• Journal of the Korean Statistical Society
• /
• 제33권4호
• /
• pp.381-399
• /
• 2004

Statistical process control (SPC) and engineering process control (EPC) are based on different strategies for process quality improvement. SPC re-duces process variability by detecting and eliminating special causes of process variation, while EPC reduces process variability by adjusting compensatory variables to keep the quality variable close to target. Recently there has been need for an integrated process control (IPC) procedure which combines the two strategies. This paper considers a scheme that simultaneously applies SPC and EPC techniques to reduce the variation of a process. The process model under consideration is an IMA(1,1) model with a step shift. The EPC part of the scheme adjusts the process, while the SPC part of the scheme detects the occurrence of a special cause. For adjusting the process repeated adjustment is applied according to the predicted deviation from target. For detecting special causes the exponentially weighted moving average control chart is applied to the observed deviations. It was assumed that the adjustment under the presence of a special cause may increase the process variability or change the system gain. Reasonable choices of parameters for the IPC procedure are considered in the context of the mean squared deviation as well as the average run length.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.599-607
• /
• 2004

이 논문은 PLL주파수 합성기의 루프 대역폭보다 높은 주파수에서 낮은 주파수까지 변화하는 신호에 대한 주파수 변조가 일정한 최대 주파수 편이를 갖도록 하는 단순하면서도 저가의 새로운 주파수 변조회로를 소개하였다. 이 주파수 변조회로는 PLL 안에서의 주파수에 따른 루프 필터의 궤환량을 보상하도록 설계되었고 최대주파수 편이값 조절과 루프와의 상호 간섭을 제거할 수 있도록 설계되었다. 또한 기존의 스펙트럼 분석기로 $\Delta$f(최대 주파수 편이)또는 $\beta$(변조 지수)를 측정하는 방법은 협대역 주파수 변조에서만 유용하여 광대역 주파수에서 측정할 수 있도록 새로운 측정방법을 제안하고 변조 신호 발생기를 이용하여 정확성을 확인하였다. 이런 한 방법으로 설계하여 제작한 회로를 측정하여 기대한 일정한 최대 주파수 편이를 가지는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제35권1호
• /
• pp.80-90
• /
• 2003

According to related studies, it was revealed that the procedural deviation plays a significant role in initiating accidents or incidents. This means that, to maximize safety, it is indispensable to be able to answer the question of “why the operators deviate from procedures\ulcorner” In this study, the SC (step complexity) measure is introduced to investigate its applicability for studying the procedural deviation, since it was shown that the change of the operators' performance is strongly correlated with the change of SC scores. This means that the SC measure could play an important role for researches related to the procedural deviation, since it is strongly believed that complicated procedures would affect both the operator' performance and the possibility of the procedural deviation. Thus, to ensure this expectation, the meaning of the SC measure is investigated through brief explanations including the necessity, theoretical basis and verification activities of the SC measure. As a result, it is confirmed that the SC measure can be used to explain the change of the operators' performance due to the task complexity implied by procedures. In addition, it seems that the SC measure nay be useful for various purposes, particularly for scrutinizing the relationship between the procedural deviation and complicated procedures.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3730-3734
• /
• 2011

The degree of self-assembly and the size variation of nanotubular structures in anodic titanium oxide prepared by the anodization of titanium in ethylene glycol containing 0.25 wt % $NH_4F$ at 40 V were investigated as a function of anodization time. We found that the degree of self-assembly and the size of the nanotubes were strongly dependent on thickness deviation and thus indirectly on anodization time, as the thickness deviation was caused by the dissolution of the topmost tubular structures at local areas during long anodization. A large deviation in thickness led to a large deviation in the size and number of nanotubes per unit area. The dissolution primarily occurred at the bottoms of the nanotubes ($D_{bottom}$) in the initial stage of anodization (up to 6 h), which led to the growth of nanotubes. Dissolution at the tops ($D_{top}$) was accompanied by $D_{bottom}$ after the formed structures contacted the electrolyte after 12 h, generating the thickness deviation. After extremely long anodization (here, 70 h), $D_{top}$ was the dominant mode due to increase in pH, meaning that there was insufficient driving force to overcome the size distribution of nanotubes at the bottom. Thus, the nanotube array became disorder in this regime.

