• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.52-63
• /
• 2012

This study empirically investigated some problems with the criteria for subdividing the management zone in a rural area through a case study of Cheongsong-gun, Gyeongbuk and provided some suggestions for their improvement. To do this, the subdivision criteria in the guideline for developing urban management planning were firstly compared with those of Cheongsong-gun. Next, geographic information system(GIS) was used to do the cross-check analysis between the results from land suitability assessment and those from the subdivision in the management zone and to grasp the spatial relationships of a zone with its neighboring zones by analyzing the zoning inventory and comparing the areas. Finally, map analysis and field survey were conducted to examine the relevance to the actual situation of land use and focus interviews were done to analyze the civil complaint cases resulted from the subdivision in the management zone. This study found out three major categories of problems with the criteria for subdividing the management zone in Cheongsong-gun: the incomplete formalization of zoning, the inadequate decision criteria on the availability of land for development, and the biased consulting of the departments concerned. Some suggestions for their improvement were then provided in this study. The empirical results from this study can be used as the preliminary information for suggesting the right direction of the subdivision in the management zone within the rural areas in the near future.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.379-387
• /
• 2016

In this study, a survey was conducted on the required measurement and waterproofing performance for residential building underground structure leakage prevention system. According to the results of the survey, it has been determined that leakage problem is considered to be quite severe, and many respondents have agreed. The legal guidelines and regulation systems do not reflect properly on the environmental requirements or conditions, resulting in continued leakage problem. In regards to this, a standardized waterproofing technique that can be used in underground areas of residential structures is required as an obligation and the development of high performance waterproofing method that allows for wet concrete surface adhesion and a guideline, design and maintenance method that allows the control of overall situational control of leakage is required.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.1
• /
• pp.49-54
• /
• 2009

The seismic slope stability is most often evaluated by the pseudo-static limit analysis, in which the earthquake loading is simplified as static inertial loads acting in horizontal and/or vertical directions. The transient loading is represented by constant acceleration via the pseudostatic coefficients. The result of a pseudostatic analysis is governed by the selection of the value of the pseudostatic coefficient. However, selection of the value is very difficult and often done in an ad hoc manner without a sound physical reasoning. In addition, the maximum acceleration is commonly estimated from the design guideline, which cannot accurately estimate the dynamic response of a slope. There is a need to perform a 2D dynamic analysis to properly define the dynamic response characteristics. This paper develops a new hybrid pseudostatic method that links the modified one-dimensional seismic site response analysis and the pseudostatic algorithm. The modified site response analysis adjusts the density of the layers to simulate the change in mass and weight of the layers of the slope with depth. Multiple analyses were performed at various locations within the slope to estimate the change in seismic response of the slope. The calculated peak acceleration profiles with depth from the developed procedure were compared to those by the two-dimensional analyses. Comparisons show that the two methods result in remarkable match. The calculated profiles are used to perform pseudostatic analysis. The results show that use of peak or a fraction of acceleration at the surface can seriously underestimate or overestimate the factor of safety, and that the proposed procedure significantly enhances the reliability of a standard procedure.

• Korean Journal of Social Welfare
• /
• v.56 no.2
• /
• pp.215-235
• /
• 2004

A little understood but rapidly growing phenomenon in our society is remarriage. By 2002, 21% of marriage involved the remarriage of one or both partners. Furthermore, the ratio of remarriage of women has outnumbered the ratio of remarriage of men, which is remarkable change compared to the traditional culture putting a taboo on women's remarriage in Korea. The purpose of this study is to construct the perspective and the direction of programs for enhancing the remarriage family functioning. For the purpose, we explore the intrinsic vulnerability to family dissolution of remarriage and ill preparation for remarriage of people. There are unrealistic myths around, lack of informations on, absence of guideline for remarriage family life. Also, we discuss the process of remarriage family development, which leads us to the conclusion that the remarriage shows totally different family structure and family interaction from first marriage nuclear family. Based on discussion mentioned above, several suggestions are provided for developing programs for remarriage family functioning. Above all, the family developmental perspective on remarriage is more useful paradigm rather than deficit-comparison perspective for remarriage family. Also, the programs for remarriage family functioning should challenge the unrealistic myths around remarriage such as the instant love between step-parents and step-children, the re-created nuclear family, etc. Also, several points such as the remarried family developmental stage, the disparity in expectation of man and woman on remarriage, and the tendency to scapegoat a stepmother should be considered in programs for enhancing remarriage family functioning.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.88-95
• /
• 2017

