• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.842-849
• /
• 2011

The transponder simulator designed to simulate the transponder of military satellite communication systems in the geostationary orbit is required to have time delay function, because of 250 ms delay time, when a radio wave transmits the distance of 36,000 km in free space. But, it is very difficult to develop 250 ms time delay device in the transponder simulator of 100 MHz bandwidth, due to unstable operation of FPGA, loss of memory data for the high speed rate signal processing. Up to date, bandwidth of the time delay device is limited to 45 MHz bandwidth. To solve this problem, we propose the new time delay techniques up to 100 MHz bandwidth without data loss. Proposed techniques are the low speed down scaling and high speed up scaling methods to read and write the external memory, and the matrix structure design of FPGA memory to treat data as high speed rate. We developed the satellite link simulator in 100 MHz bandwidth using the proposed new time delay techniques, implemented to the transponder simulator and verified the function of 265 ms time delay device in 100 MHz bandwidth.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.424-432
• /
• 2009

This paper discusses about the implementation of a simulator for the Navigation Control System(NCS) of bimodal tram. To operate a NCS of bimodal tram, values of all sorts of sensors installed in bimodal tram should be transmitted to the NCS, and the NCS calculates the measured sensor values to determine traveling direction, traveling speed, current position etc. The implementation of the simulator consists of a device applying driver's input transaction function & virtual sensor program and a sub-rack device that controls communication with the NCS to evaluate navigation control function. The virtual sensor program can create routes (map), traveling profiles & seat information et cetera in order to transmit to the NCS, analyzes driver's input values and NCS output values to create virtual sensor values. The sub-rack device takes charge of communication with the NCS using CAN-OPEN, CAN-J1939, MVP protocols. This paper discusses about the implementation of the simulator and afterwards analyzes and evaluates the NCS simulation results.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.75-77
• /
• 2011

A simulator in Android is developed for Qualcomm Augmented Reality (QCAR) software development kit (SDK). The main purpose is to replace the testing of application on actual Android device. Bugs in the application can be found easily when testing is done in the simulator (with support of Android emulator) before the testing on real device. The simulator does not require a camera in testing augmented reality application. Works included study on QCAR SDK's behavior is done to ensure that the simulator performs similar to the SDK. Description on how would the simulator works with QCAR SDK is included in the paper.

• 한국항행학회논문지
• /
• 제18권2호
• /
• pp.114-120
• /
• 2014

본 논문에서는 비행장 관제 시뮬레이터 구현을 위해 필요한 사항을 살펴본다. 비행단계 중 비행장에서의 이착륙 단계는 항공 안전관리 측면에서 매우 중요시 다루어져야 한다. 그 이유는 전 세계 항공기 사고 및 준사고의 60%이상이이 단계에서 발생하는 것으로 조사되기 때문이다. 본 논문에서 항공교통관제 시뮬레이터의 평가 기준인 실습 유형, 장비 형태, 그리고 현실성의 충실도를 통하여 국내 항공교통관제 시뮬레이터의 구현 단계를 평가하고, 현업에 종사하는 항공교통관제사의 설문을 통해 현재 운용 중인 시뮬레이터의 문제점을 검토하여 그 해결방안을 살펴보았다. 또한 이를 바탕으로 개선된 HI-FI 항공교통관제 시뮬레이터의 구현 방향을 제시하고자 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1376-1379
• /
• 2004

This study is designed integration and control system of GaAs bonding system consisted of multi-processing using DeviceNet and GEM-Protocol. Developing bonding system is composed of resin coating, pre-baking pre-aligner, bonding, material handler(flip robot), and wafer cassette, etc. This system has process-fluent of each a process and share information using GEM-protocol. This study devised virtual bonding simulator to control and to monitor bonding system efficiently. Also we can verify optimizing of system previously through a virtual bonding simulator.

