Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.
목 적: ISO 9001:2000 품질경영시스템은 국제적인 인중 기준에 의해 제품 및 서비스의 품질을 적절하게 판정하고 이를 향상시키기 위해 시행되고 있다. 본 연구에서는 이러한 품질경영시스템을 보조생식술 센터에 성공적으로 도입하고 적용하는 과정에서 확인된 효용성에 대해 기술하고자 한다. 연구방법: 제일병원 아이소망센터는 2004년 1월부터 ISO 9001:2000 인증을 위한 활동을 시작하였으며, 고객만족도조사와 주기적인 내부심사와 사후심사를 실시하였다. 심사과정에서 확인된 부적합 사항에 대한 시정 및 예방 조치와 이에 따른 효과성을 검증하였으며, 고객불만사항에 대한 지속적인 관리와 개선을 위한 프로젝트를 진행하였다. 결 과: 본 센터는 초일류 불임센터로 성장하고 최적의 품질경영시스템을 확립하기 위한 품질방침을 설정하여, 2004년 6월에 한국품질재단 (Korean Foundation for Quality)으로부터 "체외수정 및 배아이식 시술에 관련된 연구"에 대하여 ISO 9001:2000 인증을 받았다. 이러한 품질방침을 실현하기 위해 품질경영시스템에 적합한 품질매뉴얼, 프로세스, 절차서, 지침서 등에 대한 문서화를 완료하였다. 삼 년 동안의 내부심사와 사후심사에서 각각 140건과 7건의 부적합이 확인되었으며, 이에 대한 시정조치를 실시하였다. 결 론: 본 센터에서는 ISO 품질경영시스템의 도입과 운영을 통해 고객만족도의 향상, 체계적인 문서화를 통해 업무의 투명화와 효율화가 가능하였다. 보조생식술 센터에서의 ISO 품질경영시스템은 보조생식술에 대한 국가적인 관리시스템을 효율적으로 운영하기 위한 기본적인 기관별 경영시스템으로서 활용이 가능할 것으로 생각된다.
A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2004 and 2005 has been done. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD and flow visualization(PIV, PTV and LDV methods) technologies were widely applied for developing facilities and their systems. (2) The research trends of the previous two yews are surveyed as groups of natural convection, forced convection, electronic cooling, heat transfer enhancement, frosting and defrosting, thermal properties, etc. New research topics introduced include natural convection heat transfer enhancement using nanofluid, supercritical cooling performance or oil miscibility of $CO_2$, enthalpy heat exchanger for heat recovery, heat transfer enhancement in a plate heat exchanger using fluid resonance. (3) The literature for the last two years($2004{\sim}2005$) is reviewed in the areas of heat pump, ice and water storage, cycle analysis and reused energy including geothermal, solar and unused energy). The research on cycle analysis and experiments for $CO_2$ was extensively carried out to replace the Ozone depleting and global warming refrigerants such as HFC and HCFC refrigerants. From the year of 2005, the Gas Engine Heat Pump(GHP) has been paid attention from the viewpoint of the gas cooling application. The heat pipe was focused on the performance improvement by the parametric analysis and the heat recovery applications. The storage systems were studied on the performance enhancement of the storage tank and cost analysis for heating and cooling applications. In the area of unused energy, the hybrid systems were extensively introduced and the life cycle cost analysis(LCCA) for the unused energy systems was also intensively carried out. (4) Recent studies of various refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and of alternative refrigerants including carbon dioxide. Efficiency of various compressors and expansion devices are also dealt with for better modeling and, in particular, performance improvement. Thermoelectric module and cooling systems are analyzed theoretically and experimentally. (5) According to the review of recent studies on ventilation systems, an appropriate ventilation systems including machenical and natural are required to satisfied the level of IAQ. Also, an recent studies on air-conditioning and absorption refrigeration systems, it has mainly focused on distribution and dehumidification of indoor air to improve the performance were carried out. (6) Based on a review of recent studies on indoor environment and building service systems, it is noticed that research issues have mainly focused on optimal thermal comfort, improvement of indoor air Quality and many innovative systems such as air-barrier type perimeter-less system with UFAC, radiant floor heating and cooling system and etc. New approaches are highlighted for improving indoor environmental condition as well as minimizing energy consumption, various activities of building control and operation strategy and energy performance analysis for economic evaluation.
