• 펄프종이기술
• /
• 제41권4호
• /
• pp.73-81
• /
• 2009

The document archives like official documents, books, maps and historic paper artifacts are primarily based on the organic cellulosic materials. As the passage of time, these organic cellulosic materials are slowly deteriorated by various aging factors, like light, polluted air and biological fungi. Many researchers have been carried out the examination method of deteriorating origins, the mechanism of aging hysteresis, and the preserving method of archival materials. One of the most simple and easiest ways for conservation of organic archival documents is the proper storage under environmental control. Corrugated board for archival quality container has been developed and already used in advanced country, like Japan, USA, German, UK and Europe. In case of Korea, corrugated board for archival quality container has been used a decade ago, but totally imported. This study was tried to develop the corrugated board for archival quality container. Liner and corrugated medium were specially produced and finally manufactured to E flute corrugated board. The physical and strength properties of permanent base paper and corrugated board were evaluated, and compared with imported corrugated board. 4 kinds of corrugating adhesives were considered various in order to investigate optimum adhesive for flute development between liner and corrugating medium, and evaluate adhesion strength under conditions of storage and curing temperatures.

• 해양환경안전학회지
• /
• 제25권1호
• /
• pp.9-17
• /
• 2019

본 연구는 상선 해기사를 양성하는 교육부 소속의 해기교육기관을 중심으로 위탁승선실습 실시 목적 및 위탁승선실습생 관리에 관한 법적 근거를 조사하고, 설문조사를 통해 위탁승선실습생 관리 현황을 분석하였으며, 이를 토대로 프로그램을 개발하는 절차로 연구를 수행하였다. 연구 결과, 위탁승선실습생 관리에 대한 법적 근거가 마련되어 있음에도 불구하고 승선실습 관리에 대한 만족도가 높지 않고, 감독기관의 실습생 관리 시스템도 허술한 것으로 나타났으며, 이에 따라 위탁승선실습생의 안전사고 발생 및 실습을 중도에 포기하는 학생이 적지 않게 발생하고 있는 것으로 나타났다. 이에 위탁승선실습생의 안전하고 체계적인 관리를 위한 I.M.S.A.R. 모델(정보제공-모니터링-공유-경보발생-대응)을 도출하였으며, 이를 토대로 웹 기반의 위탁승선실습생 인적자원관리 프로그램을 개발하였다. 본 연구는 위탁승선실습생 관리를 위한 실질적인 방안을 도출하였다는 점에서 의미가 있는 연구라고 할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.449-452
• /
• 1998

In this study, the basic image-board and algorithm has been developed to extract a road lane by modeling the driving process. The high speed processing enables an image capture, processing and prompt decision making. In order to high speed processing ASIC like FPGA was designed and integrated in one board system. The algorithm enabling road driving must recognize a straight and bend edge separately. The high speed image processing board using FPGA can be used in real-time decision makeing system for road driving and in the machine vision under bad working environments like a coal mine. And it also can be used in the safety control system in subway and in image input system of CCTV and CATV by designing the board to meet various user's needs.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.130-136
• /
• 2000

Generally, the build-up printed circuit board manufactured by the sequential process with etching, plating, drilling etc. requires many types of equipments and lead time. Etching process is suitable for mass production, however, it is not adequate for manufacturing prototype in the developing stage. In this study, we introduce a screen printing technology to prototyping a build-up printed circuit board. As for the material, photo/thermal curable resin and conductive paste are used for the formation of dielectric and conductor. The build-up structure is made by subsequent processes such as the formation of liquid resin thin layer, the solidification by UV/IR light, and via filling with conductive paste. By use of photo curable resin, productivity is greatly enhanced compared with thermal curable resin. Finally, the basic concept and the possibility of build-up printed circuit board prototyping are proposed in comparison with to the conventional process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.80-83
• /
• 2004

Previously, in order to send information from the local controller to the display board, the hardware or software had to be handled and run through 3-phases, which include the PC-card or PC-add Board, I-F card and Sub board. This study will attempt to design a board that handles information by connecting the USB port of the PC directly to the Sub board. In addition, an MPU will be attached to the previously complex hardware circuit to design a software drive engine module, which allows for the development of new products by modifying only the software engine and not the hardware.

