• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.181-194
• /
• 2012

The one of the most meaningful change in the recent ubiquitous environment is the omnipresence of public digital display device for providing ubiquitous information. It is the important issue to provide publicity as well as adaptive information to each user in the field of the public digital display device. This research proposes the idea ensuring fast response speed by the selection of user preference function. The preference function is selected by statistics using Zipf distribution in the system comprising mobile device and digital display device based on NFC (Near Field Communication). The idea is proved by CPM-GOMS model and the improvement of user response can be achieved.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.65-80
• /
• 2007

The input and output device requires precise color representation and CMS (Color Management System) because of the increasing number of ways to apply the digital image into electronic publishing. However, there are slight differences in the device dependent color signal among the input and output devices. Also, because of the non-linear conversion of the input signal value to the output signal value, there are color differences between the original copy and the output copy. It seems necessary for device-dependent color information values to change into device-independent color information values. When creating an original copy through electronic publishing, there should be color management with the input and output devices. From the devices' three phases of calibration, characterization and color conversion, the device-dependent color should undergo a color transformation into a device-independent color. In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After undergoing a color transformation in the input and output devices, the best results were created when the original target underwent a color transformation by the scanner and digital camera input device by the linear multiple regression, and the LCD output device underwent a color transformation by the GOG model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.55-56
• /
• 2018

In order to reduce the risk of accidents, we proposed a construction safety management system combined with wearable device and LoRa (Low-Range Wireless Network) communication method to apply the usefulness of Internet (IoT) technology which means "everything connected". to construction safety management Management system. The proposed wearable safety device is a device that relays information exchange between wearable safety device and safety management server by LoRa wireless communication method. The safety management server can store workers bio-data and perform big data analysis. If a risk factor is determined from the analysis result, a warning is sent to the wearable safety device and the manager's application. The goal of this system is to prevent construction workers from entering the dangerous area that is not suitable for work, and to prevent safety accidents caused by human cause by detecting abnormal condition during work.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.276-284
• /
• 2009

In this paper, we develop the image transfer remote maintenance monitoring system for hand held device which can compensate defects of human mistake. The human mistakes always happen when the worker communicate information each other to check and maintenance the equipment of the power plant under bad circumstance such as small place and long distance in power plant. A worker couldn't converse with other when in noisy place like Power plant. So, we make some hand device for handy size and able to converse in noisy place. The developed system can have improvement of productivity through increasing plant operation time. And developed system is composed of advanced H/W(hard ware) system and S/W(soft ware)system. The H/W system consist of media server unit, communication equipment with hand held device, portable camera, mike and head set. The advanced s/w system consist of data base system, client pc(personal computer) real time monitoring system which has server GUI(graphic user interface) program, wireless monitoring program and wire ethernet communication program. The client GUI program is composed of total solution program as pc camera program, and phonetic conversation program etc.. We analyzed the required items and investigated applicable part in the image transfer remote maintenance monitoring system with hand held device. Also we investigated linkage of communication protocol for developed prototype, developed software tool of two-way communication and realtime recording skill of voice with image. We confirmed the efficiency by the field test in preventive maintenance of plant power.

• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1533-1540
• /
• 2012

u-라이프 케어 단말기는 생체 정보를 수집하고, 운동을 패턴 별로 분류, 저장하고 일정 시간마다 안드로이드 폰에 블루투스 무선통신을 통해 전송한다. 전송된 정보는 안드로이드 폰 어플리케이션을 통해 확인할 수 있다. u-라이프 케어 단말기는 3축 가속도 센서를 이용하여 활동량을 모니터링한 후 소모한 칼로리를 계산한다. 생체 데이터 마이닝을 통해 건강상태를 판단하고 적절한 맞춤형 운동치료를 컨설팅하게 된다. 생체 정보를 전송할 때 블루투스 무선통신을 통해 안드로이드 폰에 바로 전송하기 때문에 기존의 라이프케어 제품들에서 센싱된 정보를 웹서버에 전송하기 위해 사용되어지는 모바일 게이트웨이나 홈 게이트웨이가 별도로 필요치 않다는 장점을 가지고 있다.