Lee, Hyejin;Kim, Jinhee;Park, Jun Yeon;Kang, Ki Sung;Park, Joeng Hill;Hwang, Gwi Seo
Journal of Ginseng Research
/
제41권3호
/
pp.257-267
/
2017
Background: Heat-processed ginseng, sun ginseng (SG), has been reported to have improved therapeutic properties compared with raw forms, such as increased antidiabetic, anti-inflammatory, and antihyperglycemic effects. The aim of this study was to investigate the antiobesity effects of SG through the suppression of cell differentiation and proliferation of mouse 3T3-L1 preadipocyte cells and the lipid accumulation in Caenorhabditis elegans. Methods: To investigate the effect of SG on adipocyte differentiation, levels of stained intracellular lipid droplets were quantified by measuring the oil red O signal in the lipid extracts of cells on differentiation Day 7. To study the effect of SG on fat accumulation in C. elegans, L4 stage worms were cultured on an Escherichia coli OP50 diet supplemented with $10{\mu}g/mL$ of SG, followed by Nile red staining. To determine the effect of SG on gene expression of lipid and glucose metabolism-regulation molecules, messenger RNA (mRNA) levels of genes were analyzed by real-time reverse transcription-polymerase chain reaction analysis. In addition, the phosphorylation of Akt was examined by Western blotting. Results: SG suppressed the differentiation of 3T3-L1 cells stimulated by a mixture of 3-isobutyl-1-methylxanthine, dexamethasone, and insulin (MDI), and inhibited the proliferation of adipocytes during differentiation. Treatment of C. elegans with SG showed reductions in lipid accumulation by Nile red staining, thus directly demonstrating an antiobesity effect for SG. Furthermore, SG treatment down-regulated mRNA and protein expression levels of peroxisome proliferator-activated receptor subtype ${\gamma}$ ($PPAR{\gamma}$) and CCAAT/enhancer-binding protein-alpha ($C/EBP{\alpha}$) and decreased the mRNA level of sterol regulatory element-binding protein 1c in MDI-treated adipocytes in a dose-dependent manner. In differentiated 3T3-L1 cells, mRNA expression levels of lipid metabolism-regulating factors, such as amplifying mouse fatty acid-binding protein 2, leptin, lipoprotein lipase, fatty acid transporter protein 1, fatty acid synthase, and 3-hydroxy-3-methylglutaryl coenzyme A reductase, were increased, whereas that of the lipolytic enzyme carnitine palmitoyltransferase-1 was decreased. Our data demonstrate that SG inversely regulated the expression of these genes in differentiated adipocytes. SG induced increases in the mRNA expression of glycolytic enzymes such as glucokinase and pyruvate kinase, and a decrease in the mRNA level of the glycogenic enzyme phosphoenol pyruvate carboxylase. In addition, mRNA levels of the glucose transporters GLUT1, GLUT4, and insulin receptor substrate-1 were elevated by MDI stimulation, whereas SG dose-dependently inhibited the expression of these genes in differentiated adipocytes. SG also inhibited the phosphorylation of Akt (Ser473) at an early phase of MDI stimulation. Intracellular nitric oxide (NO) production and endothelial nitric oxide synthase mRNA levels were markedly decreased by MDI stimulation and recovered by SG treatment of adipocytes. Conclusion: Our results suggest that SG effectively inhibits adipocyte proliferation and differentiation through the downregulation of $PPAR{\gamma}$ and $C/EBP{\alpha}$, by suppressing Akt (Ser473) phosphorylation and enhancing NO production. These results provide strong evidence to support the development of SG for antiobesity treatment.
가스절연개폐장치 (Gas-insulated switchgear, GIS)의 내부에는 절연에 관한 이상 여부를 감시하고 판단할 수 있는 시스템이 요구된다. 부분방전에 의해 발생되는 $SF_6$ 분해생성물에 관한 단일벽 탄소나노튜브 (Single-walled carbon nanotube, SWNT)가 지닌 우수한 검출기능 때문에 SWNT를 이용한 가스센서 개발이 활발히 진행되고 있다. 하지만 아직까지 부분방전에 의해 발생된 분해생성물의 확산현상에 관한 해석적 연구는 미흡한 실정이다. 본 논문에서는 실험 데이터 및 상용 CFD (Computational Fluid Dynamics) 프로그램을 이용하여 SWNT 가스센서에 포획되는 분해생성물의 코로나 방전에 의한 발생 과정과 챔버 내부에서의 확산과정을 모델링하여 부분방전 발생 시 챔버 내부의 온도, 압력, 그리고 분해생성물의 농도 등을 수치계산하였다. 분해생성물의 시간당 질량생성율과 발생온도는 각각 $5.04{\times}10^{-10}$ [g/s]와 773 K이라 가정하였다. 농도방정식을 계산함에 있어 미지의 확산계수를 임의의 값으로 가정하여 직접 부여하는 방법을 사용하지 않고, 확산계수를 정의하는데 사용되는 Schmidt수의 값을 지정하여 확산계수가 $SF_6$ 가스의 물성치인 점성계수와 밀도의 함수로 계산되도록 하였다. 수치결과로부터 분해생성물의 농도구배가 확산을 일으키는데 주요 구동포텐셜 (Drive potential)이 됨을 확인하였다. 센서 설치위치가 부분방전 발생영역에서 멀리 떨어질수록 분해생성물 농도가 낮음을 알 수 있었고, 부분방전이 지속될수록 분해생성물의 농도가 증가함을 확인하였다. 다수의 센서를 챔버 내부에 설치하면 각 센서의 응답시간을 확인하여 PD 발생위치를 판단할 수 있을 것이고, 이를 통해 GIS 진단 및 유지보수에 관한 유용한 정보로 사용될 수 있을 것이다.
