• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.343-348
• /
• 2013

In line with the advances in factory automation, various pieces of equipment are now operated in batch processes controlled by computers. However, many kinds of faults can occur in complicated and large systems, which can result in low productivity and economic loss. The reliability and safety of systems have been studied because of the difficulty of determining the severity and location of faults. Therefore, it is necessary to detect and diagnose such faults in order to guarantee the reliability and safety of the equipment. In this paper, a diagnosis method for the ball bearings of a hydraulic pump is applied using a vibration signal for the maintenance of injection molding equipment. The bearings' defects are selected as a main failure mode through a failure mode and effect analysis (FMEA). Usually, there are nonlinear and impulse components of vibration in a ball bearing with faults. For the effective fault diagnosis of a ball bearing, nonlinear diagnostic methods and time-frequency analysis are applied, in addition to the methods currently used, such as power spectrum, time series analysis, and statistical methods. As a result of this study, a failure diagnosis system is provided that is useful even for non-experts. This is a condition-based method that makes it possible to resolve problems in a timely and economical way, in contrast to the prior method, which required regular but wasteful maintenance based on the experience of expensive external experts.

• 대한전자공학회논문지TE
• /
• 제37권2호
• /
• pp.41-53
• /
• 2000

본 논문에서는 뉴로-퍼지 방법을 이용한 한방 맥진 및 양도락 진단 알고리즘을 제안하고 DSP보드를 중심으로 한 실시간 진단 시스템을 구현한다. 맥진은 환자의 손목에 있는 촌관척부에 부착한 맥진 Probe를 통해 맥진카드의 3 채널로 신호가 입력되도록 하여, 1차적으로 좌부맥, 좌침맥, 우부맥, 우침맥으로 나누어 촌관척 3부분을 동시에 실험하고, 2차적으로는 촌관척 중 1부분씩 개별적으로도 실험을 행할 수 있도록 한다. 실제 실험을 통하여 어느 맥진 Probe로도 맥진 신호가 세밀하게 검출됨을 확인한다. 양도락 진단에서는 전기자극기에서 발생된 펄스를 인체의 일정부위에 주입하면 12경맥의 대표측정점에 부착된 전극을 통해 응답신호를 검출해 내도록 한다. 실험은 ① 1채널씩 검출, ② 2채널(좌, 우)씩 검출, ③ 6채널(좌수, 우수, 좌족, 우족)씩 4단계로 검출, ④ 24채널 동시 검출 후, 1차적으로 퍼지진단을 행하고, 2차적으로 퍼지진단값을 신경회로망의 입력으로 이용하여 신경회로망 훈련을 행하였다. 그리고 임의의 환자에게서 측정한 검출값을 곧바로 기 훈련 된 양도락 신호의 패턴인식을 행하여 양도락 신호의 뉴로-퍼지 진단이 잘 수행됨을 확인하였다.

• Parasites, Hosts and Diseases
• /
• 제52권4호
• /
• pp.377-381
• /
• 2014

Microscopy is considered as the gold standard for malaria diagnosis although its wide application is limited by the requirement of highly experienced microscopists. PCR and serological tests provide efficient diagnostic performance and have been applied for malaria diagnosis and research. The aim of this study was to investigate the diagnostic performance of nested PCR and a recently developed an ELISA-based new rapid diagnosis test (RDT), NovaLisa test kit, for diagnosis of malaria infection, using microscopic method as the gold standard. The performance of nested-PCR as a malaria diagnostic tool is excellent with respect to its high accuracy, sensitivity, specificity, and ability to discriminate Plasmodium species. The sensitivity and specificity of nested-PCR compared with the microscopic method for detection of Plasmodium falciparum, Plasmodium vivax, and P. falciparum/P. vivax mixed infection were 71.4 vs 100%, 100 vs 98.7%, and 100 vs 95.0%, respectively. The sensitivity and specificity of the ELISA-based NovaLisa test kit compared with the microscopic method for detection of Plasmodium genus were 89.0 vs 91.6%, respectively. NovaLisa test kit provided comparable diagnostic performance. Its relatively low cost, simplicity, and rapidity enables large scale field application.

• KSBB Journal
• /
• 제26권4호
• /
• pp.352-356
• /
• 2011

The detection of biomarkers is an important issue for disease diagnosis. However, many systems are not suitable to detect the biomarker itself directly. For direct detection of biomarker proteins in human serum, a new affinity-capture method using aptamers combined with the mass spectrometry was suggested. Since signals from protein samples cannot be amplified, modified chromatin immunoprecipitation (ChIP) and subsequent cross-linking with formaldehyde between aptamers and target proteins were used not to lose the captured target proteins, which allowed us to perform a harsh washing step to remove the non-specifically bound proteins. As a model system, a thrombin aptamer was used as a bait and thrombin as a target protein. Using our modified ChIP and affinity-capture method, non-specific binding proteins on the beads decreased significantly, suggesting that our new method is efficient and can be applied to developing diagnosis systems for various biomarkers.

