• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.629-634
• /
• 2000

This System is developed for the estimation of the Camera Lens Resolution. Signal data proportional to light intensity is obtained and sampled from the 2D CCD. Based on the measured signal. the MTF charateristcs of a camera lens are measured. We could measure the sagittal and tangential MTF in the on and off-axis at the same time. The automatic measurig methods for optimal image plane, magnification, and best marginal direction of test lens are presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1421-1429
• /
• 2015

During the six years from 2006 to 2011, based on a study of projects with an area equivalent to or less than $2,700m^2$ located in Jeju self-governing province, it was shown, through comparison with the pre-existing calculation methods, that there were many problems with the application of the standard cost. Accounting for the uniqueness of Jeju province, the study suggested an alternative method for applying the standard cost, basing it on property usage of either urban area or non-urban area pursuant to the National Land Planning and Utilization Act rather than land type of either mountain area or non-mountain area, with the utilization of T-test and ANOVA raising the reliability of this study.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.179-184
• /
• 2018

In this paper, we have proposed the development of DC-DC converter for LRT power supply. First of all, we have studied converter technology, main functions and characteristics were determined. In also, the converter design was carried out to meet the system design conditions. Based on this design, converter simulation is performed to enable stable charging and discharging of the vehicle system. We have performed the Light-load test according to charge mode, discharge mode. As a result, the manufactured converter performance was verified through the load test, and it's stability was confirmed.

• International journal of advanced smart convergence
• /
• v.6 no.4
• /
• pp.50-55
• /
• 2017

Workers' demands for new applications, especially mobile applications, are increasing. Many industry analysts, researchers and corporate executives say the demand for mobile applications is becoming increasingly difficult to follow in the IT department. Gartner predicts that by 2021, the demand for mobile application development within the enterprise will increase about five times faster than IT can deliver applications. The purpose of this paper is to provide an environment where non-developers who are in charge of business development can develop apps and webs for their work. The basic concept of a new innovative App development tool, Smart Maker Authoring Tool is to develop Apps on the level using easy-to-learn Word or Excel in a computer. The main feature is that the app is developed by a non-developer worker. The coding technology is perfectly optimized to the structure and operation mechanism of the IT Infra such as hardware devices and operating system, which are the targets for implementing a desired function. Rather, it shows excellent software productivity. The most important feature of future business development is that it is developed by a non-developer worker. In this paper, we propose a no-code and low-code platform for non - developers to develop their business. In the future, we will link the IoT based Arduino system and artificial intelligent interpretation system.

• Journal of the Korea Convergence Society
• /
• v.5 no.3
• /
• pp.23-27
• /
• 2014

In recent times, there is an increasing interest in wireless charge of smartphones and devices, and many companies are developing wireless charges. The range of application of wireless charge would be expanded to almost all electronics, including not only mobile devices, but also notebook computers and vacuum cleaners. On-line electric vehicles are to be launched in the market this year in a massive scale. As such wireless charge-related markets are inexhaustible. Wireless charge is included in the world's top 10 promising technologies, and its rapid growth is expected to have annual growth by more than 100%. However, there's a need to establish a safe environment, by analyzing security threats to technical limitations and harmfulness to human body, and arrange institutional compliments. The development of communication method for a variety of wireless charging are delivering comfortable and safe information. This paper aims to examine the factors to threaten electric vehicle, which are usually intruded through network system and analyzes security threats to and security requirements for magnetic resonance mode-based wireless charge in mobile devices, and suggests security requirements.