구증구포방법은 기존의 홍삼제조방법에서와 같이 9회 반복 과정으로 새로운 신규사포닌 등 성분변화가 일어나지만 시간이 오래 걸리고 복잡하며 어떤 특수 성분이 얼마나 증가 되는지 보고 되어 있지 않다. 또한 기존의 구증구포방법은 제조공정 중 건조시 보통 $60^{\circ}C$에서 열풍건조를 하기 때문에 건조시 관리의 부족으로 간혹 벤조피렌에 노출되는 경우가 있다. 본 방법은 새로운 자동 구증구포방법으로 제조시간이 약 2배정도 단축되며 특히 건조시 습열냉각건조를 통하기 때문에 벤조피렌함량이 거의 검출되지 않았다. 또한 사포닌 변환 등은 기존 구증구포방법과 같이 사포닌 변화가 일어나 홍삼에서만 나타나는 Rg3와 기타 효능활성물질 등이 분석되었다. 인삼사포닌의 경우에는 증포횟수가 증가함에 따라 흡수가 어려운 major ginsenoside(Rg1, Re, Rb1, Rc, Rb2 및 Rd)의 함량이 점차적으로 감소되고 대신 흡수가 빠르고 항암활성이 강한 minor ginsenoside (Rh1, 20(S)-Rg2, 20(R)-Rg2, 20(S)-Rg3, 20(R)-Rg3, Rk1 및 Rg5)의 함량이 점차적으로 증가하였다. 특히 diol계 사포닌인 ginsenosides Rb1, Rb2, Rc 및 Rd는 Rg3, Rk1 및 Rg5로 전환되었고, triol계 사포닌인 ginsenosides Rg1 및 Re는 Rh1, Rg2로 전환되었다. 수삼에서의 환원당, 산성다당체 및 총 페놀 화합물 함량은 7회까지 유의적으로 증가하였고 8회부터 점차 감소하는 경향을 보였다. DPPH 라디칼 소거활성은 7회까지 점차적으로 감소하여 $IC_{50}$값이 68% 감소되는 것으로 나타났으며 7회부터 9회까지는 큰 유의적 차이가 없었다. 결론적으로 본 자동 구중구포방법은 기존의 방법과 물질생성은 거의 비슷하지만 시간이 단축되고 벤조피렌 함량이 거의 검출되지 않아 앞으로 고부가가치 인삼산업에 많은 도움을 줄 것으로 생각된다.