The usage of toxic gas in Korea is increasing in the development of high-tech industries such as semiconductors, displays and solar panels. The recent survey of domestic toxic gas consumption indicates an increase in annual average of 12.4 percent, but it is still focused on usage, and it is negligent in safety and treating the post. In September 2012, an accident occurred in Gu-mi involving hydrofluoric acid leak demonstrates the absence of safety management. Due to the incident, the government, industry and academia have been interested in chemical substances(toxic gas), and the government-led safety management has been established and implemented, but there are still a lot of safety blind spots. The purpose of this study is to develop effective measurement methods for the destruction or removal efficiency of gaseous materials emitted from the Scrubber used in the semiconductor and display industries. Also, this study demonstrated how toxic gas facilities can be applied without error by verification test for the measurement method guideline of the destruction or removal efficiency of the green-house gas reduction facility in the semiconductor and display industries used by the National Institute of Environmental Research and the UNFCCC, and suggested the differentiated measurement methods for toxic gas reduction facilities, and the third party certification for safety facilities is needed to prevent toxic gas accidents.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.29-43
• /
• 2015

Objective: The aim of this study is to develop management guidelines and a procedure for an anthropometric suitability assessment of the main control room (MCR) in nuclear power plants (NPPs). Background: The condition of the MCR should be suitable for the work crews in NPPs. The suitability of the MCR depends closely on the anthropometric dimensions and ergonomic factors of the users. In particular, the MCR workspace design in NPPs is important due to the close relationship with operating crews and their work failures. Many documents and criteria have recommended that anthropometry dimensions and their studies are one of the foremost processes of the MCR design in NPPs. If these factors are not properly considered, users can feel burdened about their work and the human errors that might occur. Method: The procedure for the anthropometric suitability assessment consists of 5 phases: 1) selection of the anthropometric suitability evaluation dimensions, 2) establishment of a measurement method according to the evaluation dimensions, 3) establishment of criteria for suitability evaluation dimensions, 4) establishment of rating scale and improvement methods according to the evaluation dimensions, and 5) assessment of the final grade for evaluation dimensions. The management guidelines for an anthropometric suitability assessment were completed using 10 factors: 1) director, 2) subject, 3) evaluation period, 4) measurement method and criteria, 5) selection of equipment, 6) measurement and evaluation, 7) suitability evaluation, 8) data sharing, 9) data storage, and 10) management according to the suitability grade. Results: We propose a set of 17 anthropometric dimensions for the size, cognition/perception action/behavior, and their relationships with human errors regarding the MCR design variables through a case study. The 17 selected dimensions are height, sitting height, eye height from floor, eye height above seat, arm length, functional reach, extended functional reach, radius reach, visual field, peripheral perception, hyperopia/myopia/astigmatism, color blindness, auditory acuity, finger dexterity, hand function, body angle, and manual muscle test. We proposed criteria on these 17 anthropometric dimensions for a suitability evaluation and suggested an improvement method according to the evaluation dimensions. Conclusion: The results of this study can improve the human performance of the crew in an MCR. These management guidelines and a procedure for an anthropometric suitability assessment will be able to prevent human errors due to inadequate anthropometric dimensions. Application: The proposed set of anthropometric dimensions can be integrated into a managerial index for the anthropometric suitability of the operating crews for more careful countermeasures to human errors in NPPs.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.22 no.4
• /
• pp.271-286
• /
• 2011

Objectives : The purposes of this study were to develop a mental health screening questionnaire and the practical intervention programs or guidelines which can be used in middle and high schools by students and teachers. Methods : The Adolescent Mental health & Problem behavior Screening Questionnaire II (AMPQ-II) was developed and was tested for reliability and validity using nationwide data from 2,180 middle and high school students and 2,145 teachers. Results : The AMPQ-II was measured by both students and teachers. The correlation coefficient of the test-retest test was 0.567 and internal consistency was high (Cronbach's alpha=0.878). Five factors such as worry and thought, mood and suicide, academic and Internet-related problems, peer problems, and rule violations were proposed. We also developed a practical guideline and manuals which can be easily used by secondary school teachers to screen for and manage mental health problems at school. Conclusion : The AMPQ-II can be a useful and reliable tool to screen for mental health problems in middle and high schools in South Korea.

