• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.287-288
• /
• 2006

This paper introduces an approach of method to compensate accuracy error of diagonal direction. The measurement of squareness error is an important parameter in performance test of two axis Linear Motor and this exerts influence on accuracy error of diagonal test. However, previous knowledge management approaches are limited in deviation measurement of optical axis or restrictive elements of diagonal measurements using laser interferometer. But this proposed method calculated diagonal accuracy error which was occurred by squareness error and compensated squareness error using orthogonal correction method of PMAC. From this result, diagonal accuracy error is significantly reduced. This experimental results show that geometric error of squareness error is easily corrected by dynamic coordinate correction.

• 대한물리의학회지
• /
• 제11권2호
• /
• pp.25-31
• /
• 2016

PURPOSE: The purpose of this study was to compare the trunk muscle activity according to the direction of upper extremity lifting using elastic band. METHODS: Thirty three healthy individuals participated in this study. Each subject performed upper extremity lifting using elastic band on two different directions (straight and diagonal). And then we compared the muscle activity of respective trunk muscles of both directions. In order to examine the muscle activity of trunk muscle, we used the electromyogram to measure peak and mean torque in shoulder 90 degree flexion with sitting position. Electromyographic activities were recorded from the external oblique, internal oblique, rectus abdominis, and erector spine muscles during upper extremity lifting. RESULTS: As a result, first, there was significant difference between two directions. The muscle activity of ipsilateral external oblique and contralateral internal oblique is significantly increased in both straight and diagonal directions (p<0.05). Second, the muscle activities of external oblique and internal oblique of both side showed significant difference in diagonal direction (p<0.05). Third, the muscle activity of erector spine of both side showed significant difference in straight direction (p<0.05). CONCLUSION: Through this study, it is important that implement diagonal direction exercise at sitting positions to help increasing muscle activity of ipsilateral external oblique and contralateral internal oblique on patients when activating the trunk muscle or stabilizing the trunk.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.206-209
• /
• 1993

The main purpose of this paper is to verify the effectiveness of a high resolution direction finding method, so called the‘averaged MUSIC’. This method uses a new sample array covariance matrix that consists of diagonal components obtained by taking averages of the diagonal component values of the sample covariance matrix for the MUSIC. The paper shows that the proposed method performs higher resolved direction-of-arrival estimation and better resolution probability than the MUSIC in such cases as low signal-to-noise ratio, when the number of sensors used is finite, based on the statistical analysis.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권1호
• /
• pp.61-64
• /
• 2018

In this paper, a pixel value prediction algorithm using edge components in three directions is proposed. There are various directional edges and similarity between adjacent pixels in natural images. After detecting the edge components in the x-axis direction, the y-axis direction, and the diagonal axis direction, the pixel value is predicted by applying the detected edge components and similarity between neighboring pixels. In particular, the predicted pixel value is calculated according to the intensity of the edge component in the diagonal axis direction. Experimental results show that the proposed algorithm can effectively predict pixel values. The proposed algorithm can be used for applications such as reversible data hiding, reversible watermarking to increase the number of embedded data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.824-828
• /
• 2000

Prior to the downloading of the NC codes to a machining center, the NC tool-path can be verified in a computer. The Z-map is one of the tools for the verification of NC tool-path. The Z-map is a two dimensional array in which the height values of the Z-axis direction vectors are stored. The Z-axis direction vectors are arranged in a rectangular grid pattern on the XY plane. The accuracy of the simulation comes from the grid interval. In the rectangular Z-map, the distances between the grid points are different. The distance in diagonal direction is larger than those in X or Y axis directions. For the rendering of the Z-map, a rectangular grid is divided into two triangular facets. Depending on the selection of a diagonal, there are two different cases. In this paper, triangular Z-map, in which the Z-axis direction vectors are arranged in a triangular grid pattern on XY plane, is proposed. In the triangular Z-map, the distances between grid points are equal. There is no ambiguity to make triangular facets for the rendering.

• 복식문화연구
• /
• 제25권1호
• /
• pp.64-74
• /
• 2017

The purpose of this study is to identify the sensibility images when the direction and width of stripes change on semi-tight skirts. The researcher made 12 stimuli consisting of images of skirts with a combination of six stripe directions and two stripe widths. The images were assessed by 126 subjects who were students majoring in apparel. Three sensibility image factors were found: personality, attractiveness, and activity. Images of skirts with different stripe directions were perceived as having significant differences among these factors. Stripe widths of 1.5cm and 3cm in upward diagonal, vertical side line, and downward diagonal directions influenced the personality factor. Diagonal stripes with a width of 1.5cm positively influenced attractiveness and activity. Stripes in a vertical direction increased attractiveness when the stripe width was 1.5cm rather than 3cm. Although the interaction of stripe direction and width significantly influenced perceptions of attractiveness and activity in images of semi-tight skirts, they did not significantly influence personality. In accordance with the analysis, stripe direction was significantly different for all factors. This analysis indicated that each factor has its own independent influence. Stripe width had major independent effects, showing significance in attractiveness and activity. However, personality did not indicate any significant difference. The results of this study will help women select suitable clothing according to their individual preferences and body shapes by influencing how images are depicted because women will be able to use the images to estimate their body images when the skirts are put on.