본 연구의 목적은 2002년도부터 2011년도까지 10년간의 가정과 '임용시험 문항'(이하 '총 문항'이라 칭함)을 대상으로 분야별 출제 비율 분석, 평가 내용 요소(이하 '평가 요소'라고 칭함)에 따른 문항 분석, 임용 상세화 기준 개발 이전과 이후의 분야별 평가 내용 요소를 분석하는데 있다. 연구 결과를 요약하면 다음과 같다. 첫째, 가정과교육학 분야의 분석 결과 총 문항 중 30.9%의 비중을 차지했으며, 최근에는 35%의 출제 비율을 보이고 있다. 평가 요소별 출제 비율을 보면 '가정과 교수 학습 방법의 실제'(33.2%)가 가장 높았으며, '가정과교육의 본질'(3.2%)은 가장 낮았다. 둘째, 식생활 분야의 분석 결과 총 문항 중 17.5%의 비중을 차지했으며, 최근에는 15%의 출제 비율을 보이고 있다. 평가 요소별 출제 비율을 보면 '조리원리 실습'(26.1%)이 가장 높았으며, '식생활 문화'(3.7%)는 가장 낮았다. 셋째, 의생활의 분야의 분석 결과, 총 문항 중 15%의 비중을 차지했으며 최근에는 12.5%의 출제 비율을 보이고 있다. 평가 요소별 출제비율을 보면 '의복 관리'(25.1%)와 '의복 및 생활용품 제작'(25.1%)이 가장 높았으며, '의복의 선택과 자기표현'(3.0%)은 가장 낮았다. 넷째, 주생활 분야의 분석 결과, 총 문항 중 11%의 비중을 차지했으며 최근에는 12.5%의 출제 비율을 보이고 있다. 평가 요소별로는 '주거생활문화의 이해'(22.5%)가 가장 높고, '주거실내디자인의 이해'(10.7%)는 가장 낮았다. 다섯째, 소비생활 분야의 분석 결과, 총 문항 중 12.4%의 비중을 차지했고, 최근에는 12.5%의 출제 비율을 보이고 있다. 평가 요소별 출제 비율을 보면 '가정자원관리'(34%)가 가장 높았으며, '생애설계와 가정복지'(0%)에서는 전혀 출제되지 않았다. 여섯째, 가족생활 분야의 분석 결과 총 문항 중 13.3%의 비중을 차지했고, 최근에는 12.5%의 출제 비율을 보이고 있다. 평가 요소별 출제 비율은 '가족에 대한 이해와 가족의 변화'(23.8%)가 가장 높았고, '결혼과 가족발달'(2%)은 가장 낮았다. 마지막으로, 전반적으로 임용 상세화 기준의 개발은 가정과 중등 임용 시험의 평가 영역별 내용 요소의 균등화와 다양화의 문제를 다소 완화하였다.
본 연구는 독서를 활용한 기술 가정 수업의 효과를 알아보기 위해서 식생활 단원을 중심으로 독서교육의 교수-학습 지도안을 개발 적용하여, 학생들의 기술 가정 수업에 대한 흥미를 높이고 식생활 문제에 대한 관심도를 증가시켜 안전한 식품을 선택할 수 있는 능력을 길러주는 데 목적을 두었다. 본 연구에서는 경기도 부천시의 중학교 3학년을 대상으로 사전의 영양 성취도 점수를 비교하여 실험집단과 통제집단을 선정하였다. 통제집단은 전통적 강의식 수업으로, 실험집단은 독서교육을 활용하여 4주간, 총 8차시의 수업을 실시한 후 두 집단의 실험 처치 전 후의 차이를 SPSS 프로그램을 이용하여 paired t-test로 분석하였다. 본 연구 결과는 다음과 같다. 첫째, 독서교육을 위한 교수-학습 방법을 개발하여 이를 실제 수업에 적용하였다. 독서 활동 후에 개발된 독서 기록 카드와 학습지를 작성하면서 식생활과 관련된 용어를 명확히 이해하고 식생활 문제의 심각성을 깨달아 스스로 해결 방안을 모색할 수 있도록 교수-학습 방법을 개발하고 독서를 활용한 토론 학습을 통해 기술 가정 수업의 흥미를 높이고 의사소통 능력을 기를 수 있도록 하였다. 둘째, 위에서 개발한 교수-학습 방법을 활용한 실험집단과 전통적 강의식 수업을 진행한 통제집단의 사전 사후 검사를 실시하여 비교 분석하였다. 그 결과 전통적 강의식 수업을 진행한 통제집단에 비해 독서교육 교수-학습 방법을 적용한 실험집단 학생들의 기술 가정 수업과 교사에 대한 인식이 긍정적으로 변화한 것으로 나타났다. 또한 실험집단의 경우 실험 처치 후에 식품 선택 태도가 긍정적인 방향으로 변화하였다. 그러나, 실험 처치가 실험집단과 통제집단의 식생활 단원과 독서에 대한 관심도, 식습관에는 영향을 미치지 못한 것으로 나타났다. 이상의 결과에서 독서교육이 기술 가정과 수업의 흥미를 높이고 교사에 대한 인식을 긍정적으로 바꾸는 것으로 나타났으며, 식품 선택의 태도를 향상시키는 것으로 나타났다. 따라서, 학생들이 올바른 식습관을 형성하여 건강한 삶을 영위할 수 있도록 돕기 위해 독서교육을 활용한 다양한 교수-학습 지도안을 개발하고 지속적으로 수업에 활용하여야 할 것으로 사료된다.