• Journal of Agricultural Extension & Community Development
• /
• v.11 no.1
• /
• pp.191-207
• /
• 2004

This study was focused on the development of greenhouse management and environmental control system using internet. The essence of this system were remote automatic control unit connected with greenhouse environmental control according to the growth stages of crops, The specific objectives of the study were; 1) to analyze need of greenhouse environmental remote control system, 2) to investigate the important functions related to greenhouse management program, 3) to explore the possibility of diffusing the system using internet.The study was carried out through review of related literature and need assessment from the research and extension workers in charge of greenhouse management using questionnaire survey, interview and field study. The results of the study were summarized as fallows: 1) About 89% of respondents responded positively on the need to establish automatic control system using internet. 2) The greenhouse management and environmental control system using internet was possible to control the greenhouse in remote, automatic, and simultaneous manner, and additionally by cellular phone in emergent situation. 3) The system was possible to precisely control the greenhouse environment, and it was able to connect the environmental control data with information on growth of crops. 4) By networking the farmer, extension educator of agricultural technology center and researcher, web based farm consulting was possible through the system. Based on the results of the study recommendations were suggested as follows: 1) Thorough spot inspections and field trials should be performed before the diffusion of this system. 2) The costs of the system installation and maintenance should be moderate. 3) The operation of the system should be simple and easy for tamers to adopt. 4) National support should be made to build better internet infrastructure in rural areas.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.403-406
• /
• 2007

A New S-PVA which is named as charge-shared super PVA (CS S-PVA) LCD mode is proposed. CS SPVA controls the voltage ratio of low pixel by sharing system between low pixel and control cap, resulting in improved off-axis image quality and transmittance increase without any side effects. Moreover, the new S-PVA LCD mode is free of image-sticking. Operating schemes and display performance of CS S-PVA are presented.

• Korean Journal of Acupuncture
• /
• v.26 no.1
• /
• pp.51-60
• /
• 2009

Objectives : It is considered not easy to diagnose the condition of acupoints or meridians. Oriental Medical instruments have rarely complied with Oriental Medical diagnostic/therapeutic theories. The aim of this study was to develop a system which measures meridian electric potential(MEP) in proportion to bio-electric charge for the purpose of Oriental Medical diagnosis. Method : To evaluate a meridian energy measurement system(MEMS), we carried out a performance test. For significance test, we conducted a clinical trial which measured the MEP of ST36(Chok-samni) on Stomach Meridian(ST). Results & Conclusions : We could evaluate the balance or the imbalance of the MEPs on the left/right ST36. Also, through the comparison of MEPs before and after meals, we could identify the correlation between the MEP and the condition of internal organs. Namely, MEP reflects the condition of acupoints/meridians and internal organs, therefore, we propose this new method for measuring and analyzing the condition of meridians and acupoints for Oriental Medical diagnosis.

• Advances in environmental research
• /
• v.1 no.4
• /
• pp.237-255
• /
• 2012

We review the research literature on relationship between environmental regulation and industrial development in three aspects of environmental regulation and investment, environmental regulation and efficiency, environmental regulation and trade. Indeed, the linkage between environmental regulation and material consumption of industrial system is absent. Environmental regulation is measured as the expenditure share for industrial pollutants abatement, and effluent charge intensity. Using panel-level data from 31 provinces, municipalities and autonomous regions in China, we build correlation models between material consumption and environmental regulation, results show that: (1) there are significant quadratic function relationship between material consumption and environmental regulation. And there is the fact that inflection point exists. (2) On basis of inflection points, we make two remarkable reflections. Firstly, the inflection points are the most important scale to judge reasonability and performance of regulations. Secondly, a Pareto improvement may occur when the regulations achieve a certain target. (3) Both intensities of industrial pollutants abatement expenditure and effluent charge have not yet achieved the expected target in most regions of mainland China at present. And most of regions of material consumption decreasing are distributed in western China. Main reasons lie in the impacts of industrial features as well as the regulations.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.187-195
• /
• 2010

IP camera which transmits image signal in network includes web server, network interface unit and CCD(Charge-Coupled Device) module. IP camera is able to transmit image signals by network in real time and to monitor the scene image always by IP or Web address. IP camera is substituted for analog camera now gradually according to the development and progress of camera technology and expect it to extend the boundary in rolling stock gradually cause of the excellent expansibility and noise solution of analog camera. We survey the IP camera system composition in rolling stock and so this can be a help to develop and design IP camera system, because it has unsolved problems for common use of IP camera.