• 전기학회논문지P
• /
• 제53권1호
• /
• pp.7-13
• /
• 2004

Previously, in order to send information from the local controller to the display board, the hardware or software had to be handled and run through 3-phases, which include the PC-card or PC-add Board, I/F card and Sub board. This study will attempt to design a board that handles information by connecting the USB port of the PC directly to the Sub board. In addition, an MPU will be attached to the previously complex hardware circuit to design a software drive engine module, which allows for the development of new products by modifying only the software engine and not the hardware.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.50-55
• /
• 1998

This study was carried out to develop low density board made of rice hull which needs proper use. Urea formaldehyde adhesive(UF) was used. The raw materials were the mixtures of the rice hulls from IllFum, DongGin, ChuChong, etc. The physical and mechanical properties of rice hull insulation board were examined. The results are as follows : For the thickness of 15mm of the low density rice hull board bonded with UF resin, proper manufacturing conditions were $171^{\circ}C$ of hot pressing temperature with thickness bar for optimum density, 12 percent of resin solid contents of rice hull ovendry weight, and 20 minutes of hot pressing time. These conditions meet Korean standards(KS 3201-1982) in relation to free formaldehyde emission, bending strength, water absorption and heat resistance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2324-2326
• /
• 1998

Plant controller using VME bus is developed. This controller is a PLC designed to control up to 768 I/O units of POSFA PLC which has been developed already by POSCON. In many programming aspects, it adopts IEC 1131, international standard of PLC programming to keep up with international trends. A system software and a controller architecture including CPU board, DSP board and bus extension board are developed to support the IEC 1131, and becomes a base of E.I. controller being developed now.

• 대한임베디드공학회논문지
• /
• 제2권4호
• /
• pp.214-220
• /
• 2007

Recently, most embedded systems have the multi-functions mixed the hardware with the software. The existing sequence programming methods are not suitable to implement the embedded system with multi-functions. So, it can be overcome the limit of a facility implementation by introducing the operating system in system. Also, due to the requirement about the better convenient and comfortable meeting or lecture environment, the necessity of electronic white-board is getting higher. Specially, the education using multimedia information is much more desirable for various and improved lecture at the high school and the university. But the sequence program which have been managed in existing electronic white-board system has some difficulties to achieve the software-oriented systems which has to accomplish many functions. In this paper, we propose the method to implement a facility of electronic white-board through using the embedded linux with excellent performance. The embedded linux presents the powerful software environment for the implementation of an embedded system and makes the realization of many various functions easy because it follows kernel characteristics of linux. In this paper, we describe the details for the structure of hardware, kernel source and device driver of a developed electronic white-board.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.592-595
• /
• 2003

In this paper, we have designed a Home Networking System using an embedded linux board. The system based on the World-Wide-Web is composed of three parts - a Server, a Client and a Simulator. The Home Networking Server is built in an embedded board using an embedded linux kernel. A web-server and Home Networking Server Seryice Demon programming with a Jaya-Language is included in the board. Clients can connect to the server board using a web-browser in the desktop computer, PDA or any other machines which include a web-browser. For this purpose, we made the client program using a Java-Applet. So, the clients who connect to the server for the control of the applications, download the class-file and execute the client-program in the web-browser. So, the clients don't need any other programs to control the applications from a remote place. The size of server board is very small (86.3$\times$74mm), which makes it very useful not only for the Home-Networking-System but also in many other fields, e.g., embedded robot control system, etc. Using an embedded board instead of a desktop computer is good for a simple network environment and it occupies only a small space to make the system.