• Structural Engineering and Mechanics
• /
• 제81권2호
• /
• pp.131-146
• /
• 2022

This study highlights the accuracy of several single strut models to predict the global response of infilled reinforced concrete (R/C) frames. To this aim, six experimental tests are selected to calibrate the numerical modeling. The width of the diagonal strut is calculated using several macro models from the literature. The mechanical properties of the diagonal strut are determined by using two methods: (a) by subtracting the bare frame response from that of the infilled frame, and (b) by calculating the axial strength in the diagonal direction. A combination between the different width and the axial force models is carried out to study the effects of each parameter on global response. Non-linear pushover analyses are conducted using SAP2000. The results indicate the accuracy of the macro-modeling approach to predict the behavior of the infilled frames.

• 한국정밀공학회지
• /
• 제31권2호
• /
• pp.113-117
• /
• 2014

Laser Assisted Machining (LAM) was often used in process of difficulty-to-cut materials. In previous study, Laser assisted machining was a straight path processing using 1-axis manipulator in laser module. But 1-axis manipulator in laser module was able to process only straight path. So, in this study, laser module in laser assisted machining equipped to 2-axis manipulator. 2-axis manipulator has two motors. First motor is machining direction motor and second motor is Vertical Motor. Machining direction motor rotates in the direction of machining and vertical motor rotates vertical direction in the direction of machining. Machining path of laser assisted machining was considered diagonal path and curved path of laser heat source. This study calculated the 2-axis manipulator's rotation angle in diagonal path and curved path.

• 디지털융복합연구
• /
• 제13권9호
• /
• pp.259-267
• /
• 2015

본 논문에서는 직선을 판별하는 판별방법과 또한 직선으로 판정되는 경우 직선의 8가지 방향에 대한 판정을 위하여 좌표정보와 삼각함수 성질을 이용하여 직선 8반향 알고리즘을 제안하였다. 본 실험은 각 동작 별로 100회씩 총 800회를 실험 하였으며, 본 논문에서 제안한 알고리즘을 통한 정확도는 왼쪽 위로의 대각선 방향이 92%로 가장 높았으며 왼쪽 방향, 오른쪽 위로의 대각선 방향과 오른쪽 아래로의 대각선 방향이 모두 82%로 가장 낮은 인식률을 나타내었다. 이 방법은 기존 방법과는 다르게 학습과정 없이 이미지 처리를 통해 얻은 좌표 정보만으로 손 제스처 인식이 가능하다는 것을 보여준다.

• 터널과지하공간
• /
• 제22권3호
• /
• pp.173-180
• /
• 2012

본 연구에서는 방사성 폐기물 처분장 설계 시 필요할 수 있는 공기 유동 방향의 제어에 이점을 가진 Diagonal 환기 회로에 대해서 연구하였다. 연구 결과, Diagonal 환기 회로에서도 Diagonal 갱도(Branch)로 유입시킬 공기량과 공기 유동 방향을 미리 정한다면 다른 직 병렬 회로와 마찬가지로 수식이나 프로그램에 의한 공기량을 산정할 수 있음을 알 수 있었다. 이를 적용하기 위해 앞으로 처분될 고준위 방사성 폐기물의 추정 데이터를 통해 Diagonal 환기 회로와 병렬식 환기 회로가 적용된 고준위 방사성 폐기물 처분장의 설계안을 마련하였다. 마련된 설계안 별 비교 및 예상 운영 결과를 얻기 위해서 환기 네트워킹 프로그램인 Ventsim 프로그램을 통해 환기 네트워크 시뮬레이션을 수행하였다. 그 결과 저항 증가가 큰 수치로 발생할 것으로 예상되었던 Diagonal 처분장은 병렬식 환기 회로가 적용된 처분장과 비교하였을 때, 팬 압력은 1570 pa, 총 유량 84 $m^3/s$, 팬 효율 76.4%, 팬 소요 전력 181.2 kW 및 연간 팬 운영 비용 178,710,838원으로 압력과 유량값에서 최대 8% 정도의 차이를 보였고, 운영 비용 측면에서는 1.5%의 차이를 보였다.