obliteration observed in 14 (70%). According to the maximal diameter, all four of the small AVM (<2 cm) completely obliterated, 8 of the 10 patients with a medium AVW (2~3 cm) showed a complete obliteration, and two showed partial obliteration. Among the patients with a large AVM (>3 cm), only one showed complete obliteration, and S showed partial obliteration, but 3 oT these underwent further radiosurgery 3 years later. One who followed up for 20 months fellowing further radiosurgery eventually showed complete obliteration. Ten patients with seizure symptoms had no recurrent seizure due to radiosurgery and medication. One of the eleven patients who suffered intracranlal bleeding developed further bleeding at 9 and 51 months fellowing the radiosurgery although complete obliteration was eventually observed and the patient was managed in hospital then recovered. No patient suffered severe complications fellowing the radiosurgery. Conclusion : The radiosurgery with Linac-based Photon knife radiosurgery system, developed by the staff at our hospital, is a safe and effective treatment for AVM patients having diameters or volumes of less than 3 cm or 10 cm$^{3}$, respectively, located In Inoperable areas or who refused neurosurgery. We suggest that staged AVM radiosurgery may initially be considered, if the AVM target volume is above 10 cm$^{3}$

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.147-153
• /
• 2007

Kaolinite [$Al_2Si_2O_5(OH)_4$] was successfully synthesized by a hydrothermal process from amorphous $Al(OH)_3$ and $SiO_2$ at $230^{\circ}C$ under the pressure of $30 kg/cm^2$. The experiments were performed varying temperatures ($180{\sim}280^{\circ}C$), pressure ($10{\sim}60kg/cm^2$), chemistry ($Al_2O_3/SiO_2 = 0.5{\sim}0.38$) and pH ($0.3{\sim}9.5$) of the solution. The autoclaving was carried out in a closed stainless steel vessel. Kaolinite appears from the starting composition of $Al_2O_3/SiO_2= 0.5$ with boehmite and was stable as a single phase with the composition of $Al_2O_3/SiO_2=0.45$. Boehmite was a stable phase below $200^{\circ}C$ for the 240 h period of autoclaving, but kaolinite appeared even in 20 h at $230^{\circ}C$. The single kaolinite phase of a good crystallinity was observed at pH ranging 2 to 6. That indicates that pH is one of the most critical parameters for the successful formation of kaolinite. The optimal molar ratio of $Al_2O_3$ to $SiO_2$ was determined to be 0.45. The XRD pattern of the synthesized kaolinite coincided with that of natural one and its morphology was the cluster type of the kaolinite crystals (diameter = ${\sim}3{\mu}m$), irrespective of starting material, composition and temperature.

• The Korean Journal of Malacology
• /
• v.17 no.1
• /
• pp.45-55
• /
• 2001

Gametogenes, reproductive cycle, first sexual maturity(biological minimum size), sex ratio and larval development of the marsh clam Corbicula japonica were investigated monthly by histological observations. Samples were collected in brackish water of Gokgang stream, Kyungsangbuk-Do, Korea, from August 1997 to July 1998. Sexuality of Corbicula japonica is dioecious and the species are an oviparous clam. The gonads are irregularly arranged from the sub-region of mid-intestinal gland in visceral cavity to reticular connective tissue of foot. The ovary is composed of a number of ovarian sac which are branched arborescent. Oogonia actively proliferate along the germinal epithelium of ovarian sac, in which young oocytes are growing. The testis is composed of a number of testicular tubules, and the epithelium of the tubule has function of germinal epithelium, along which spermatogonia actively proliferate. A great number of undifferentiated mesenchymal tissue and eosinophilic granular cells are abundantly distributed between developing oocytes and spermatocytes in the early developmental stages. With the further development of the ovary and testis these tissue and cells gradually disappear. Then the undifferentiated mesenchymal tissue and eosinophilic granular cells are considered to be related to the growing of the oocytes and spermatocytes. The spawning period is from July to September, and the main spawning occur between July and August when seawater temperatures reach above 22$^{\circ}C$. The reproductive cycle of this species can be divided into five successive stages; early active (February to April), late active (May to July), ripe (June to September), partially spawned (July to September), degenerative (September to October) and resting stage (October to February). Percentages of first sexual maturity of female and male clams ranging in length from 10 mm to 12 mm are over 50% and 100% for clams over 16.0 mm in shell length. Fertilized eggs or Corbicula japonica were 80-90 ${\mu}{\textrm}{m}$ in diameter. In the early embryonic development of C. japonica, the appearance of polar body, trochophore and D-shaped veliger were observed around 40 min., 27 hours and 4 days after spawning, respectively, at a water temperature of 26.5-28.$0^{\circ}C$. The size of larvae of early umbo stage was about 185-210 ${\mu}{\textrm}{m}$ in shell length, 160-180 ${\mu}{\textrm}{m}$ in shell height around 7 days after fertilization. The correlation of relative growth between the culture day (D) and shell length (SL) was expressed by the following simple formula from D-shaped veliger to metamorphosing stage; SL = 13.300D + 209.36($r^2$= 0.9078).

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.381-391
• /
• 2001

In orthodontic patients, frequently, amalgam restorations are present on the buccal surface of molars. The ability to successfully bond orthodontic brackets and buccal tubes to amalgam restorations would therefore be of clinical value. But the bond strength to total amalgam surface is probably not critical in most instances. Because there is usually a considerable amount of sound enamel surrounding a buccal amalgam filling. The purpose of this study was to evaluate the bond strengths of orthodontic brackets according to surface treatments and size of amalgam restorations. Eighty tooth specimen were assigned to four groups according to amalgam size-1.5mm, 2.0mm, 2.5mm, 3.0mm diameter-and then divided into two groups : one half was sandblasting group the other half was no sandblasting group. After Bracket bonding, shear bond strength for each specimen was determined and bond failure patterns was evaluated. 1. Shear bond strength of amalgam size 1.5mm group was significantly higher than that of the other groups. (p<0.05) 2. There was no significant difference in the bond strength produced by sandblasting. (p<0.05) 3. Shear bond strength of G and H group of which amalgam restoration ratio to the bracket base sizes were $61\%$ were significantly decreased $50-60\% level of that of control group. (p<0.05) 4. There was positive correlation between sandblasting and mARI. (p<0.05) The results of the present study indicate that it may be feasible to bond orthodontic bracket clinically successfully to amalgam restoration with conventional orthodontic resin when its size is less than $50\%$ of that of bracket base.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.169-175
• /
• 2012

Purpose: In this study, brazing characteristics of $ZrO_2$ and Ti-6Al-4V brazed joints with increasing temperature were investigated. Materials and methods: The sample size of the $ZrO_2$ was $3mm{\times}3mm{\times}3mm$ (thickness), and Ti-6Al-4V was $10mm(diameter){\times}5mm(thickness)$. The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under $5{\times}10^{-6}$ torr atmosphere, while the brazing temperature was changed from 700 to $800^{\circ}C$ for 30 min. Results: The experimental results shows that brazed joint of $ZrO_2$ and Ti-6Al-4V occurred at $700-800^{\circ}C$. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of $ZrO_2$ and Ti-6Al-4V bonded interfaces decreased with brazing temperature. Conclusion: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between $ZrO_2$ and Ti did not occur enough.