• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.925-933
• /
• 2018

In this paper, we propose a new smart ordering application system for granting the customer numbers. The proposed system assigns sequence number of customers who visit at offline store as using speaker and microphone of smart device. This system has more advantage than the existing ordering system. Because the proposed system does not need any customer information like as phone number or SNS ID, it can protect customer privacy information. In this system, we use high frequency which is inaudible to the human ear as communication signal between speaker and microphone. To confirm performance evaluation, we perform a test with ten smart devices like as iPhone 6, 7, 8, Galaxy s8 and the result shown a success rate of 98.7 percent. Therefore, the proposed system can be useful service technology at the various offline store which need to assign a sequence number for customers, because many customers visit at the store.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.113-116
• /
• 1996

The drain current of the MOSFET in the off state(i.e., Id when Vgs=0V) is undesired but nevertheless important leakage current device parameter in many digital CMOS IC applications (including DRAMs, SRAMs, dynamic logic circuits, and portable systems). The standby power consumed by devices in the off state have added to the total power consumed by the IC, increasing heat dissipation problems in the chip. In this paper, hot-carrier-induced degra- dation and gate-induced-drain-leakage curr- ent under worse case in P-MOSFET\`s have been studied. First of all, the degradation of gate-induced- drain-leakage current due to electron/hole trapping and surface electric field in off state MOSFET\`s which has appeared as an additional constraint in scaling down p-MOSFET\`s. The GIDL current in p-MOSFET\`s was decreased by hot-electron stressing, because the trapped charge were decreased surface-electric-field. But the GIDL current in n-MOS77T\`s under worse case was increased.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.159-172
• /
• 2018

This study searched and analyzed online tracking technologies. It tried to understand what to consider when establishing policies related to online tracking. Online tracking technologies were classified into 'general cookies', 'super cookies', 'fingerprinting', 'device ID tracking' and 'cross-device tracking'. Political considerations should include the layers of online tracking, the subjects of tracking technology, purpose of use, duration and storage format of information, and development of technology. The implications of this study are as follows: first, policy makers and industry should be aware that the degree of risk perceived by users may vary according to the characteristics of online tracking technology. Secondly, it is necessary to understand factors that affect the classification of online tracking technology. Finally, in the industry, preemptive measures such as building an integrated privacy system are needed to relieve anxiety of users and to build trust.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.98-107
• /
• 2011

In this paper, we propose the location determination system of an agent mobile device using the information provided by the WLAN(Wireless LAN) infrastructure. This system is configured as a typical ESS(Extended Service Set)-type WLAN structure with real-time location positioning engine and thru AP(Access Point) controller. The positioning engine collects the information of agent devices using SNMP(Small Network Management Protocol) thru AP controller and utilize those information as Cell ID. for LBS(Location Based Service). In the result of a real office environment implementation, the average success rate of inter-AP roaming is measured to 62.5% and the duration time of the device information update within the AP is average of 11 second of time, which means this system is adaptable to the location based service of above average accuracy but somewhat less urgency.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.347-355
• /
• 2012

A biometric hardware security module is a physical device that comes in the form of smartcard or some other USB type security token is composed with biometric sensor and microcontroller unit (MCU). These modules are designed to process key generation and electronic signature generation inside of the device (so that the security token can safely save and store confidential information, like the electronic signature generation key and the biometric sensing information). However, the existing model is not consistent that can be caused by the disclosure of an ID and password, which is used by the existing personal authentication technique based on the security token, and provide a high level of security and personal authentication techniques that can prevent any intentional misuse of a digital certificate. So, this paper presents a model that can provide high level of security by utilizing the biometric security token and Public Key Infrastructure efficiently, presenting a model for privacy preserving personal authentication that links the biometric security token and the digital certificate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.117-123
• /
• 2022

Unlike the satellite-based outdoor positioning system, the indoor positioning system utilizes various wireless technologies such as BLE, Wi-Fi, and UWB. BLE-based beacon technology can measure the user's location by periodically broadcasting predefined device ID and location information and using RSSI from the receiving device. Existing BLE-based indoor positioning system studies have many studies comparing the error between the user's actual location and the estimated location at a single point. In this paper, we propose a technique to evaluate the positioning accuracy according to the movement path or area by applying the entropy analysis model. In addition, simulation results show that calculated entropy results for different paths can be compared to assess which path is more accurate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1061-1066
• /
• 2012

A digital memory has been widely used as a device for storing information due to its reliable, fast and relatively simple control circuit. However, the storage of the digital memory will be limited by the inablility to make smaller linewidths. One way to dramatically increase the storeage capability of the memory is to change the type of stored data from digital to analog. The analog memory fabricated in a standard single poly 0.6um CMOS process has been developed. Single cell and adjacent circuit block for programming have been designed and characterized. Applications include low-density non-volatile memory, control of redundancy in SRAM and DRAM memories, ID or security code registers, and image and sound memory.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.5
• /
• pp.1113-1118
• /
• 2018

Fingerprint authentication is the most popular biometric in smart devices. However it has vulnerability to fake fingerprints. This paper shows that it is possible to pass fingerprint authentication of smartphone by creating counterfeit fingerprint without approval of legitimate users. As a technical countermeasure to prevent such a smudge-based attack, there has been proposed an under-screen Touch ID with a slide bar, which is a method of removing the fingerprint trail by dragging the UI to the side after fingerprint authentication on the touch screen. In this paper, we analyze how the proposed attack method and mitigation are perceived by actual user through 61 user survey.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.267-270
• /
• 2017

As IT technology developed, storage media also developed. Among them, USB, which is a removable storage medium, is used not only to have several per person but also to work in various companies. Users store valuable and confidential data within USB. As time went on, the need for security increased. In order to solve this security problem, USB has been introduced to allow users to access internal files by inputting ID and password by embedding a security program in USB. However, the method of storing ID and Password inside is low confidentiality and high risk of information leakage. To solve these problems, we propose a 2 factor authentication system using Radius server in addition to login authentication. The proposed system not only improves the authenticity of the device, but also reduces the risk of infringement of personal information when lost. It also encrypts internal files to increase the confidentiality of internal information.

• The KIPS Transactions:PartC
• /
• v.18C no.6
• /
• pp.397-404
• /
• 2011

Recently the existing one-way electricity system that combines information and communications technology to develop smart grid technology is made active. The core infrastructure of the smart grid, AMI smart meters to AMR system, the amount of power measured at the top to MDMS transmits data store. Smart meters utilizing information and communication technology to transfer data and power because of the existing security threats are expected, including the additional security threats. It exposes the privacy of consumers and industrial systems, such as paralysis is likely to result in the loss. In this paper to respond to these security threats in the environment smart grid. Also, We propose data transfer methods between smartmeter and MDMS and between home device and MDMS.