• Korean Journal of Community Nutrition
• /
• v.17 no.2
• /
• pp.167-181
• /
• 2012

Our society is aging rapidly, and the number of elderly people who are in charge of purchasing and preparing foods at home is increasing. However, most the elderly have difficulty managing nutrition and food safety by themselves. The purpose of this study was to develop the necessary knowledge, through focus group interview and Delphi technique to establish a food safety and nutrition education program. The diet and educational needs of the elderly were surveyed through FGI. The education topics were decided by the Delphi technique. The education program consisted of a five week program, and the topics taught were 'Dietary Change for Healthy Life', 'Prevention of Food Poisoning in Everyday Life', 'Safe Food Handling for my Health', 'Healthy Dietary Life to Prevent Chronic Disease', and 'Safety! Nutrition! Healthy Dietary Life'. This education program was designed to decrease the perceived barriers, and to increase the perceived interests and the sense of self-efficacy. Education program materials, lesson plans, slides, handouts, videos, leaflets, and booklets were developed. Based on the results, the contents of the food safety guideline leaflets for the elderly were decided as the following: (1) wash your hands in the correct way; (2) select safe food; (3) cook foods safely; (4) keep foods safely; (5) keep kitchen utensils clean. In conclusion, if advanced education programs are implemented and delivered continuously in locations such as health centers and community welfare centers, those will contribute significantly to enhance the perception of food safety and to change the desirable dietary behavior of the elderly.

• Particle and aerosol research
• /
• v.6 no.1
• /
• pp.9-20
• /
• 2010

This study examined the concentration level of the major air pollutants in public transportation. The study was conducted between February 2009 and March 2008 at Suwon-Yeosu line in Korea. $PM_{10}$ concentration level was $100{\mu}g/m^3$ on average. The $PM_{2.5}$ to PM10 ratio in transport is 0.37, which was lower than the results published by other researches. The result also demonstrated that outdoor $PM_{10}$ concentration was about 56~60% level compared to that of the cabin. $CO_2$ concentration level in the cabin was 1,359ppm, which does not exceed 2,000ppm, which is the guideline concentration level according to the Ministry of Environment. $CO_2$ concentration level in the cabin was $CO_2=23.4{\times}N+460.2$, and about 23.4ppm in $CO_2$ concentration level increased every time one passenger was added on. The experiment conducted on the train demonstrated that the average $PM_{10}$ concentration level was $100{\mu}g/m^3$ in case of the reference cabin while average $PM_{10}$ concentration level of the modified vehicle was $68{\mu}g/m^3$. Likewise, effect of the particle reduction device for the reduction of $PM_{10}$ concentration level was approximately 21%. Meanwhile there was almost no difference in the concentration level between reference and modified cabin in case of $PM_{2.5}$. Using zeolite as an adsorbent was made to reduce the $CO_2$ concentration level in the cabin. Number of passengers was factored in, to calculate the effect of the adsorption device, which demonstrated that about 36% of $CO_2$ concentration level was reduced in the modified cabin effect of the $CO_2$ reduction device. This research analyzed the current status concerning the quality of air in the public transportation and technologies were developed that reduces major air pollutants.

• YAKHAK HOEJI
• /
• v.54 no.5
• /
• pp.348-353
• /
• 2010

The dissolution test method and an analytical procedure by HPLC were developed and validated for viquidil hydrochloride capsules and alibendol tablets. These drugs were not yet characterized by the dissolution specifications in Korean Pharmaceutical Codex. So, with each reference and test drugs, we did the preliminary and standard experiments based on the Korean Pharmacopeia Guideline of dissolution testing for solid oral dosage forms. The dissolution test for viquidil hydrochloride capsules was carried out under sink conditions as follows: dissolution medium water, paddle rotation speed 50 rpm and vessel volume 900 ml. More than 90% of its label amount was released within 30 min in this method. Also the dissolution test for alibendol tablets was carried out under sink conditions as follows: dissolution medium water, paddle rotation speed 100 rpm and vessel volume 900 ml. More than 90% of its label amount was released within 45 min in this method. The dissolution samples were analyzed with a precise and accurate HPLC method. The developed dissolution test showed specificity, linearity, precision and accuracy within the acceptable range. The dissolution testing method described above was adequate for the purpose and may be proposed as a pharmacopeial standard to assess the performance of viquidil hydrochloride capsules and alibendol tablets.