• 한국물환경학회지
• /
• 제28권1호
• /
• pp.18-25
• /
• 2012

For effective watershed management, it is very important to select the tributaries through selection and concentration of targeted tributary catchments for improving water quality within the limited financial conditions. This study introduced the selection and diagnosis procedure of tributary catchments for improving water quality at Chungcheongnam-do based on water quality and flowrate monitoring, stream grouping method. The tributaries with high value of water quality and flowrate were selected for improving water quality according to stream grouping method. The diagnosis of selected tributaries for improving water quality was performed with analysis of the pollution load (generated, discharged, delivered) and point source discharged pollution load density. The plans for improving water quality of tributaries were suggested thorough various diagnosis of tributary catchments. For improving water quality of tributaries in Chungcheongnam-do, the tributary catchments in the Dangjin, Asan, Yesan, Cheonan, Hongseong area should be preferentially considered. The water quality improving plans for those tributary catchments, in accordance with the reduction of sources of pollution by population and livestock, should be established.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제35권8호
• /
• pp.493-500
• /
• 2008

가상 대장 내시경을 위해서 환자 대장 CT 프로파일을 이용한 전자적 장세척 방법을 제안한다. 제안된 방법은 관강 영역을 cubic seeded region growing(SRG) 방법을 이용하여 추출하고, 이에 인접한 tagged material(TM)을 제거한다. TM의 경계에서 Air-TM의 partial volume(PV) 효과로 발생한 찌꺼기를 제거하고, TM-soft tissue(ST)의 PVE에 의해서 제거된 ST는 환자 CT 프로파일을 이용해서 복원한다. 제안된 방법을 16명의 가상 내시경 환자 CT 데이타에 적용해서 임상의의 주관적인 평가와 computer-aided diagnosis(CAD)의 정량적 평가에서 매우 고무적인 결과를 획득했다.

• 한국한의학연구원논문집
• /
• 제12권2호통권17호
• /
• pp.85-92
• /
• 2006

Pulse is one of the basic diagnostic information of TKM(Traditional Korean Medicine). To quantify and standardize pulse diagnosis, we had collected an amount of clinical data from May 2005 by using newly developed pulse analyzer. But there were many noises in pulse wave according to measuring method, environment, operator and condition of patient. So some data can’t be included for analyzing diagnosis. To reduce noises from measuring pulse and to collect reliable pulse wave data, we made the process map of measuring method and applied six sigma project. With this we can improved the method of measuring pulse wave in collecting clinical data. The project follows a disciplined process of five macro phases: define, measure, analyze, improve and control (DMAIC). A process map and C-E diagram are used to identify process input and output variables. The major input variables are selected by using C&E matrix, and process map is developed by analyzing input variables. And the optimum process conditions are going to be controled to avoid in increasing loss of collecting pulse wave data.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.234-239
• /
• 2011

Transcranial magnetic stimulation utilizes the method of controlling applied time and changing pulse by output pulse through power density control for diagnosis purposes. Transcranial magnetic stimulation can also be used in cases where diagnosis and treatment are difficult since output pulse shape can be changed. As intensity, pulse range, and pulse shape of the stimulation pulse must be changed according to lesion, the existing sine wave-shaped stimulation treatment pulse poses limitations in achieving various treatments and diagnosis. This study actualized a new method of transcranial magnetic stimulation that applies a 3 Stage 2 Switch( power semiconductor 2EA) for controlling pulse repetition rate by achieving numerous switching control of stimulation coil. Intensity, pulse range, and pulse shape of output can be freely changed to transform various treatment pulses in order to overcome limitations in stimulation treatment presented by the previous sine wave pulse shape. The method of freely changing pulse range by using 3 Stage 2 Switch discharge method is proposed. Pulse shape, composed of various pulse ranges, was created by grafting PFN (Pulsed Forming Network) through AVR AT80S8535 one-chip microprocessor technology, and application in transcranial magnetic stimulation was achieved to study the output characteristics of stimulation treatment pulse according to delaying time of the trigger signal applied in section switch.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1726-1728
• /
• 2003

The aging diagnosis method using partial discharge measurement detects discharge signals that critical cause of failure in insulation material operated a long time and can diagnose aging state of insulation materials with an aging analysis algorithm. The HFPD measurement method is a technique to analyze aging state of high voltage insulation materials and detect higher frequency signals than conventional PD measurement method therefore it takes less noise effect and could execute active line measurement. It is possible to analyze main discharge phenomena and obtain access to aging progress occurred in insulation materials through accumulation of HFPD signals during determined interval and expression of fractal dimension using statistical process of accumulated signals. The HFPD signals that occurred in each applied voltages are measured during 180 cycles and accumulated to the same phase of one cycle. These patterns that made by previous method are normalized with logarithm function and than inputted to neural networks. The aging diagnosis of insulation material was possible and the recognition ratio of neural network appeared very high.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.415-416
• /
• 2007