본 연구는 중등학교 기술·가정과 교사의 학교교육과정 편성 참여와 고교학점제에 대한 인식을 알아보는데 목적이 있다. 이를 위해 유의표집 방법으로 전국의 중등 기술·가정과 교사 345명의 설문 자료를 SPSS 24를 활용하여 기술통계, t검정, F검증을 통해 분석하였으며, 연구 결과는 다음과 같다. 첫째, 기술·가정과 교사들은 현재 단위 학교에서 기술·가정과 교육과정 편성 시수가 부족하고(61.1%), 교사의 수도 부족(53%)하다고 인식하고, 학교교육과정 편성에 대부분 참여하고 있었으며(62.0%), 향후 학교교육과정 편성 과정에 참여하겠다는 의지도 매우 높았다(4.47, 89.9%). 둘째, 기술·가정과 교사들은 고교학점제 도입에 대해 보통 이상으로 알고 있었고(3.34) 긍정적인 인식(37.7%)보다 부정적인 인식(52.8%)이 많았다. 고교학점제 도입으로 학생들의 진로 선택(3.88)과 전공 분야의 전문내용 심화(3.81)를 긍정적인 영향으로 인식한 반면, 비입시 과목으로 인한 선택 감소(3.90)와 이에 따른 교사 전보의 어려움(3.57) 등을 부정적인 영향으로 인식하고 있었다. 셋째, 기술·가정과 교사들은 고교학점제 도입에 안정적으로 대응하기 위하여 진로선택과목의 조정(4.51), 선택과목의 교수·학습 자료 개발 및 보급(4.46), 기술과 가정의 분리(4.45), 평가방법 및 적용에 대한 연수 제공(4.44) 등을 중요하게 인식하고 있었다. 본 연구는 기술·가정 교과가 차기 교육과정 개정과 고교학점제에 지혜롭게 대비할 수 있는 기초 자료와 고등학교 기술·가정교육과정 편제에 대한 논의의 단초를 마련한 것에 의의가 있다.
연구배경 : 폐암은 우리 나라에서 점차 증가하고 있으며 발생빈도에 있어서는 위암에 이어서 두 번째이고 암에 의한 사망 원인의 첫 번째 원인이 되고 있다. 수술요법이 가장 좋은 치료이나 대부분의 환자들이 진단 당시 수술을 받지 못할 정도로 진행이 되어서 방사선 치료나 항암 치료를 동반한 방사선치료를 받게 된다. 방사선 치료 중 방사선 폐렴의 발생이 제일 중요한 부작용이다. 폐암으로 진단을 받고 흉부 방사선 치료를 시행 받은 환자에서 방사선 폐렴의 발생률 및 치료. 발생 및 중증도를 예측 할 수 있는 인자, 생존에 미치는 영향에 대해서 후향적 조사를 하였다. 방 법 : 충남대학교병원 호흡기 내과에서 폐암으로 진단을 받고 2000년 12월부터 2002년 12월까지 치료 방사선과에서 흉부 방사선 치료를 시행 받은 환자 90명을 대상으로 조사하였다. 결 과 : 90명의 환자 중 44명(48.9%)이 방사선 폐렴으로 진단을 받았으며 33명(36.6%)은 경증, 11명(12.3%)은 중증의 방사선 폐렴이 발생하였다. 중증의 방사선 폐렴 환자는 모두 부신 피질호르몬제를 사용하였으며 호흡 부전으로 내원한 한 환자를 제외한 나머지 10명의 환자들의 처음 평균 투여량은 prednisolone 34 mg(30~40)이었고, 평균 투여일수는 68일(8~97)이었다. 중증 방사선 폐렴이 발생된 경우에 있어서 경증에 비해 중앙 생존일이 의미 있게 낮았다.(p=0.046) 방사선 폐렴 발생과 관련된 인자는 방사선 투여량이 60 Gy 이상인 경우에 통계적으로 의미가 있었다.(p=0.001) 그 외에 활동도, 폐활량, 나이, 흡연, 조직형, 항암 치료와의 병용여부, 1일 방사선 조사 횟수, 방사선 투여 방식은 방사선 폐렴 발생과 통계적으로 의미가 없었다. 또한 중증의 방사선 폐렴 발생을 예측 할 수 있는 인자로 이용 될 수 있는 혈중 요산과 알부민의 농도와 방사선 폐렴의 중증도와는 통계적으로 의미가 없었다. 결 론 : 본 연구에서 60 Gy이상의 총 방사선 조사량이 방사선 폐렴의 발생과 관련이 있었고 조사량과 중증도와도 연관이 있음을 알 수 있었다. 또한 중증의 방사선 폐렴 발생 시 예후가 경증의 환자에 비해 상대적으로 좋지 못했다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.