• 한국산업융합학회 논문집
• /
• 제4권3호
• /
• pp.329-337
• /
• 2001

This simulator is developed for the analysis of a MOSFET based on Thermally Coupled Energy Transport Model(TCETM). The simulator has the ability to calculate not only stationary characteristics but also non - stationary characteristics of a MOSFET. It solves basic semiconductor devices equations including Possion equation, current continuity equations for electrons and holes, energy balance equation for electrons and heat flow equation, using finite difference method. The conventional semiconductor device simulation technique, based on the Drift-Diffusion Model (DDM), neglects the thermal and other energy-related properties of a miniaturized device. I, therefore, developed a simulator based on the Thermally Coupled Energy Transport Model (TCETM) which treats not only steady-state but also transient phenomena of such a small-size MOSFET. In particular, the present paper investigates the breakdown characteristics in transient conditions. As a result, we found that the breakdown voltage has been largely underestimated by the DDM in transient conditions.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.94-100
• /
• 2002

As the use of automatic handling equipment for sensitive semiconductor devices is rapidly increased, manufacturers of electronic components and equipments need to be more alert to the problem of electrostatic discharges(ESD). In order to analyze damage characteristics of semiconductor device damaged by ESD, this study adopts a new charged-device model(CDM), field-induced charged model(FCDM) simulator that is suitable for rapid, routine testing of semiconductor devices and provides a fast and inexpensive test that faithfully represents ESD hazards in plants. High voltage applied to the device under test is raised by the field of non-contacting electrodes in the FCDM simulator, which avoids premature device stressing and permits a faster test cycle. Discharge current and time are measured and calculated. The characteristics of electrostatic attenuation of domestic semiconductor devices are investigated to evaluate the ESD phenomena in the semiconductors. Also, the field charging mechanism, the device thresholds and failure modes are investigated and analyzed. The damaged devices obtained in the simulator are analyzed and evaluated by SEM. The results obtained in this paper can be used to prevent semiconductor devices form ESD hazards and be a foundation of research area and industry relevant to ESD phenomena.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.51.2-51
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Simulator Architecture $\textbullet$ Navigation and Collision Detection $\textbullet$ Deformable Model and Force Reflection $\textbullet$ 4-DOF Haptic Device $\textbullet$ Conclusion

• 구강생물연구
• /
• 제42권4호
• /
• pp.235-240
• /
• 2018

Standard oral and maxillofacial three-dimensional model was developed with patients' medical data while virtual reality (VR) simulator was developed in conjunction with head mount display (HMD) and Haptic device. The objective of this study was to evaluate the preclinical use of a VR training simulator in tooth preparation practice. Eighty-nine dental students were trained how to operate the simulator. The participants were then given sufficient time on the simulator to practice dental preparation. The students experience and opinion was then taken in through filling of questionnaires. On average content received 1.8 points, anatomy had 2.5 points, 2.6 points for the applicability, and 2.0 for the usability. As for the detailed items scores, queries about the possible development of the simulator and the interest of the learning process through the simulator were the highest at 3.1 and 3.0 points, respectively. Question about the benefit of the HMD and the haptic device during the practice had 1.5 and 1.6 points, respectively. The average total score was 2.2 points. VR tooth preparation simulator in the field of clinical dental education has powerful potential in regard to realistic models, environments, vision, posture, and economical efficiency.

• 한국정보통신학회논문지
• /
• 제14권6호
• /
• pp.1429-1434
• /
• 2010

일반적으로 모바일 단말용 시뮬레이터에서는 이벤트 발생 순서에 따라 로그 파일에 저장된 이벤트를 다시 단말의 응용 SW로 주입하여 자동적으로 응용 SW를 시험하게 된다. 그러나 동일한 이벤트라도 추출 계층에 따라 모바일 단말용 시뮬레이터의 성능이 달라질 수 있다. 그리고, 복수 개의 응용이 동시에 수행하는 환경에서는 응용에서 추출된 이벤트들의 순서가 시스템 상태에 따라 변경될 수 있다. 즉, 동일한 응용들을 동일한 순서로 수행하더라도 시스템의 상태에 따라 이벤트의 발생순서가 변경되어 어떤 경우에는 오류가 발생하고, 어떤 경우에는 정상적으로 동작하는 경우가 발생한다. 이러한 응용 SW 오류는 디버깅하기가 매우 어렵다. 본 논문에서는 응용 및 커널/미들웨어 계층에서 발생하는 이벤트들을 분석하여, 이들 이벤트들을 재편집함으로써 다양한 응용의 실행상태를 확인할 수 있으며, 또한 각 이벤트들이 응용, 커널 및 미들웨어 계층에 미치는 영향을 효율적으로 파악할 수 있는 이벤트 배열/편집기를 설계 및 구현하였다.