• 설비공학논문집
• /
• 제20권7호
• /
• pp.478-485
• /
• 2008

The extreme steam temperature deviation experienced in the superheater of a tangentially fired boiler can seriously affect its economic and safe operation. This temperature deviation is one of the main causes of boiler tube failures. The steam temperature deviation is mainly due to the thermal load deviation in the lateral direction of the superheater. The thermal load deviation consists of several causes. One of the causes is the non-uniform heat flow distribution of burnt gas on the superheater tube system. This distribution is very difficult to measure in situ using direct experimental techniques. So, we need thermal load model to estimate the tube temperature. In this paper, we propose a thermal load distribution model by using CFD analysis and plant data. We successfully predict the tube temperature and the steam flow rate in a final superheater system from the thermal load model and one dimensional heat-flow system analysis. The proposed model and analysis method would be valuable in preventing the frequent tube failure of the final superheater tubes.

• 대한수학교육학회지:수학교육학연구
• /
• 제24권3호
• /
• pp.375-385
• /
• 2014

이 연구는 학교수학의 모평균과 모비율의 신뢰구간의 추정을 비교하면서 두 추정간에 일관성이 확보되고 있는지에 대해 고찰하였다. 이 결과를 토대로, 이 연구에서는 표본평균과 표본비율을 동일한 방식으로 취급하는 것, 모평균과 모비율의 신뢰구간의 예를 구성할 때 모표준편차 대신에 표본표준편차의 관측값을 대입하는 절차를 동일하게 적용하는 것, 표본비율 $\hat{P}$와 그에 대한 관측값 $\hat{p}$을 구별하는 것과 같은 일관성 확보 방안을 제안하였다.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1095-1101
• /
• 2013

The purpose of this study was to verify the effect on improvement of muscle strength unbalance according to load deviation protocol during whole body vibration exercise. Seventeen female volunteers (age $22{\pm}3$ years, height $160{\pm}4.9$ cm, weight $49{\pm}.8$ kg) participated in this experiment. The subjects performed squat exercise in WBV platform. Exercise were performed five set a day including 15 time a set, three days a week, and during 4 weeks. Vibration stimulus was 25Hz as frequency and intensity was dominant leg 1mm and non-dominant leg 4mm. The results in WBV group showed that the differences of peak torque in 16% were getting decreasing significantly after 4 weeks from 16.2% to 5.2%. This result means that WBV with load deviation protocol could provide muscle strength exercise for muscle strength balance. Our study found out that WBV of load deviation protocol could provide muscle strength exercise for improving muscle imbalance.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권6호
• /
• pp.603-610
• /
• 2018

This study examined the following: accuracy of the exposure conditions in the inverter device and three-phase device; output waveform over the exposure conditions; and average and standard deviation of the output waveform. After assessing whether the dose corresponding to the theoretical dose was presented, the following conclusions were obtained: 1. The accuracy of the tube voltage(kVp) and tube current(mA) exposure time(sec) was within the tolerable level prescribed in Korea's Safety Management Standards. In the error, Inverter device was large the tube voltage and exposure time, the three-phase device was large the tube current. 2. In terms of the output waveform of the exposure conditions and the average and standard deviation of the output waveform, the higher tube voltage and larger tube current resulted in greater standard deviation in pulsation. Moreover, the standard deviation of pulsation was shown to be greater in the inverter device than the three-phase device; there was also greater standard deviation in the inverter device considering the exposure time. 3. Regarding the exposure conditions over the output dose, all linearity showed the coefficient of variation which had an allowable limit of error within 0.05. Although the output dose ratio for the inverter device was 1.00~1.10 times no difference that of the three-phase device, there was almost no difference in dose ratio between the tube currents.

• 한국환경과학회지
• /
• 제30권12호
• /
• pp.983-991
• /
• 2021

The role of the distribution basin role is to apportion incoming raw water to the primary sedimentation basin as part of the water treatment process. The purpose of this study was to calculate the amount of water in the distribution basin using computational fluid dynamics (CFD) analysis and to find a way to improve any non-uniformity. We used the Taguchi method and the minitab tool as optimization methods. The results of the CFD calculation showed that the distribution flow had a deviation of 5% at the minimum inflow, 10% at the average inflow, and 22% at the maximum inflow. At maximum flow, the appropriate heights of the 7 weirs(C, D, A, B, E, F, G) were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, according to the Taguchi optimization tool. Here, the maximum deviation of the distribution amount was 9% and the standard deviation was 23.7. The appropriate heights of the 7 weirs, according to the Minitab tool, were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, for weirs C, D, A, B, E, F, and G. Therefore, the maximum deviation of the distribution amount was 8% and the standard deviation was 17.1, which was slightly improved compared to the Taguchi method.

• 대한수학회지
• /
• 제38권5호
• /
• pp.937-954
• /
• 2001

This paper is a natural continuation of [2], [3], [4] and [5]. Localization techniques for modular lattices are developed. These techniques are applied to study liftings of linear order types from quotient lattices and to find Г-dense sets in certain lattices without Г-deviation in the sense of [4], where Г is a set of indecomposable linear order types.