• International Journal of Computer Science & Network Security
• /
• 제24권2호
• /
• pp.178-188
• /
• 2024

In the near future, it is expected that there will be billions of connected devices using fifth generation (5G) network services. The recently available base stations (BSs) need to mitigate their loads without changing and at the least monetary cost. The available spectrum resources are limited and need to be exploited in an efficient way to meet the ever-increasing demand for services. Device to Device communication (D2D) technology will likely help satisfy the rapidly increasing capacity and also effectively offload traffic from the BS by distributing the transmission between D2D users from one side and the cellular users and the BS from the other side. In this paper, we propose to apply D2D overlay communication with cognitive radio capability in 5G networks to exploit unused spectrum resources taking into account the dynamic spectrum access. The performance metrics; throughput and delay are formulated and analyzed for CSMA-based medium access control (MAC) protocol that utilizes a common control channel for device users to negotiate the data channel and address the contention between those users. Device users can exploit the cognitive radio to access the data channels concurrently in the common interference area. Estimating the achievable throughput and delay in D2D communication in 5G networks is not exploited in previous studies using cognitive radio with CSMA-based MAC protocol to address the contention. From performance analysis, applying cognitive radio capability in D2D communication and allocating a common control channel for device users effectively improve the total aggregated network throughput by more than 60% compared to the individual D2D throughput without adding harmful interference to cellular network users. This approach can also reduce the delay.

• 한국통신학회논문지
• /
• 제39A권3호
• /
• pp.161-163
• /
• 2014

K개의 셀과 각 셀에서 2개의 단말간 직접 통신(device-to-device communication: D2D communication) 링크 간에 셀룰러 하향 링크 자원을 재사용하는 다중셀 간섭 시스템에 중첩되어 있는 D2D 통신 모델을 고려한다. 본 논문에서는 현재의 셀 또는 인접 셀에 간섭을 미치지 않는 다수 개의 링크를 선택하거나 또는 전력 제어를 통해 다수 개의 링크가 어떤 기지국에도 간섭을 미치지 않는다고 가정했을 때, 간섭 정렬(interference alignment: IA)를 통해 셀간 및 셀 내의 하향링크 간섭을 효과적으로 없앨 수 있다는 것을 보인다. 특히, 2개의 D2D 통신 쌍에 대해서는 간섭채널에서 이론적으로 가능한 최대 자유도를 실현할 수 있는 방법을 제시하며, 기지국과 모든 단말의 송신 및 수신 안테나 개수가 각각 M일 때 그 자유도는 (K+1)M로 주어지는 것을 보인다.

• Journal of Information Technology Applications and Management
• /
• 제26권6호
• /
• pp.103-117
• /
• 2019

Demand for high power motors is rapidly increasing as the 4th industry and convergence technology has recently emerged. In order to produce high-strength permanent magnets, the magnets used for magnetization have been increased from DC 300V in the 1970s to DC 2.5kV in the 2010s, Up to DC 10kV in the 2030s, It is expected that higher voltage will be used to magnetize. However, in the case of a magnetizer using an existing electric signal control device, it is necessary to use a control device with a high-voltage insulation function in case a high voltage used for magnetization is leaked to the control device. If a short circuit accident occurs, the controller must be shut down and serious problems such as excessive repair costs arise. In this study, a control system adopting optical communication method instead of electric signal control method is proposed to prevent leakage currents in high-voltage magnetizer. We design a transmitter(Tx) and a receiver(Rx) device for the optical communication control device and implemented a prototype connecting the optical cable. In order to demonstrate the utility of high-voltage magnetizer using the optical communication control device, we analyzed the initial cost and the yearly cost for the years to analyze the net present value. As a result, In the case of the low-voltage magnetizer, the electric signal control method cost less, As the operating voltage of the magnetizer becomes higher. It is confirmed that it takes less cost when the optical communication control device is used.

• 디지털산업정보학회논문지
• /
• 제15권3호
• /
• pp.29-36
• /
• 2019

With the rapid development of 5G technology, more and more network functions are interconnected and more popular. In order to effectively manage emerging network concepts, it allows any device object in the real world to be connected anywhere and at any time through the integration of device object recognition, interaction and raw data collection technologies. In addition, IP Multimedia Subsystem (IMS) is an architecture framework for transmitting IP-based information to the device object which can be represented as end user. Therefore, the Internet of Things and IP Multimedia Subsystem (IoT-IMS) communication platform can provide a convenient and fast way for user or device objects to deploy new application services effectively. In particular, in order to collect and manage the device information from IoT effectively in the IoT-IMS communication platform, an IoT Information Gateway (IIG) is proposed. Through the IoT Application Service (AS) scenario, the collected device information can be easily observed and managed in a unified way.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.289-290
• /
• 2007

UPnP Bridge supporting diverse network interface has to meet standard requirements in order to be connected with legacy devices. It is able to provide or bridge a service description and device description according to a specification because IEEE1394 and USB have this standard requirements. But it is difficult to know whether it RS232C supports only serial communication and packet transfer. It need a document for the standard definition of communication protocol on UPnP device having such interface. By doing so, this document can understand device and packet type. This paper defines MFD(Message Field Description) and makes UPnP message converter. So it will be base to standardize supporting variable legacy device.