• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1612-1617
• /
• 2004

Unbalance analysis is essential in the rotor system. However, some problems still remain in the aspects of computational efficiency and accuracy. In the present paper a new method is proposed for estimating the mass unbalance of a rotating shaft by using the vibration signals. This is an advanced new method for the detection of a mass unbalance and its phase position. Based on the signal processing with FFT, an estimator is designed to detect the mass of unbalance. And an improved Lissajous diagram is also introduced with statistical analysis, which make it possible to compute the phase position of the mass unbalance efficiently and arranged at a certain location of the shaft. The proposed method is demonstrated and validated through several test examples.

• 시스템엔지니어링학술지
• /
• 제11권2호
• /
• pp.75-83
• /
• 2015

This paper describes modeling & simulation(M&S) model for dynamic analysis of helicopter rotor blades. Simulation model is developed using Dymola tool which implements the open source language - Modelica. Modelica is appropriate for developing multibody dynamic analysis model. To develop an M&S model efficiently, model based systems engineering(MBSE) is applied. Some diagrams such as requirement diagram, block definition diagram and sequence diagram etc. are drawn to capture the concept of M&S model. This activity is done utilizing the open source tool - Papyrus.

• 소성∙가공
• /
• 제8권5호
• /
• pp.482-490
• /
• 1999

7000 series Al alloy with good mechanical properties has been focused with tendency to reduce the components weight of aircraft and automobile. However, it is difficult to manufacture a sound extruded product because of segregation, grain growth, casting defect, surface defect, decreasing extrudability and so on. The objective of this study is to manufacture a new 7000 al alloy more than the extrudability of A7N01 and A7003 through controlling the weight (%) Mg, Zn, Si. Hot extrusion experiments on the axisymmetric rod are performed in 500℃ and also performed analysis of the same process using unmerical analysis method, a coupled rigid-thermoviscoplastic finite element method. Extrusion limit diagram was obtained for the developed alloy by FE-simulation in order to define the relationship of extrusion speed and initial billet temperature.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1285-1289
• /
• 2008

Increasing the flood control capacity's link that is enforcing to existing dam by unusual change of weather, While build planing construction by exiting spillway of tunnel type to dam, could know that part bed rock is formed as is different with design. Grasped topography of research area and geology state to definite distribution aspect of different bed rock, Place that achieved Surface geological Survey and correct Survey is difficult in some section enforced Electrical resistivity dipole-dipole investigation. Grasped stratigraphy distribution confirmation and fracture or weathering zone making out siding 2D-Resistivity Electrical resistivity diagram and Reverse analysis diagram, examining closely soil weathered rock rock's distribution state, established stability countermeasure plan

• 연구논문집
• /
• 통권22호
• /
• pp.21-26
• /
• 1992

Dynamic analysis is important in structural design of SCARA or articulated type industrial robots and is' usually done to main three axes. In this paper, robot arm dynamics was analyzed using FBD(free body diagram). Though the proposed scheme becomes complex as DOF(degree of freedom)increases, it allows to see types and directions of forces and moments acting on the body. Therefore, the strength analysis of robot arm can be done relatively easy in a case of either closed or open loop chain. This method can be used for obtaining dynamic simulation at off-line programming system and calculating required torques at joints at on-line system.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.52-60
• /
• 1999

By implementing the Systems Engineering process for the aircraft preliminary design, functional analysis study is performed, hence Functional Interface Data Flow(FIDF) and Functional Flow Block Diagram(FFBD) are generated. Based on FIDF and FFBD, allocable and non-allocable design/performance/RM＆S requirements are allocated to the appropriate levels. Weight and cost tracking and design margin management methodologies are studied and implemented for the balanced aircraft design.

• 한국안전학회지
• /
• 제37권2호
• /
• pp.18-27
• /
• 2022

Construction accidents are difficult to prevent because several different types of activities occur simultaneously. The current method of accident analysis only indicates the number of occurrences for one or two variables and accidents have not reduced as a result of safety measures that focus solely on individual variables. Even if accident data is analyzed to establish appropriate safety measures, it is difficult to derive significant results due to a large number of data variables, elements, and qualitative records. In this study, in order to simplify the analysis and approach this complex problem logically, data preprocessing techniques, such as latent class cluster analysis (LCCA) and predictor importance were used to discover the most influential variables. Finally, the correlation was analyzed using an alluvial flow diagram consisting of seven variables and fourteen elements based on accident data. The alluvial diagram analysis using reduced variables and elements enabled the identification of accident trends into four categories. The findings of this study demonstrate that complex and diverse construction accident data can yield relevant analysis results, assisting in the prevention of accidents.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.208-216
• /
• 2014

In case of any coastal ocean near the mouth of huge rivers, low salinity water can be formed due to its large amount of freshwater discharge. For the acoustic analysis on the low salinity environment, some oceanographic data of the East China Sea and the Atlantic Ocean were collected through KODC (Korea Oceanographic Data Center) and NODC (National Oceanographic Data Center) online service. In this paper, the T-S gradient diagram is introduced to show a relation between the gradients of temperature and salinity in view of acoustic surface channel formation. Existence of haline channel, quantitative contribution of gradients of salinity and temperature, effectiveness of the channel formation can be known by the T-S gradient diagram. After applying the collected data into the diagram, tropical regions of the Atlantic Ocean show strong haline channel due to its nearly invariant temperature and drastic change of salinity with depth. The averaged transmission loss in the channel is about 5.7 ~ 7.5 dB less than that out of the channel by the results of acoustic propagation model (RAM: Range independent Acoustic Model). On the other hand, the East China Sea and temperate region of the Atlantic ocean have weaker haline channel with less difference of the averaged transmission loss between in and out of the channel as 3.2 ~ 6.0 dB. Although data samples used in this study have limitation to represent the general physical structures of the three ocean regions, the T-S gradient diagram is shown to be useful and acoustic field affected by low salinity environment is investigated in this study.

• 대한교통학회지
• /
• 제22권3호
• /
• pp.95-105
• /
• 2004

교통기본도(Fundamental Diagram)는 교통류와 관련된 다양한 연구에서 중요한 요소로 생각되어져 왔다. 지금까지 다양한 형태의 교통기본도가 제시되었고 실제 데이터를 가장 잘 설명하는 교통기본도의 형태에 대해 많은 논의가 이루어졌지만, 서로 다른 형태의 교통기본도를 결정하는 원인에 대한 분석이 충분히 이루어지지 않고 있다. 본 연구는 서로 다른 지점과 교통조건에서 운전자의 행태차이를 이해하는데 중요한 파라메타로서 차간시간(time gap)을 소개하였고, 차간시간과 교통기본도의 형태와의 연관성을 분석하였다. 개별차량 검지기 자료를 토대로, 차간시간은 확률분포를 따르고 평균값은 지점에 따라 변화하는 것과 다른 통행속도에서 다른 차간시간을 보이는 것으로 분석되었다. 또한, 차간시간-속도 분포도의 3가지 형태들이 확인되었고 이것들은 교통류율-밀도 교통기본도로 전환되면 기존의 Greenberg, 역 ${\lambda}$, 전도된 V형태의 교통기본도와 일치하였다. 본 연구는 미시적 교통변수인 차간시간을 이용하여 교통기본도의 특징을 해석하였고, 운전자들의 행태에 관한 특성을 교통조건과 도로의 기하구조에 따라 설명하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.897-898
• /
• 2011